Biochar as a stable carbon-rich material shows incredible potential to handle water/wastewater contaminants. Its application is gaining increasing interest due to the availability of feedstock, the simplicity of the preparation methods, and their enhanced physico-chemical properties. The efficacy of biochar to remove organic and inorganic pollutants depends on its surface area, pore size distribution, surface functional groups, and the size of the molecules to be removed, while the physical architecture and surface properties of biochar depend on the nature of feedstock and the preparation method/conditions. For instance, pyrolysis at high temperatures generally produces hydrophobic biochars with higher surface area and micropore volume, allowing it to be more suitable for organic contaminants sorption, whereas biochars produced at low temperatures own smaller pore size, lower surface area, and higher oxygen-containing functional groups and are more suitable to remove inorganic contaminants. In the field of water/wastewater treatment, biochar can have extensive application prospects. Biochar have been widely used as an additive/support media during anaerobic digestion and as filter media for the removal of suspended matter, heavy metals and pathogens. Biochar was also tested for its efficiency as a support-based catalyst for the degradation of dyes and recalcitrant contaminants. The current review discusses on the different methods for biochar production and provides an overview of current applications of biochar in wastewater treatment.

Maximizing the efficient utilization of critical apatite resources through flotation necessitates the exploration of effective and innovative collectors. This study investigates the potential of a fatty acid mixture (FAM) synthesized from saturated palmitic and stearic acids, monounsaturated oleic and palmitoleic acids, and polyunsaturated linoleic acid. The saponified collector FAM and the depressant sodium alginate (NaAl) achieved a direct flotation of apatite from calcite and quartz (97% apatite, 10% calcite, and 7% quartz). The flotation performance with the tested combination exhibited a highly effective enrichment of apatite, mainly from calcite, which aligns with the surface chemistry assessments. Adsorption tests and zeta potential measurements confirmed the micro-flotation results. They provided compelling evidence of a chemisorption interaction between Ca²⁺ sites on calcite and the carboxyl and hydroxyl groups of NaAl. FTIR analyses suggested a reaction between the apatite surface and the carboxyl groups of saturated and unsaturated acid groups in FAM, even those conditioned with NaAl before, facilitating the complex formation. Remarkably, the synergistic effect of the functional groups demonstrates dual functionality, serving as both a hydrophilic entity for calcite and a hydrophobic entity for apatite flotation. The universal mechanism unveils substantial potential for the extensive application of FAM within apatite flotation.

Harmful algal blooms pose a persistent threat to the integrity of freshwater ecosystems and public health. However, there are no selective chemical control agents available to suppress cyanobacterial growth without damaging beneficial phytoplankton. In this study, ten structurally diverse monoterpenes were assessed in vitro for their differential activity against the potent toxin-producing cyanobacterium Microcystis aeruginosa and the ecologically valuable microalga Chlorella sorokiniana using disc diffusion (DDM) and minimum inhibitory concentration (MIC) assays. Inhibition zones against M. aeruginosa ranged from 6.9 to 43.6 mm, with thymol recording the largest zone (43.6 mm). MIC values ranged from 0.25 to >1 mg/mL for both organisms, and selectivity indices identified camphor and carvone as the most cyanobacterium-preferential compounds, while carene and α-pinene showed the inverse selectivity pattern. Molecular docking against six AlphaFold2-predicted target proteins, photosynthetic complexes, Adenosine Triphosphate (ATP) synthase subunits, and superoxide dismutase (SOD) from both organisms, revealed binding affinities between −3.9 and −6.2 kcal/mol. Phenolic monoterpenes consistently engaged active-site glutamate and aspartate residues via hydrogen bonds and Pi–Anion interactions, most strikingly in the M. aeruginosa ATP synthase, whereas the M. aeruginosa SOD represented the least amenable target for all compounds. Computational ADMET profiling confirmed favorable pharmacokinetic properties and low predicted toxicity for the full panel.