Shabeeb Alajmei

Shabeeb Alajmei

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2023 in ACS Omega
Verified
Journal Article
Open access
OBOse Budiman
Ose Budiman
SAShabeeb Alajmei
Shabeeb Alajmei
Hydraulic fracturing uses a large amount of fresh water for its operation; conventional wells can consume up to 200 000 gallons of water, while unconventional wells could consume up to 16 million gallons. However, the world's fresh water supply is rapidly depleting, making this a critical and growing problem. Freshwater shortages during large-scale hydraulic fracturing in regions that lack water, such as the Arabian Peninsula and offshore operations, need to be addressed. One of the ways to address this problem is to substitute fresh water with seawater, which is a sustainable, cheap, and technically sufficient fluid that can be utilized as a fracturing fluid. However, its high salinity caused by the multitude of ions in it could induce several problems, such as scaling and precipitation. This, in turn, could potentially affect the viscosity and rheology of the fluid. There are a variety of additives that can be used to lessen the effects of the various ions found in seawater. This review explains the mechanisms of different additives (e.g., polymers, surfactants, chelating agents, cross-linkers, scale inhibitors, gel stabilizers, and foams), how they interact with seawater, and the related implications in order to address the above challenges and develop a sustainable and compatible seawater-based fracturing fluid. This review also describes several previous technologies and works that have treated seawater in order to produce a fluid that is stable at higher temperatures, that has a considerably reduced scaling propensity, and that has utilized a stable polymer network to efficiently carry proppant downhole. In addition, some of these previous works included field testing to evaluate the performance of the seawater-based fracturing fluid.

28 March 2025 in ACS Omega
Verified
Journal Article
Open access
MSMian Umer Shafiq
Mian Umer Shafiq
SAShabeeb Alajmei
Shabeeb Alajmei
Murtada AljawadMurtada Aljawad
Murtada Aljawad
LWLei Wang
Lei Wang
ABAshtiwi Bahri
Ashtiwi Bahri
The article provides a comprehensive overview of the selection of proppants in hydraulic fracturing for unconventional reservoirs. Proppants are essential for maintaining the conductivity of hydraulic fractures in well production. The industry has developed various types of proppants, including silica, ceramic, and advanced ultralightweight proppants. The paper covers the fundamentals of proppants, their types, compositions, geometries, and novel technologies for downhole pumping and placement of proppants, as well as in situ generation of proppants. Proppants are critical to improving hydrocarbon recovery as they keep the fractures open, which increases the overall hydrocarbon recovery. The selection of proppants must be tailored to the geological conditions of the reservoirs, and their performance is evaluated based on compatibility with the reservoir and rheological properties. Proppants must withstand closure stresses and diagenesis to ensure long-term fracture conductivity. Regarding proppant size, larger sizes maximize initial production, and smaller sizes allow for a slower long-term decline. Proppant crushing is a significant concern as it affects fracture conductivity. Factors influencing proppant crushing include proppant diagenesis, which refers to the chemical and physical changes proppants undergo in the reservoir. The development of various proppants, including sand, ceramic, resin-coated, curable resin-coated, lightweight, sintered, high-strength, and ultralightweight proppants, each with its advantages and limitations, is also discussed. Case studies from the Bakken and Marcellus Shale Formation demonstrate the impact of proppant selection on well production. Then, the economic optimization of proppant selection, considering factors like payout, internal rate of return, and net present value, is emphasized. The review also covers advancements in proppant technologies, such as multifunctional proppants, traceable proppants, and coated proppants. The potential of in situ proppant generation and the use of ultralightweight proppants are also discussed. The paper concludes with insights into the challenges and considerations for selecting proppants in unconventional reservoirs, stressing the importance of economic optimization and compatibility with fracturing fluids.

17 December 2024 in SPE Journal
Verified
Journal Article
Closed access
JAJawad Al-Darweesh
Jawad Al-Darweesh
Murtada AljawadMurtada Aljawad
Murtada Aljawad
Muhammad Shahzad KamalMuhammad Shahzad Kamal
Muhammad Shahzad Kamal
Mohamed MahmoudMohamed Mahmoud
Mohamed Mahmoud
SAShabeeb Alajmei
Shabeeb Alajmei
DADhafer Al-Shehri
Dhafer Al-Shehri
Summary: This research fully investigates the impact of chelating agent pH, chelating agent’s type, water chemistry, and viscoelastic surfactant (VES) concentration on the rheology and stability of CO2 foam under harsh reservoir conditions. In this regard, a modified high-pressure high-temperature (HPHT) foam rheometer and HPHT foam analyzer were implemented to study the foam rheology and stability at 100°C and 1,000 psi. Additionally, the HPHT viscometer and drop shape analyzer were utilized to understand the role of physicochemical properties on the microstructure, stability, and rheology of CO2 foam. First, the role of L-glutamic acid N,N-diacetic acid (GLDA) pH on the foam properties and foam rheology was investigated; the results showed that GLDA has a significant effect on the viscosity, stability, and foamability of CO2 foam. The optimum foam viscosity was achieved with a GLDA pH of 3, while the highest stability was attained with a GLDA pH ranging between 4 and 7. The highest foamability was achieved with low GLDA pH (3 to 2) due to the formation of high bubble numbers with uniform fine texture. Second, different chelating agents were considered; low pH GLDA provided the highest foam viscosity and stability among diethylene triamine pentaacetic acid (DTPA) salt and ethylenediaminetetraacetic acid (EDTA) disodium salt, while high pH EDTA exhibited the highest foamability. Additionally, three types of water were studied: produced water, sea water, and formation water. The outcomes showed that water salinity significantly impacts the foam formation process, where the formation water presented poor foamability. Finally, the concentration of surfactant has a major effect on the viscosity of CO2 foam; it reached 150 cp at 100/s once the concentration increased to 6 wt%. This study provides a comprehensive understanding of the impact of additives and water chemistry on VES behavior for CO2 foam. Also, the usage of erucamidopropyl hydroxypropylsultain (SURF) is promising for the generation of high stability and foam viscosity at high salinity and high temperature and pressure.

25 April 2024 in ACS Omega
Verified
Journal Article
Open access
JAJawad Al-Darweesh
Jawad Al-Darweesh
Murtada AljawadMurtada Aljawad
Murtada Aljawad
ZEESHAN TARIQZEESHAN TARIQ
ZEESHAN TARIQ
SAShabeeb Alajmei
Shabeeb Alajmei
BYBicheng Yan
Bicheng Yan
Muhammad Shahzad KamalMuhammad Shahzad Kamal
Muhammad Shahzad Kamal
Rheological models are usually used to predict foamed fluid viscosity; however, obtaining the model constants under various conditions is challenging. Hence, this paper investigated the effect of different variables on foam rheology, such as shear rate, temperature, pressure, surfactant types, gas phase, and salinity, using a high-pressure high-temperature foam rheometer. Power-law, Bingham plastic, and Casson fluid models fit the experimental data well. Therefore, the data were fed to different machine learning techniques to evaluate the rheological model constants with different features. In this study, seven different machine learning techniques have been applied to predict the rheological models’ constants, including decision tree, random forest, XGBoost (XGB), adaptive gradient boosting, gradient boosting, support vector regression, and voting regression. We evaluated the performance of our machine learning models using the coefficient of determination (R2), cross-plots, root-mean-square error, and average absolute percentage error. Based on the prediction outcomes, the XGB model outperformed the other ML models. The XGB model exhibited remarkably low error rates, achieving a prediction accuracy of 95% under ideal conditions. Furthermore, our prediction results demonstrated that the Casson model accurately captured the rheological behavior of the foam. Additionally, we used Pearson's correlation coefficients to assess the significance of various properties in relation to the constants within the rheological models. It is evident that the XGB model makes predictions with nearly all features contributing significantly, while other machine learning techniques rely more heavily on specific features over others. The proposed methodology can minimize the experimental cost of measuring rheological parameters and serves as a quick assessment tool.

27 November 2024 in Gels
Verified
Journal Article
Open access
PDF file
JAJawad Al-Darweesh
Jawad Al-Darweesh
Murtada AljawadMurtada Aljawad
Murtada Aljawad
Muhammad Shahzad KamalMuhammad Shahzad Kamal
Muhammad Shahzad Kamal
Mohamed MahmoudMohamed Mahmoud
Mohamed Mahmoud
SAShabeeb Alajmei
Shabeeb Alajmei
BHBader G. Harbi
Bader G. Harbi
This study investigates the development of a novel CO2-foamed viscoelastic gel-based fracturing fluid to address the challenges of high-temperature formations. The influence of various parameters, including surfactant type and concentration, gas fraction, shear rate, water salinity, temperature, and pressure, on foam viscosity was systematically explored. Rheological experiments were conducted using a high-pressure/high-temperature (HPHT) rheometer at 150 °C and pressures ranging from 6.89 to 20.68 MPa. To simulate field conditions, synthetic high-salinity water was employed. The thermal stability of the CO2 foam was evaluated at a constant shear rate of 100 1/s for 180 min. Additionally, foamability and foam stability were assessed using an HPHT foam analyzer at 100 °C. The results demonstrate that liquid phase chemistry, experimental conditions, and gas fraction significantly impact foam viscosity. Viscoelastic surfactants achieved a peak foam viscosity of 0.183 Pa·s at a shear rate of 100 1/s and a 70% foam quality, surpassing previous records. At lower foam qualities (≤50%), pressure had a negligible effect on foam viscosity, whereas at higher qualities, it increased viscosity by over 30%. While a slight increase in viscosity was observed with foam qualities between 40% and 60%, a significant enhancement was noted at 65% foam quality. The addition of polymers did not improve foam viscosity. The generation of viscous and stable foams is crucial for effective proppant transport and fracture induction. However, maintaining the thermal stability of CO2 foams with minimal additives remains a significant challenge in the industry. This laboratory study provides valuable insights into the development of stable CO2 foams for stimulating high-temperature wells.

6 January 2025 in Arabian Journal for Science and Engineering
Verified
Journal Article
Closed access
PDF file
OBOse Budiman
Ose Budiman
SAShabeeb Alajmei
Shabeeb Alajmei
ABAshtiwi Bahri
Ashtiwi Bahri
Murtada AljawadMurtada Aljawad
Murtada Aljawad
JMJennifer Miskimins
Jennifer Miskimins