This paper focuses on the computational modeling of the effective elastic properties of irregular closed-cell foams. The recent Hill’s lemma periodic computational homogenization approach is used to predict the effective elastic properties. Three-dimensional (3D) rendering is reconstructed with the tomography slices of the real irregular closed-cell foam. Its morphological description is analysed to generate realistic numerical closed-cell structures by the Voronoi-based approach. The influences of the Representative Volume Element (RVE) parameters (i.e., the number of realizations and the volume of RVE) and the relative density on the effective elastic properties are studied. Special emphasis is placed on the appropriate choice of boundary conditions. Satisfying agreements between the homogenized results and the experimental results are observed.

This paper focuses on the light transmittance of macroporous silica as a photocatalyst carrier. In addition to the characteristics of photocatalysts, the structure of porous bulk is also important since it affects the propagation of light. Realistic porous structures are generated by a Voronoi-based approach. Four morphological parameters are highly controlled during generating, that is, porosity, coefficient of variation, diameter ratio and normalized curvature. Finite element method (FEM) is used to simulate the propagation of light in the porous models in the visible light range. The intensity shows a quadratic decrease with the increase of the depth of light propagation. The influences of the morphological parameters on the light transmittance are analysed. It turns out that the porosity has a great influence on the light transmittance while the coefficient of variation and the diameter ratio have small ones. Moreover, the influence of the normalized curvature is little. Besides, the effect of the wavelength of visible light can not be ignored. With the simulation, the depth of visible light entering the porous silica can be estimated, which is challenging to access experimentally.

Oil casings and premium threaded connections play vital roles in the oil and gas extraction industry. The present work establishes an integrated modeling framework for the sealability assessment of premium threaded connections which can be easily implemented and employed by engineers. The framework incorporates a part-scale finite element analysis of the make-up process, a micro-scale simulation of the contact behavior, and a mechanism-informed gap flow model. It is found that complete sealing can be achieved when the contact pressure exceeds 1540 MPa for Gaussian rough surfaces presenting a roughness of 1.6 μm. The seal surface fit is revealed to be critical for sealing performance, as it slightly changes the optimum make-up torque (up to 4%) but significantly changes contact pressure (up to 22%). At an optimum make-up torque, the connection with the loosest seal surface tolerance fit is prone to gas leakage when considering an inlet pressure of 110 MPa. The proposed modeling framework can be extended to other types of threaded connections with metal–metal contact sealing.