Mingliang Li

Dr. Mingliang Li


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2025 in Chinese Journal of Rock Mechanics and Engineering
Verified
Journal Article
Open access
PDF file
Mingliang LiMingliang Li
Mingliang Li
QQQingci Qin
Qingci Qin
KLKegang Li
Kegang Li
SWSu Wu
Su Wu
To investigate the characteristics of rockburst failure and the intensity levels of rockbursts in deep-buried roadways with straight walls and structural planes, a true-triaxial test was conducted on cubic limestone samples extracted from indoor arched roadways featuring straight walls and structural planes. The failure of the rock mass was monitored in real-time using a miniature camera and acoustic emission techniques. The stress coefficient for the rock mass was defined using Fish language and subsequently imported into FLAC3D numerical simulation software to predict the rockburst intensity levels of roadways with concealed straight structural planes. The research findings indicate that the straight-wall arch-shaped specimen without exposed straight structural planes experiences rockburst failure, whereas the specimen with exposed straight structural planes undergoes rock slab cracking failure. Furthermore, the extent of damage and the depth of the “V” groove failure zone in the former specimen is greater than that in the latter. The cumulative ringing count and absolute energy of acoustic emissions from the unexposed flat structure test sample exceed those of the exposed straight structure test sample. Notably, the proportion of shear failure in the unexposed straight structure test sample during the entire loading process is significantly lower compared to that of the exposed straight structure sample. The presence of undisclosed straight structural planes leads to variations in the rockburst intensity levels across different sections of the roadway. Specifically, the rockburst intensity level of the side walls containing undisclosed straight structural planes has increased from level 1 to level 2. These research results offer new insights for the prevention and control of rockbursts in underground caverns subjected to high stress and dynamic disturbances.

5 December 2025 in Processes
Verified
Journal Article
Open access
PDF file
WLWeijun Liu
Weijun Liu
KLKegang Li
Kegang Li
Mingliang LiMingliang Li
Mingliang Li
GZGuojian Zeng
Guojian Zeng
FLfengxian li
fengxian li
JEJürgen Eckert
Jürgen Eckert
The support methods in downward approach mining drift have always suffered from problems of inflexible operation, with high substantial costs and poor supporting efficiency under high ground stress and repeated engineering disturbances. In this work, a novel flexible mesh support schematic was designed and introduced in downward approach mining drift. Based on extensive field investigations and sampling experiments conducted within the mining region, material models and contact models for defining the complex hidden joint structure in a metal mine were established and developed to simulate the stress distributions of the designed flexible mesh support. The deformation and failure behavior of the flexible mesh support under the effect of high ground stress were investigated and its feasibility was evaluated. The results show that the flexible mesh support system exhibits a distinct control effect on the deformation of perimeter rock. The perimeter rock deformation decreases by nearly 46.0% after the flexible mesh support, and the maximum horizontal displacement is 60 mm. An optimized flexible mesh support scheme for downward approach mining drift was obtained and confirmed by industrial tests. This work provides a flexible mesh support technology for downward approach mining drift, which can not only enhance the safety of downward approach mining drift operations, but also significantly improve construction efficiency.

2 February 2026 in Eng
Verified
Journal Article
Open access
PDF file
TZTianlong Zhou
Tianlong Zhou
KLKegang Li
Kegang Li
JLJiawen Liu
Jiawen Liu
JMJian Meng
Jian Meng
Mingliang LiMingliang Li
Mingliang Li
DTDong Tian
Dong Tian
Instability in dump slopes frequently induces landslides, a process governed by complex factors. To investigate the impact of gradation composition on dump slope stability, four distinct gradations were designed, and large-scale laboratory triaxial tests were conducted to characterize their strength and deformation behaviors under varying confining pressures. Concurrently, numerical models of dump slopes with these four gradations were established using Particle Flow Code (PFC) to simulate rainfall infiltration processes. Through a comparative analysis of particle contact force chains, pore water pressure evolution, particle displacement under varying rainfall durations, and safety factors under natural and rainfall conditions, the mechanisms governing the influence of gradation composition on slope stability were elucidated from both macroscopic and microscopic perspectives. Results indicate the following: (1) Gradation composition significantly affects the strength and deformation characteristics of dump materials. Sample group 3 (with a fine-to-coarse particle ratio of 4:6) exhibited the highest strength among the four test samples, with peak deviatoric stresses of 610 kPa, 1075 kPa, and 1539 kPa under confining pressures of 200 kPa, 400 kPa, and 600 kPa, respectively. Its corresponding shear strength parameters were a cohesion of 38.45 kPa and an internal friction angle of 32.55°. In contrast, sample group 4 (fine-to-coarse ratio of 6:4) showed the lowest strength, with peak deviatoric stresses of 489 kPa, 840 kPa, and 1290 kPa under the same confining pressures, and shear strength parameters of c = 25.35 kPa and φ = 30.02°. (2) Gradation modulates contact forces and failure modes via a “skeleton-filling” mechanism. (3) Gradation plays a critical role in controlling pore water pressure evolution and the seepage characteristics of the dump slope model. Among the four designed gradations and their corresponding numerical models, Model 3 was characterized by the highest contact forces and the lowest pore water pressure. It exhibited the highest stability under both natural and rainfall conditions, with safety factors of 1.70 and 1.22, respectively. Conversely, Model 4 showed weak particle contact forces and high pore pressure, demonstrating the poorest stability. It yielded safety factors of only 1.25 and 1.02 under natural and rainfall-saturated conditions, indicating that it represents the least favorable gradation composition. These findings provide valuable references for the optimization of dumping processes and stability control in similar engineering projects.

16 October 2026 in Geosciences
Verified
Journal Article
Open access
PDF file
QLQuanrui Liu
Quanrui Liu
KLKegang Li
Kegang Li
Mingliang LiMingliang Li
Mingliang Li
ZQZhiqiang Qiao
Zhiqiang Qiao
Xiaofei LIUXiaofei LIU
Xiaofei LIU
To investigate the influence of joint spatial orientation on the rockburst mechanism of deep roadways, this study employs a true triaxial rockburst testing system to conduct physical simulation experiments on three types of limestone specimens from Yunnan: joint-free, parallel-jointed, and vertical-jointed. By integrating multi-source data acquisition techniques including high-speed imaging, acoustic emission (AE) monitoring, and fragments sieving, this research systematically analyzes the macroscopic failure process of rockburst, the evolutionary patterns of AE signals, and the characteristics of fragment generation under different fracture configurations. Joint orientation critically governs the rockburst failure mode, with parallel joints promoting extensive spalling and vertical joints localizing damage. Parallel joints act as guiding weak planes, resulting in a wider and more intense failure range, while vertical joints cause localized failure. The characteristics of acoustic emission signals reveal the regulatory mechanism of joints on the AE energy accumulation and release process. The parallel-jointed specimens exhibit a “step-like” increase, reflecting their phased damage and stress redistribution. Quantitative analysis of fragments indicates that the total mass of fragments in the parallel joint specimens is the largest, and the fractal dimension is the highest, indicating the most thorough fragmentation. This research provides crucial experimental evidence for the precise identification and differentiated prevention and control of rockburst risks in deep jointed rock mass engineering. It should be noted that these findings are derived from exploratory laboratory comparisons based on one specimen for each joint configuration, and further repeated tests are required to verify the generalizability of the observed patterns.

1 January 2025 in Geofluids
Verified
Journal Article
Open access
QPQingtao Peng
Qingtao Peng
KLKegang Li
Kegang Li
JSJi Shi
Ji Shi
NANaeem Abbas
Naeem Abbas
Mingliang LiMingliang Li
Mingliang Li
To investigate the creep behavior of deep‐buried hard rocks under various initial damage conditions, standard dolomite specimens were subjected to conventional triaxial compression and creep tests under a confining pressure of 30 MPa. The study analyzed the axial creep characteristics, total creep duration, deformation modulus, and failure modes of dolomite with different initial damage levels. Subsequently, a novel nonlinear creep constitutive model for hard rocks that incorporates initial damage was developed. The findings are as follows: (1) Under incremental loading, the axial strain of dolomite with varying initial damage exhibited a stepwise increase. The axial instantaneous strain increased nearly linearly with stress levels, and this strain intensified with greater damage at equivalent stress levels. (2) Dolomites with varying degrees of damage all experienced four distinct phases: instantaneous deformation, decelerating creep, steady‐state creep, and accelerating creep. Increased damage corresponded to shorter total creep durations and reduced deformation moduli. At a loading stress of 80%, the total creep duration and deformation modulus of the damaged specimens decreased by 50.39% and 24.18%, respectively. (3) The creep failure mode of dolomite shifted from a predominant shear failure to a more complex combination of shear and tensile failure as damage increased. (4) This model accurately captures the three characteristic creep stages and the influence of initial damage on creep failure stress, offering a fresh perspective for the study of triaxial creep mechanical properties of dolomite with different initial damage levels under high‐stress conditions.