Zhannur Myltykbayeva

Dr. Zhannur Myltykbayeva


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZMZhannur Myltykbayeva
Zhannur Myltykbayeva
ASAnar Seisembekova
Anar Seisembekova
BMBeatriz M. Moreno
Beatriz M. Moreno
RTRita Sánchez Tovar
Rita Sánchez Tovar
RDRamón M. Fernández Domene
Ramón M. Fernández Domene
JNJosé M. López Nieto
José M. López Nieto
Metalloporphyrin-containing mesoporous materials, named VTPP@SBA, were prepared via a simple anchoring of vanadyl porphyrin (5,10,15,20-Tetraphenyl-21H,23H-porphine vanadium(IV) oxide) through a SBA-15-type mesoporous material. For comparison, vanadyl porphyrin was also impregnated on SiO2 (VTPP/SiO2). The characterization results of catalysts by XRD, FTIR, DR-UV-vis, and EPR confirm the incorporation of vanadyl porphyrin within the mesoporous SBA-15. These catalysts have also been studied using electrochemical and photoelectrochemical methods. Impedance measurements confirmed that supporting the porphyrin in silica improved the electrical conductivity of samples. In fact, when using mesoporous silica, current densities associated with oxidation/reduction processes appreciably increased, implying an enhancement in charge transfer processes and, therefore, in electrochemical performance. All samples presented n-type semiconductivity and provided an interesting photoelectrocatalytic response upon illumination, especially silica-supported porphyrins. This is the first time that V-porphyrin-derived materials have been tested for photoelectrochemical applications, showing good potential for this use.

19 September 2025 in Chemengineering
Verified
Journal Article
Open access
PDF file
AKArdak Karagulanova
Ardak Karagulanova
BÇBurcu Nilgün Çetiner
Burcu Nilgün Çetiner
KKKaster Kamunur
Kaster Kamunur
LMLyazzat Mussapirova
Lyazzat Mussapirova
ABAisulu Batkal
Aisulu Batkal
RNRashid Nadirov
Rashid Nadirov
Coal ash is a promising secondary resource for rare earth element (REE) recovery, yet efficient processing under environmentally benign conditions remains challenging. This study demonstrates that tartaric acid, when combined with MgSO4 as a salt additive, enables effective extraction of light REEs (La, Ce, Nd). REE recoveries improved from ~40% without salt to nearly 65% under optimized conditions. Kinetic modeling indicated a surface-reaction–controlled mechanism with activation energies of 20–22 kJ/mol, consistent with SEM evidence of particle erosion and size reduction. These findings highlight the potential of organic-salt leaching systems as alternatives to mineral acid processes, offering both effective REE recovery and reduced environmental impact.

10 October 2025 in Chemengineering
Verified
Journal Article
Open access
PDF file
YIYerzhan Imanbayev
Yerzhan Imanbayev
YOYerdos Ongarbayev
Yerdos Ongarbayev
AAAkerke Abylaikhan
Akerke Abylaikhan
Binur MussabayevaBinur Mussabayeva
Binur Mussabayeva
DMDinara Muktaly
Dinara Muktaly
ZMZhannur Myltykbayeva
Zhannur Myltykbayeva
This paper discusses the efficiency of ultrasonic-assisted bitumen extraction from bituminous sands of the Beke deposit (Mangistau region, Kazakhstan) using alkaline aqueous solutions. The process parameters, including ultrasonic frequency (22 kHz), power (up to 1500 W), solution pH (>12), and optimal NaOH concentration (1 wt.%) were optimized to achieve a maximum bitumen recovery of 98 wt.% within 8 min. The most effective sand-to-solution mass ratio was determined as 1:2, while the optimal process temperature was 75 °C. The application of ultrasound significantly enhances cavitation and reagent penetration, enabling efficient separation of bitumen with minimal chemical usage. Fourier-transform infrared (FTIR) spectroscopy and GC–MS analyses revealed the presence of aromatic hydrocarbons, paraffinic and naphthenic structures, as well as sulfur- and oxygen-containing functional groups (e.g., sulfoxides, carboxylic acids). These characteristics suggest moderate maturity and a high degree of aromaticity of the organic matter. Despite suitable thermal and compositional properties, the extracted bitumen exhibits a relatively low stiffness and softening point, indicating the need for additional upgrading (e.g., oxidation) prior to use in road construction. Although standard rheological tests (e.g., dynamic shear rhinometry) were not conducted in this study, the penetration and softening point values suggest a relatively soft binder, possibly unsuitable for high-temperature paving applications without modification. Future research will focus on rheological evaluation and oxidative upgrading to meet the ST RK 1373-2013 specification requirements.

24 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
YIYerzhan Imanbayev
Yerzhan Imanbayev
YOYerdos Ongarbayev
Yerdos Ongarbayev
AZAinur Zhambolova
Ainur Zhambolova
EKErnar Kanzharkan
Ernar Kanzharkan
AKAliya Kenzhegaliyeva
Aliya Kenzhegaliyeva
AAAnar Akkenzheyeva
Anar Akkenzheyeva
Asphalt concrete pavements in many regions suffer from premature deterioration caused by low-temperature cracking and rutting resistance under heavy traffic loads and high summer temperatures. While polymer-modified bitumen is widely used to improve pavement performance, the high cost of commercial polymers restricts its extensive application. This study evaluates the potential of polymer waste as an alternative modifier for asphalt binders to enhance mechanical performance while reducing economic and environmental costs. Experimental results demonstrate that an optimal plastic waste content of 1.0–1.5% significantly improves rutting resistance and increases binder rigidity. The incorporation of 1.5% low-density polyethylene (LDPE) and high-density polyethylene (HDPE) enhances deformation resistance, elastic modulus, and temperature stability. LDPE exhibits better compatibility with bitumen and dissolves more readily, contributing to improved binder homogeneity, whereas HDPE provides higher stiffness and thermal stability. The combined use of polymer waste with styrene–butadiene–styrene (SBS) produces a pronounced synergistic effect, leading to improvements in physical and mechanical properties exceeding 25% compared to Kazakhstan regulatory standards. Increasing polymer waste content further enhances the rigidity of both the binder and asphalt concrete, thereby improving rutting resistance and plastic deformation at elevated temperatures. The proposed approach offers a cost-effective and sustainable solution for road construction, promoting plastic waste recycling, reducing reliance on virgin polymers, and improving pavement durability, particularly under the climatic and traffic conditions of Kazakhstan.

16 July 2026 in Catalysts
Verified
Journal Article
Open access
PDF file
ZMZhannur Myltykbayeva
Zhannur Myltykbayeva
ASAnar Seisembekova
Anar Seisembekova
İKİmge Kalkan
İmge Kalkan
AAAkerke Abylaikhan
Akerke Abylaikhan
LMLaura Myltykbayeva
Laura Myltykbayeva
AKATIF KOCA
ATIF KOCA
This review is devoted to the occurrence, extraction, structural characterization and catalytic applications of vanadyl porphyrins present in heavy crude oils and petroleum residues. Vanadyl porphyrins represent the major vanadium-containing compounds in petroleum systems and play a dual role as both catalyst poisons during refining processes and valuable precursors for functional catalytic materials. Particular attention is devoted to recent advances in extraction technologies, including solvent extraction, ionic liquids, deep eutectic solvents, functionalized adsorbents and chelating agents. Process intensification approaches such as ultrasound- and microwave-assisted extraction, are also discussed as promising strategies for improving extraction efficiency and selectivity. Furthermore, recent developments in petroleum characterization using FTICR-MS, EPR, HYSCORE and LA-ICP-MS techniques are reviewed, providing insights into metalloporphyrin speciation, oxidation states, and distribution within complex petroleum matrices. Beyond their traditional role in catalyst deactivation, vanadyl porphyrins have emerged as attractive precursors for catalytic materials applied in oxidation reactions, photocatalysis, oxidative desulfurization, wastewater treatment and selective organic synthesis. The development of hybrid catalytic systems based on mesoporous silica, graphene oxide, carbon nanotubes, polymer matrices, and metal–organic frameworks has significantly improved catalyst stability, activity and recyclability. Current challenges related to the selective extraction, preservation of metalloporphyrin structure and catalytic performance evaluation are also discussed. Overall, this review provides an integrated perspective on the recovery, characterization and valorization of vanadyl porphyrins for sustainable petroleum upgrading and environmental applications.