The diffusion processes during the contact melting at the boundary of explosively welded VT1-0 titanium with CuNi19 (melchior) and CuNi45 (constantan) alloy composites were studied. Heat treatment of composites led to the formation of the interaction zone at the joint boundary. The interaction zone in VT1-0 + CuNi19 consists of TiCuNi and αTi + Ti2Cu(Ni) continuous layers as well as a mixture of TiNi(Cu) + TiCu(Ni) + Ti2Cu(Ni) intermetallics. It has been shown that an increase in the nickel content in the case of VT1-0 + CuNi45 composite leads to a decrease in the temperature of contact melting, a change in its mechanism, an increase in the titanium content in the interaction zone, and the appearance of additional Ti2Ni(Cu) intermetallic in its composition.
—In a metallurgical method of producing metal matrix composites, the effect of ultrasound on a melt is shown not to affect the phase composition of the diffusion zone formed as a result of heterogeneous reactions at the interface of aluminum with iron-based alloys. At a fixed temperature, an applied acoustic vibration frequency of 18–20 kHz, and an amplitude of 10–15 μm, the diffusion zone thickness is found to increase due to the formation of the FeAl3 intermetallic compound, which actively separates from the interface into the melt, and to the fraction of the surface on which it is present as a continuous layer.