The design phase of ground source heat pump systems is an extremely important one as many of the decisions made at that time can affect the system’s energy performance as well as installation and operating costs. The current study examined the interpretation of thermal response testing measurements used to evaluate the equivalent ground thermal conductivity and thus to design the system. All the measurements were taken at the same geological site located in Molinella, Bologna (Italy) where a variety of borehole heat exchangers (BHEs) had been installed and investigated within the project Cheap-GSHPs (Cheap and efficient application of reliable Ground Source Heat exchangers and Pumps) of the European Union’s Horizon 2020 research and innovation program. The measurements were initially analyzed in accordance with the common interpretation based on the first-order approximation of the solution for the infinite line source model and then by utilizing the complete solutions of both the infinite line and cylinder source models. An inverse numerical approach based on a detailed model that considers the current geometry of the BHE and the axial heat transfer as well as the effect of weather on the ground surface was also used. Study findings revealed that the best result was generally obtained using the inverse numerical interpretation.

In this study, the thermal behavior of the coaxial and double U borehole heat exchangers was investigated using numerical simulations in both the long- and short-term. As a reference for borehole heat exchanger specifications, the existing coaxial and double U probes of a geothermal heat pump installed within the Horizon 2020 research project named “Cheap GSHPs” were considered. Nine years of simulations revealed that when borehole heat exchangers are subjected to a balanced thermal load, and intermittent operating modes of the ground source heat pump system are set, the coaxial pipes’ configuration provides better thermal performance due to the higher thermal capacitance of the heat-carrier fluid and the lower borehole thermal resistance. The analysis was conducted considering two different types of ground with different thermal conductivity values. As result, the more conductive ground type highlights the higher yield of the coaxial probe.

Global decarbonization represents one of the defining challenges of the 21st century. Geothermal energy offers a robust alternative for reducing fossil fuel dependency for both residential and industrial heating and cooling. While shallow geothermal systems are versatile and high-performing, comprehensive Life Cycle Assessments (LCA) remain scarce in the literature. This study evaluates the environmental impact of the manufacturing and installation processes of next-generation coaxial probes featuring a galvanized steel outer tube and an internal polyethylene pipe. The LCA identifies material composition as the primary environmental driver: steel production accounts for 41% of the total impact, while the hot-dip galvanization process contributes 30%, significantly affecting the “climate change” and the “resource use” categories. A comparative LCA with conventional double U-tube installations shows similar overall environmental impacts. A sensitivity analysis on the coaxial probes was conducted to explore potential mitigation strategies aimed at reducing the associated environmental impacts, providing indications for sustainable eco-design. The LCA results demonstrate that optimizing the design, specifically by reducing the steel quantity in the coaxial outer tube and avoiding the zinc coating process, results in a 34% reduction in total environmental impact, confirming that LCA is a fundamental tool for supporting the environmental sustainability of developing technologies.