This paper reports on field-effect-transistor-based terahertz detectors for the operation at discrete frequencies spanning from 0.2 to 4.3 THz. They are implemented using a 150-nm CMOS process technology, employ self-mixing in the n-channels of the transistors and operate well above the transistors' cutoff frequency. The theoretical description of device operation by Dyakonov and Shur is extended in order to describe the device impedance, responsivity, and noise-equivalent power for a novel detection concept, which couples the signal to the drain. This approach enables quasi-static (QS) detection and calibration of the detectors. The different transport regimes (i.e., QS, distributed resistive, and plasmonic mixing) and their transitions are theoretically discussed and experimentally accessed. Responsivity values of 350 V/W at 595 GHz, 30 V/W at 2.9 THz, and 5 V/W at 4.1 THz are reported. At 0.595 THz, we determine the optical noise equivalent power (NEP) to be 42 pW/√Hz ; at 2.9 THz, the value is 487 pW/√Hz. All values are reported for optimum gate bias with respect to NEP at 295 K. For 0.595 THz, theory predicts a NEP value at threshold as low as 2 pW/√Hz for ideal coupling of the radiation.

Experimental proof of localized plasmon resonance was found in thin films containing either single-walled carbon nanotubes (SWNT) or SWNT bundles of different length. All samples were prepared by a simple technique that permitted the selection of different SWNT lengths in different samples without significant differences in electronic properties. Fourier-transform infrared spectroscopy showed that an optical-density peak, the same as a terahertz conductivity peak, shifts to higher frequencies as the SWNT lengths are reduced—in agreement with a similar tendency predicted for the localized plasmon resonance in finite-length SWNTs [Slepyan et al., Phys. Rev. B 81, 205423 (2010)].

The need to reach single-mode lasing and minimize at the same time the electrical dissipation of cryogenically operated terahertz quantum cascade lasers may result in small and subwavelength cavity dimensions. To assess the influence of such dimensions on the shape of the laser emission, we have measured the beam pattern of two metal-metal cavity quantum cascade lasers. The patterns show regular angular intensity variations which depend on the length of the laser cavity. The physical origin of these features is discussed in terms of interference of the coherent radiation emitted by end and side facets of the laser bar.