Structured light – electromagnetic waves with a strong spatial inhomogeneity of amplitude, phase, and polarization – has occupied far-reaching positions in both optical research and applications. Terahertz (THz) waves, due to recent innovations in photonics and nanotechnology, became so robust that it was not only implemented in a wide variety of applications such as communications, spectroscopic analysis, and non-destructive imaging, but also served as a low-cost and easily implementable experimental platform for novel concept illustration. In this work, we show that structured nonparaxial THz light in the form of Airy, Bessel, and Gaussian beams can be generated in a compact way using exclusively silicon diffractive optics prepared by femtosecond laser ablation technology. The accelerating nature of the generated structured light is demonstrated via THz imaging of objects partially obscured by an opaque beam block. Unlike conventional paraxial approaches, when a combination of a lens and a cubic phase (or amplitude) mask creates a nondiffracting Airy beam, we demonstrate simultaneous lensless nonparaxial THz Airy beam generation and its application in imaging system. Images of single objects, imaging with a controllable placed obstacle, and imaging of stacked graphene layers are presented, revealing hence potential of the approach to inspect quality of 2D materials. Structured nonparaxial THz illumination is investigated both theoretically and experimentally with appropriate extensive benchmarks. The structured THz illumination consistently outperforms the conventional one in resolution and contrast, thus opening new frontiers of structured light applications in imaging and inverse scattering problems, as it enables sophisticated estimates of optical properties of the investigated structures.

Bessel terahertz (THz) imaging employing a pair of thin silicon multi-phase diffractive optical elements is demonstrated in continuous wave mode at 0.6 THz. A proposed Bessel zone plate (BZP) design – discrete axicon containing 4 phase quantization levels – based on high-resistivity silicon and produced by laser ablation technology allowed to extend the focal depth up to 20 mm with minimal optical losses and refuse employment of bulky parabolic mirrors in the imaging setup. Compact THz imaging system in transmission geometry reveals a possibility to inspect objects of more than 10 mm thickness with enhanced contrast and increased resolution up to 0.6 of the wavelength by applying deconvolution algorithms.

Fibonacci or bifocal terahertz (THz) imaging is demonstrated experimentally employing a silicon diffractive zone plate in continuous wave mode. Images simultaneously recorded in two different planes are exhibited at 0.6 THz frequency with the spatial resolution of wavelength. Multifocus imaging operation of the Fibonacci lens is compared with a performance of the conventional silicon phase zone plate. Spatial profiles and focal depth features are discussed varying the frequency from 0.3 to 0.6 THz. Good agreement between experimental results and simulation data is revealed.

The flagship monthly journal of SPIE, Optical Engineering (OE) publishes peer-reviewed papers reporting on research and development in all areas of optics, photonics, and imaging science and engineering.

Flexible materials for applications in terahertz (THz) range imaging systems are investigated in this study. THz time-domain spectroscopy and THz imaging at 0.6 THz frequency are used to analyze optical properties of zone plates (TZP) with integrated cross-shaped filters, which are fabricated using direct laser writing on thin graphite, HB pencil-shaded graphite on paper, as well as reference metal-based and pure paper zone plates. Spectral features and focusing power comparable to the best metal-based TZP is achieved with graphite-based TZP. The pure paper and paper with pencil-shaded graphite TZPs showed increase in focusing power by a factor of ∼1.5, supporting numerical 3D finite-difference time-domain simulations. The findings show that graphite-based TZPs can serve as a flexible, compact, and inexpensive optics elements for emerging THz imaging systems.

The art of light engineering unveils a world of possibilities through the meticulous manipulation of photonic properties such as intensity, phase, and polarization. Precision control over these properties finds application in a variety of fields spanning communications, light–matter interactions, laser direct writing, and imaging. Terahertz (THz) range, nestled between microwaves and infrared light, stands out for its remarkable ability to propagate with minimal losses in numerous dielectric materials and compounds, making THz imaging a powerful tool for noninvasive control and inspection. In this study, a rational framework for the design and optimal assembly of nonparaxial THz imaging systems is established. The research is centered on lensless photonic systems composed solely of high‐resistivity silicon‐based nonparaxial elements such as the Fresnel zone plate, the Fibonacci lens, the Bessel axicon, and the Airy zone plate, all fabricated using laser ablation technology. Through a comprehensive examination through illumination engineering and scattered light collection from raster‐scanned samples in a single‐pixel detector scheme, the imaging systems are evaluated via diverse metrics including contrast, resolution, depth of field, and focus. These findings chart an exciting course toward the development of compact and user‐friendly THz imaging systems where sensors and optical elements seamlessly integrate into a single chip.