Suspended two-dimensional (2D) materials in high-performance devices exhibit unique properties that are critically important for nanoscale mechanical and electromechanical applications, while their frictional laws remain poorly understood. Here, we investigate the nanoscale frictional behavior of suspended WS2 flakes under varying applied loads and scanning rates using atomic force microscopy (AFM), and successfully employ the Bowden–Tabor theory and the thermally activated Prandtl–Tomlinson (PTT) model to analyze the load- and scanning-rate-dependent friction characteristics of suspended 2D systems. The results show that suspended WS2 exhibits higher friction than supported WS2, whereas its friction increases more slowly with applied load, which can be well described by the Bowden–Tabor theory. Moreover, the friction exhibits a logarithmic dependence on scanning rate for both suspended and supported WS2. Quantitative analysis within the framework of the PTT model demonstrates that this model can be successfully extended to describe the rate-dependent friction of suspended WS2, providing a unified framework for both supported interfaces and suspended 2D systems. This work provides valuable guidance for understanding frictional dissipation mechanisms relevant to the design and optimization of WS2-based devices.
High-dimensional (HD) quantum systems are capable of processing more complex information and performing a wider array of quantum operations, in contrast to low-dimensional (LD) quantum systems, thereby improving the speed and fault tolerance of quantum computing. In the study, we propose a deterministic qudit-encoded $4\times 4\times 4$ -dimensional (64D) controlled-controlled-SUM (CCSUM) gate based on weak Kerr effect. The 64D CCSUM gate leverages the polarization and spatial degrees of freedom (DoFs) of three photons to encode 4D control and target qudits, thereby optimizing quantum resources and reducing costs. Moreover, the HD CCSUM gate functionality is implemented in a deterministic way by employing the X-Homodyne detector to measure coherent states, combined with related classical feed-forward operations. Through detailed analyses, the proposed HD CCSUM gate, under current technological conditions, exhibits robust fidelity and feasibility, offering a promising path toward the realization of HD quantum computing.
Diamond nitrogen-vacancy (NV) centers are regarded as promising microwave sensors owing to their excellent magnetic sensitivity, stability, and environmental compatibility. However, traditional confocal test platforms based on diamond NV centers are bulky, which limits their practical applications. In this paper, a fiber-coupled compact NV microwave magnetometer is designed that employs the continuous heterodyne measurement method and a fast Fourier transform to measure multiple microwave fields. We integrated the laser excitation module, microwave antenna module, and fluorescence collection module into a single unit, reducing the volume of the magnetometer to 13 cubic centimeters. By adjusting the frequency and power of the measured microwave signals, the applicability of the device under different frequency and power conditions was verified. Experimental tests show that the microwave magnetometer can simultaneously detect multiple microwave fields with different frequencies and power levels, achieving a frequency resolution on the order of millihertz (mHz) and a microwave detection sensitivity of 0.385 nT/Hz1/2. These results demonstrate the magnetometer’s multi-microwave-field measurement capability, making it highly promising for applications such as microwave anomaly localization and medical diagnosis.
Addressing the challenges of electromagnetic compatibility testing and non-destructive inspection of internal structures in miniaturized electronic devices. This paper reports a non-destructive testing method based on wide-field imaging using diamond nitrogen-vacancy (NV) centers, and systematically demonstrates its application on a black-epoxy-encapsulated Universal Serial Bus (USB) flash drive. In the experiment, a swept microwave signal from 2.82 GHz to 2.97 GHz was sequentially injected into the four external interface pins of the USB drive. A bulk diamond served as the quantum sensing layer, and optically detected magnetic resonance (ODMR) was employed to perform wide-field imaging of the microwave field distribution on the surface of the signal lines within a 1 × 1 mm2 region of interest. The experimental results show that the microwave field distributions corresponding to different interface channels are significantly different. Based on these differences, the connection relationship between each signal line and its corresponding interface pin can be clearly identified, and the differences in field distribution as well as crosstalk characteristics among channels can be revealed. The method established in this work provides an effective technical pathway for non-destructive electromagnetic testing and functional verification of electronic products.