Subwavelength hole array (HA) metasurfaces support the so-called extraordinary optical transmission (EOT) resonance that has already been exploited for sensing. In this work, we demonstrate the superior performance of a different resonant regime of HA metasurfaces called anomalous EOT, by doing a thorough numerical and experimental study of its ability in thin-film label-free sensing applications in the terahertz (THz) band. A comprehensive analysis using both the regular and anomalous EOT resonances is done by depositing thin layers of dielectric analyte slabs of different thicknesses on the structures in different scenarios. We carry out a detailed comparison and demonstrate that the best sensing performance is achieved when the structure operates in the anomalous EOT resonance and the analyte is deposited on the non-patterned side of the metasurface, improving by a factor between 2 and 3 the results of the EOT resonance in any of the considered scenarios. This can be explained by the comparatively narrower linewidth of the anomalous EOT resonance. The results presented expand the reach of subwavelength HAs for sensing applications by considering the anomalous EOT regime that is usually overlooked in the literature.

In this work, a terahertz sensor based on a cross dipole frequency selective surface is analyzed and experimentally tested. The sensing structure is optimized for operation at the fundamental band-stop resonance near 0.7 THz and characterized under normal and oblique incidence. The sensing performance as a function of the incidence angle and the wave polarization is evaluated with good agreement between simulations and measurements. It is shown that a figure of merit for the proposed sensor can be enhanced from 0.2 up to 0.6 due to switching from normal to oblique excitation, which yields the maximum performance for TM polarization at the incidence angle of 70°. The presented results demonstrate a wide angle operation regime in THz sensing that opens up an alternative approach in improving capabilities of sensing devices.

In this work, the impact of radiofrequency radiation leakage from microwave ovens and its effect on 802.15.4 ZigBee-compliant wireless sensor networks operating in the 2.4 GHz Industrial Scientific Medical (ISM) band is analyzed. By means of a novel radioplanning approach, based on electromagnetic field simulation of a microwave oven and determination of equivalent radiation sources applied to an in-house developed 3D ray launching algorithm, estimation of the microwave oven’s power leakage is obtained for the complete volume of an indoor scenario. The magnitude and the variable nature of the interference is analyzed and the impact in the radio link quality in operating wireless sensors is estimated and compared with radio channel measurements as well as packet measurements. The measurement results reveal the importance of selecting an adequate 802.15.4 channel, as well as the Wireless Sensor Network deployment strategy within this type of environment, in order to optimize energy consumption and increase the overall network performance. The proposed method enables one to estimate potential interference effects in devices operating within the 2.4 GHz band in the complete scenario, prior to wireless sensor network deployment, which can aid in achieving the most optimal network topology.

A general theory of reciprocal unidirectional transmission with tunable sign-switchable refraction and deflection of outgoing wave in structures with broken spatial inversion symmetry is presented. Several coupling scenarios connected with the diffraction-inspired asymmetry in transmission are considered for volumetric structures with one-side corrugations. They illustrate conditions of coexistence of diodelike unidirectional transmission and tunability of deflection and refraction, including change of their sign. Simulation results are presented and analyzed for nonsymmetric structures based on the stacked subwavelength hole array metamaterial. It is shown that one-way coupling can appear within a wide range of frequencies and angles of incidence, a part of which may be used to obtain different signs of deflection. Transmission results and field distributions confirm the possibility of obtaining high-contrast unidirectional transmission that can be tuned by varying incidence angle, while frequency is fixed. A pronounced unidirectional transmission is demonstrated at negative deflection in structures that are only 0.47${\lambda }_0$ thick, whereas a thicker structure is required in order to obtain both signs of deflection in a unidirectional regime.

A 2-D periodic array of annular apertures (or ring slots) is studied using an accurate circuit model. The model accounts for distributed and dynamic effects associated with the excitation of high-order modes operating above or below cutoff but not far from their cutoff frequencies. This paper allows to ascertain the substantial differences of the underlying physics when this structure operates as a classical frequency selective surface or in the extraordinary-transmission (ET) regime. A discussion of two different designs working at each regime is provided by means of the equivalent circuit approach (ECA), full wave simulation results, and experimental characterization. The agreement between the equivalent circuit calculation applied here and the simulation and experimental results is very good in all the considered cases. This validates the ECA as an efficient minimal-order model and a low computational-cost design tool for frequency selective surfaces and ET-based devices. Additional scenarios such as oblique incidence and parametric studies of the structural geometry are also considered.

The use of metasurfaces operating in the terahertz regime as biosensor devices has attracted increased interest in recent years due to their enhanced sensitivity and more accurate detection capability. Typical designs are based on the replica of relatively simple unit cells, usually called metaatoms. In a previous paper, we proposed a new paradigm for ultrasensitive thin-film sensors based on complex unit cells, called generically metageometries or labyrinth metasurfaces. Here, we extend this concept towards biosensing, evaluating the performance of the labyrinth as a fungi detector. The sensing capabilities are numerically evaluated and a comparison with previous works in this field is performed, showing that metageometries improve the performance compared to metaatoms both in sensitivity and figure of merit, by a factor of more than four. In particular, we find that it is able to detect five fungi elements scattered on the unit cell, equivalent to a concentration of only 0.004/µm².