Three-dimensional capturing of underwater archeological sites or sunken shipwrecks can support important documentation purposes. In this study, a novel 3D scanning system based on structured illumination is introduced, which supports cultural heritage documentation and measurement tasks in underwater environments. The newly developed system consists of two monochrome measurement cameras, a projection unit that produces aperiodic sinusoidal fringe patterns, two flashlights, a color camera, an inertial measurement unit (IMU), and an electronic control box. The opportunities and limitations of the measurement principles of the 3D scanning system are discussed and compared to other 3D recording methods such as laser scanning, ultrasound, and photogrammetry, in the context of underwater applications. Some possible operational scenarios concerning cultural heritage documentation are introduced and discussed. A report on application activities in water basins and offshore environments including measurement examples and results of the accuracy measurements is given. The study shows that the new 3D scanning system can be used for both the topographic documentation of underwater sites and to generate detailed true-scale 3D models including the texture and color information of objects that must remain under water.

This paper shows how to use the result of Google's SLAM solution, called Cartographer, to bootstrap our continuous-time SLAM algorithm. The presented approach optimizes the consistency of the global point cloud, and thus improves on Google’s results. We use the algorithms and data from Google as input for our continuous-time SLAM software. We also successfully applied our software to a similar backpack system which delivers consistent 3D point clouds even in absence of an IMU.

In-situ calibration of structured light scanners in underwater environments is time-consuming and complicated. This paper presents a self-calibrating line laser scanning system, which enables the creation of dense 3D models with a single fixed camera and a freely moving hand-held cross line laser projector. The proposed approach exploits geometric constraints, such as coplanarities, to recover the depth information and is applicable without any prior knowledge of the position and orientation of the laser projector. By employing an off-the-shelf underwater camera and a waterproof housing with high power line lasers an affordable 3D scanning solution can be built. In experiments the performance of the proposed technique is studied and compared with 3D reconstruction using explicit calibration. We demonstrate that the scanning system can be applied to above-the-water as well as underwater scenes.

This paper presents an underwater laser scanning system and GNSS based trajectory estimation system for scanning from a surface vessle in shallow water. The system has an above-the-water and an underwater component. Above-the-water two low-cost multiband GNSS receivers with an antenna baseline of one meter are used for RTK positioning with heading. The full 6-DOF is estimated by fusing the satellite navigation data with a MEMS-based INS. The 3D data is captured in water using a structured light scanner consisting of a low-light underwater camera and a green cross line laser projector. We describe the development of the system and employed hardware components. We show results of scanning a large test object in a water tank acquired by from a tripod with a motorized yaw axis. Additionally, we demonstrate first results of mobile mapping from a floating platform. We evaluate the performance of the system by measuring the 6-DOF trajectory with an external optical tracking system. Additionally, we assess the quality of the created point cloud using reference objects placed in the scene.

A new underwater 3D scanning device based on structured illumination and designed for continuous capture of object data in motion for deep sea inspection applications is introduced. The sensor permanently captures 3D data of the inspected surface and generates a 3D surface model in real time. Sensor velocities up to 0.7 m/s are directly compensated while capturing camera images for the 3D reconstruction pipeline. The accuracy results of static measurements of special specimens in a water basin with clear water show the high accuracy potential of the scanner in the sub-millimeter range. Measurement examples with a moving sensor show the significance of the proposed motion compensation and the ability to generate a 3D model by merging individual scans. Future application tests in offshore environments will show the practical potential of the sensor for the desired inspection tasks.

A novel 3D sensor system for underwater application is presented, primarily designed to carry out inspections on industrial facilities such as piping systems, offshore wind farm foundations, anchor chains, and other structures at deep depths of up to 1000 m. The 3D sensor system enables high-resolution 3D capture at a measuring volume of approximately 1 m³, as well as the simultaneous capture of color data using active stereo scanning with structured lighting, producing highly accurate and detailed 3D images for close-range inspection. Furthermore, the system uses visual inertial odometry to map the seafloor and create a rough 3D overall model of the environment via Simultaneous Localization and Mapping (SLAM). For this reason, the system is also suitable for geological, biological, or archaeological applications in underwater areas. This article describes the overall system and data processing, as well as initial results regarding the measurement accuracy and applicability from tests of the sensor system in a water basin and offshore with a Remotely Operating Vehicle (ROV) in the Baltic Sea.