Haichao Feng

Mr. Haichao Feng


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2019 in Energies
Verified
Journal Article
Open access
PDF file
CGCaixia Gao
Caixia Gao
YNYanjie Nie
Yanjie Nie
JSJiKai Si
JiKai Si
ZFZiyi Fu
Ziyi Fu
HFHaichao Feng
Haichao Feng
This paper proposes a demagnetization fault detection, mode recognition, magnetic pole positioning, and degree evaluation method for permanent magnet synchronous motors. First, the analytical model of the single-coil no-load back electromotive force (EMF) of demagnetization fault for Permanent magnet synchronous motor (PMSM) arbitrary magnetic poles is established. In the analytical model, the single-coil no-load back EMF residual of the health state and the single magnetic pole sequential demagnetization fault are calculated and normalized. Model results are used as the fault sample database. Second, the energy interval database of the single-coil no-load back EMF residual with different numbers of magnetic pole demagnetization is established. Demagnetization fault detection and degree evaluation are performed by the real-time acquired amplitudes of the single-coil no-load back EMF residual. The number of demagnetization poles is determined by comparing the energy of the single-coil no-load back EMF residual with the energy interval database. Demagnetization mode recognition and magnetic pole positioning are realized by analyzing the correlation coefficients between normalized the single-coil no-load back EMF residual and the fault sample database. Finally, results of analysis of the finite element simulation validate the feasibility and effectiveness of the proposed method.

11 August 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HFHaichao Feng
Haichao Feng
XCXu Cui
Xu Cui
JSJiKai Si
JiKai Si
CGCaixia Gao
Caixia Gao
Yihua HuYihua Hu
Yihua Hu
In this work, a novel solid rotor induction motor with toroidal winding (N-TWSRIM) is proposed and its structure and main structural parameters are given. The operating principle is analyzed in accordance with the movement of the armature magnetic field at different times. An equivalent circuit model (ECM) of the N-TWSRIM is established based on composite multilayer theory to analyze and calculate motor performance quickly and accurately. Electromagnetic performance, which includes output torque, stator current, and power factor under different slip, is calculated with ECM, and its results are compared with those of the finite element method. A prototype of the N-TWSRIM is built and experimented on to validate the correctness of the operating principle and ECM. Experimental results on stator current and torque are consistent with the finite element and analytical results.

15 February 2022 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
LALiwang Ai
Liwang Ai
GZGuomin Zhang
Guomin Zhang
XXXiaozhuo Xu
Xiaozhuo Xu
HFHaichao Feng
Haichao Feng
WCWenping Cao
Wenping Cao
This paper studies a superconducting maglev submersible cryogenic liquid pump (CLP) using superconducting magnetic bearing (SMB). A new structure is proposed for the self‐stability of high‐temperature superconducting magnetic levitation, and the compact structure of disk motor‐pump. The rotor of the axial‐flux disk motor is connected with a centrifugal impeller to form an impeller‐rotor of the proposed superconducting CLP. Supported by a SMB system, the impeller‐rotor rotates frictionlessly with self‐stabilisation as a suspension rotor. The SMB system includes a radial‐type SMB, an auxiliary permanent magnet bearing, and an electromagnetic bearing composed of the stator and the rotor of disk motor. Theoretical calculations and experimental measurements are performed to examine the axial and radial levitation force behaviours of the SMB system. Then, a kinetic model of the suspension rotor is established and analysed to assure force balance and stable levitation. Finally, a prototype pump is fabricated and an experimental setup for liquid nitrogen transmission is constructed for validation purposes. The experimental tests on the pump head and the flow rate are carried out, which demonstrate the effectiveness of the proposed superconducting maglev submersible CLP.

20 October 2022 in IET Electric Power Applications
Verified
Journal Article
Open access
HCHao Chen
Hao Chen
NZNan Zhang
Nan Zhang
CGCaixia Gao
Caixia Gao
XXXiaozhuo Xu
Xiaozhuo Xu
HFHaichao Feng
Haichao Feng
Yihua HuYihua Hu
Yihua Hu
This study presents a fault coil localisation approach for a direct‐drive permanent magnet synchronous motor (DDPMSM) with inter‐turn short‐circuit fault (ISF) using the search coil (SC) array. The SCs are wound around specific stator tooth of DDPMSM through the proposed SC array arrangement principle, which reduces the invasiveness of the fault coil localisation method. The SCs are classified as several search coil groups (SCGs), the differential between SC back electromotive forces (EMFs) in the same SCGs ( δ 1 ) and SC residual back EMF ( δ 2 ) are used as fault indicators for ISF localisation. The peak values extracted from δ 1 and δ 2 are the basis for diagnosing ISF. Hence, the proposed approach does not need a complicated signal processing algorithm, and it is less complex. First, the SC back EMF analytical model is developed to investigate the mapping relationship between the back EMF of each SC and fault coil location. Second, fault coil localisation indicators for ISF are analysed based on the proposed analytical model, and the exact ISF localisation approach is presented. Finally, two basic installation units and the arrangement principle of SC array in DDPMSM are proposed. Simulation and experimental results justify the effectiveness of the selected fault indicators and the feasibility of the proposed SC array for diagnosing ISF.

22 February 2022 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
HFHaichao Feng
Haichao Feng
SZSheng Zhang
Sheng Zhang
JWJinsong Wei
Jinsong Wei
XXXiaozhuo Xu
Xiaozhuo Xu
CGCaixia Gao
Caixia Gao
LALiwang Ai
Liwang Ai
The mass production of the motors causes tolerance of shape and dimension, deviation of permanent magnet remanence and rotor eccentricity error, which affect the cogging torque and torque ripple amplitude and performance consistency. In order to reduce the torque ripple of the motor in the actual condition, the robustness optimization is performed in the paper. Firstly, an improving convex arc type permanent magnet structure is adopted to improve air gap flux density and suppress the cogging torque. Secondly, the structure parameters of the magnetic pole are selected as optimization variables, and the magnetization angle, remanence and position of the permanent magnet, static and dynamic rotor eccentricity are considered as noise factors. To improve the overall robustness of the motor under different operating conditions, the dynamic Taguchi method is used to optimize the robustness of the motor, and the test data is processed through the relation analysis method to obtain the optimal combination of control factors. Finally, the prototype is manufactured for the experiment. Compared with the single‐operating conditions robust optimization results, the robust optimization method improves the robustness of the motor. The cogging torque amplitude is reduced by 39.2%. The torque ripple is 38.4% lower than that before optimization.

8 August 2022 in IET Electric Power Applications
Verified
Journal Article
Open access
XXXiaozhuo Xu
Xiaozhuo Xu
WZWei Zhang
Wei Zhang
HFHaichao Feng
Haichao Feng
YZYunji Zhao
Yunji Zhao
LALiwang Ai
Liwang Ai
Permanent magnet linear synchronous motor (PMLSM) is one of the ideal driving sources of ropeless elevators. However, such motors, whether moving magnetic or moving coil, will produce the problem of excessive cost under long travel. The permanent magnet flux switched linear motor (PMFSLM) with permanent magnets (PMs) and copper coils on the mover side greatly reduces the cost. A U‐type PMFSLM is proposed in the paper. First, a PMFSLM is proposed and investigated, quantitatively comparing with PMLSM for the ropeless elevator system. Second, aiming at the problem of flux leakage at the top of PMFSLM, a U‐type PM (UPM) structure is presented. The electromagnetic performance of PMFSLM and UPM‐FSLM have been compared and summarised. The comparison results show that UPM‐FSLM solves the defect of top flux leakage, increases thrust by 4.34%, reduces thrust ripple by 28.10%, and has better electromagnetic performance than PMFSLM. Afterwards, the elevator passenger capacity of PMFSLM and UPM‐FSLM are simulated and calculated and the feasibility is analysed. Finally, a prototype of PMFSLM has been built and measured.