Recently, a new empty coaxial structure, entirely built with printed circuit boards, has been proposed. The resulting coaxial line has low radiation, low losses, high-quality factor, and is nondispersive. Up to now, this coaxial line has not been completely integrated in a planar substrate, since a working transition to a traditional planar line has not been defined yet. Therefore, in this paper, a high-quality transition from coplanar waveguide to this new empty coaxial line is proposed. With this transition, the coaxial line is completely integrated in a planar circuit board, so that it truly becomes an empty substrate-integrated coaxial line. The proposed transition has been fabricated. Both full-wave simulated and measured results show an excellent agreement. Therefore, the proposed transition is suitable to develop completely substrate-integrated components for applications in wideband communication systems that require very high quality responses and protection from external interferences. To show this fact, this new transition has been applied to integrate a high-performance empty coaxial filter in a planar substrate. The measured response of this filter is excellent, and proves the goodness of the proposed transition that has enabled, for the first time, the complete integration of an empty coaxial line in a planar substrate.

This letter presents an omnidirectional horizontally polarized planar printed loop-antenna using left-handed CL loading with 50-Omega input impedance. The antenna has a one wavelength circumference and gives an omnidirectional pattern in the plane of the loop, whilst working in an n = 0 mode. In contrast, a conventional right-handed loop, with the same dimensions, has a figure of eight pattern in the plane of the loop. The antenna is compared with other right-handed periodically loading loop antennas and shown to have the best efficiency and is much easier to match. Design details and simulated results are presented. The concept significantly extends the design degrees of freedom for loop antennas.

In this paper, a general overview regarding neural recording, classical signal processing techniques and machine learning classification algorithms applied to monitor brain activity is presented. Currently, several approaches classified as electrical, magnetic, neuroimaging recordings and brain stimulations are available to obtain neural activity of the human brain. Among them, non-invasive methods like electroencephalography (EEG) are commonly employed, as they can provide a high degree of temporal resolution (on the order of milliseconds) and acceptable space resolution. In addition, it is simple, quick, and does not create any physical harm or stress to patients. Concerning signal processing, once the neural signals are acquired, different procedures can be applied for feature extraction. In particular, brain signals are normally processed in time, frequency, and/or space domains. The features extracted are then used for signal classification depending on its characteristics such us the mean, variance or band power. The role of machine learning in this regard has become of key importance during the last years due to its high capacity to analyze complex amounts of data. The algorithms employed are generally classified in supervised, unsupervised and reinforcement techniques. A deep review of the most used machine learning algorithms and the advantages/drawbacks of most used methods is presented. Finally, a study of these procedures utilized in a very specific and novel research field of electroencephalography, i.e., autobiographical memory deficits in schizophrenia, is outlined.

This article presents the first substrate integrated waveguide (SIW) phase shifter that can be reconfigured using liquid metal (LM). This digital phase shifter exhibits low insertion loss and is reciprocal and bidirectional. It incorporates a series of holes which can be filled or emptied of liquid metal, enabling us to add or remove via connections dynamically, on-the-fly. Using a collection of such holes, it is possible to create a wall along the E-plane or H-plane of the waveguide. When the wall is in place, it blocks the passage of energy. When the wall is absent, energy is able to flow. In this way, it is possible to guide the electromagnetic (EM) waves through one of three paths, having different electrical lengths. The result is a digital switched-line phase shifter that achieves coarse steps of phase change, from 0° up to 180°, in steps of 60°. By filling or emptying individual holes, it is possible to introduce reactive loading into each path. In this way, it is possible to achieve fine phase control in steps of 10°. Using both forms of reconfiguration in unison, the proposed phase shifter is able to deliver a phase shift of up to 180°, in steps of 10°. The proposed phase shifter operates at 10 GHz and exhibits an insertion loss of less than 2.3 dB over its entire operating band. Furthermore, the underlying concept of the proposed phase shifter can be readily scaled for operation in the millimeter-wave (mm-wave) band. The existing phase shifters operating in that band exhibit significant insertion losses. MM-wave phase shifters are expected to find application in 5G mobile access points.

Substrate-integrated circuits (SICs) [1] have attracted much attention in the last several years because of their great potential. The first implementation of the concept can be found in [2] as a feeding mechanism for a slot array antenna. Deslandes and Wu [3], [4] used the term substrate-integrated waveguide (SIW) to define this waveguide integrated in a substrate where the lateral walls are synthesized with metallized via holes, and the upper and lower walls are the top and bottom metallization of the substrate.

This letter presents a passive UHF printed loop antenna with left-handed loading. The RFID reader antenna can work at near- and far-field operation within the European UHF (865-868 MHz) band. The operation frequency and radiation properties can be modified by employing varactor diodes. Also, the antenna can work in the near-field region having a flat magnetic distribution in the interrogation zone. A comparative study with other passive RFID reader conventional antennas shows that the left-handed loop achieves stronger near H-field with good impedance matching. Design details, simulated results, and a fabricated prototype are presented. The concept significantly extends the design degrees of freedom for RFID antennas.