This study investigates carbon deposition behavior of porous iron whiskers in a CO–CO₂–H₂ gas atmosphere, aiming to enhance carbon recycling strategies for the Carbon Recycling Ironmaking Process using Deposited carbon iron ore composite (CRIP-D), a fossil-free alternative to traditional blast furnace ironmaking. The porous iron whisker, characterized by high porosity (~95%) and obtained from carbon-iron oxide composites, serves as a carbon deposition catalyst. Experiments revealed a two-stage carbon deposition process: the initial stage involves the formation of cementite (Fe₃C), while the later stage involves the metastable iron carbide Fe₅C₂, whose decomposition yields nano-sized iron particles that catalyze the growth of carbon filaments.The analyses of carbonization degree trends, sample morphology, and SEM/XRD indicate that Fe₅C₂ plays a crucial role in facilitating the second-stage carbon filament formation. In-situ high-temperature XRD experiment confirmed this transformation and correlated the decline in Fe₅C₂ peak intensity with carbon filament growth. The sulfur content in porous iron, higher than that in electrolytic iron, stabilized iron carbide formation and suppressed premature free carbon deposition.These findings highlight the significance of controlling carbide phase evolution for efficient carbon deposition. Understanding this relationship supports the development of effective carbon recycling within the CRIP-D framework, reducing CO₂ emissions while enabling the use of non-fossil carbon sources in large-scale ironmaking.
Precise control of sinter reducibility is essential for stable blast furnace operation. Each mineral phase present in sinter, such as hematite, magnetite and calcium ferrite exhibits different reducibility. In XRD analysis, the requirement for sample pulverization leads to the loss of mineralogical texture information. This makes it difficult to quantitatively correlate the complex mineral phases present in the sinter with reducibility. This study introduces a novel quantitative approach using hyperspectral imaging to distinguish specific mineral morphologies. Reduction experiments simulating blast furnace thermal and gas conditions were conducted on several sinters. Multiple regression analysis was applied to correlate mineral fractions and macroporosity with reduction rates across three distinct reduction stages. In the low-temperature stage, hematite, macroporosity and acicular calcium ferrites were identified as the primary drivers of reduction. In the intermediate stage, acicular calcium ferrites continued to enhance reactivity, whereas coarse calcium ferrite showed a significant negative influence. In the high-temperature stage, macroporosity strongly promoted reduction, while coarse calcium ferrite and magnetite hindered it due to the formation of shell-like metallic iron structures which impede gas diffusion. These findings demonstrate that hyperspectral imaging combined with multi-stage regression analysis offers a useful tool for designing optimal sinter mineralogy for blast furnace performance.
Iron ore‒carbon composites enable rapid reduction through direct contact between the reducing agent and iron oxide, offering a promising route for mitigating CO2 emissions. Coke used in such composites typically contain sulfur, which influences the reduction behavior of iron oxides. Although the effects of inorganic sulfur have been reported, the influence of organic sulfur — accounting for more than half of the total sulfur in coke — remains unclear, particularly in systems employing biomass char.Brazilian hematite ore and biomass char were mixed with sulfur additives, namely dibenzothiophene and dibenzyl disulfide as organic sulfur sources and FeS as an inorganic sulfur source, and press-shaped into tablet samples. The samples were heated up to specific temperatures at a constant heating rate under Ar-N2 gas flow. The gas generated from the sample was quantitatively analyzed by gas chromatography, and the heat flow was simultaneously monitored. Based on enthalpy balance and gas concentration, the overall reaction was decoupled into fundamental elementary reactions, allowing thermodynamically corrected gas compositions to be obtained. The oxygen partial pressure (pO2) was then estimated from the corrected gas compositions under equilibrium assumptions to elucidate the reaction paths.The results indicate that sulfur influences the reduction behavior primarily through the water-gas shift reaction rather than the CO/CO2 equilibrium. The reduction temperature of Fe3O4 decreased slightly in the presence of sulfur, following the order: inorganic sulfur-containing > organic sulfur-containing > sulfur-free composites. These findings demonstrate that organic sulfur species such as dibenzothiophene exert a weaker influence on iron oxide reduction compared with inorganic sulfur, owing to their lower persistence as FeS during heating.