H. H. Draz

Dr. H. H. Draz

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2023 in Circuits, Systems, and Signal Processing
Verified
Journal Article
Open access
PDF file
HDH. H. Draz
H. H. Draz
NEN. E. Elashker
N. E. Elashker
MMMervat Mahmoud
Mervat Mahmoud
Image processing algorithms are essential for clarifying the image and improving the ability to recognize distinct characteristics of the image. The field of digital image processing is widespread in several research and technology applications. In many of these applications, the existence of impulsive noise in the obtained images is one of the most frequent problems. The median filter is a strong method to remove the impulsive noise; it effectively eliminates salt and pepper noise from the image. The main target of this paper is to investigate efficient median filter units to be connected to a general-purpose processor (GPP) for FPGA-based embedded systems. The paper exposes three novel techniques, two of them specially for median filtering techniques and the third one is used to get the maximum number of any 9 elements array. The proposed algorithms are inspired by the Median Of Median (MOM) algorithm. The first two techniques are tested for filtering $$3 \times 3$$3×3 image windows and optimized for producing the expected result in high accuracy, short time, and reduced number of comparisons. The last technique is tested for a 9 elements array for extracting the maximum number in same high efficiency manner. Furthermore, the three proposed techniques are implemented leveraging the advantage of the parallel processing and the FPGA flexible resources to satisfy the real-time processing constraints. A comparison between the first two proposed filtering units and their counterparts in the literature is included. The comparison reveals the superiority of the first technique in terms of accuracy with fewer comparators than previously published techniques. Besides, the paper illustrates how the concept beyond the proposed techniques can be used to perform the maximum pooling for convolution neural networks.

31 May 2025 in The Journal of Supercomputing
Verified
Journal Article
Open access
PDF file
RSRatshih Sayed
Ratshih Sayed
HDH. H. Draz
H. H. Draz
HAHaytham Azmi
Haytham Azmi
Convolutional Neural Networks (CNNs) proved highly successful in various applications, including image classification. CNNs demand a massive number of mathematical operations that represent a challenge in hardware implementation, especially for limited-resource devices or edge-computing devices. This paper presents Binary Weight CNN (BW-CNN) accelerator that can be deployed on Field Programmable Gate Array (FPGA). The BW-CNN provides efficient hardware optimization, by using 1-bit representation for weights and 2-bit representation for activations to minimize the model size and reduce the number of required multiplications. Moreover, binary weights enable the system to avoid memory access time bottleneck for reading the weights because they are saved on-chip. The BW-CNN supports hardware/software co-design approach for hardware acceleration. The proposed BW-CNN is implemented using Virtex UltraScale FPGA VCU108 Evaluation Kit. The BW-CNN is evaluated on the Modified National Institute of Standards and Technology (MNIST) dataset achieving 98.45% accuracy and consumes power of 3.599 W.

18 September 2018 in BioMedical Engineering OnLine
Verified
Journal Article
Open access
PDF file
HDH. H. Draz
H. H. Draz
SGS. R. I. Gabran
S. R. I. Gabran
MBMohamed Basha
Mohamed Basha
Hassan MostafaHassan Mostafa
Hassan Mostafa
MAMohamed F. Abu-Elyazeed
Mohamed F. Abu-Elyazeed
AZAmal Zaki
Amal Zaki
The new field of neuro-prosthetics focuses on the design and implementation of neural prostheses to restore some of the lost neural functions. The electrode-tissue contacts remain one of the major obstacles of neural prostheses microstructure. Recently, Microelectrode fabrication techniques have been developed to have a long-term and stable interface with the brain. In this paper, a comparative analysis of finite element models (FEM) for several electrode layouts is conducted. FEM involves parametric and sensitivity analysis to show the effects of the different design parameters on the electrode mechanical performance. These parameters include electrode dimensions, geometry, and materials. The electrodes mechanical performance is evaluated with various analysis techniques including: linear buckling analysis, stationary analysis with axial and shear loading, and failure analysis for brittle and ductile materials. Finally, a novel figure of merit (FOM) is presented and dedicated to the various electrodes prototypes. The proposed designs take into account mechanical performance, fabrication cost, and cross sectional area of the electrode. The FOM provides important design insights to help the electrodes designers to select the best electrode design parameters that meet their design constraints.

1 May 2014
Verified
Conference Paper
Closed access
SAS.H. Amer
S.H. Amer
AEA.S. Emara
A.S. Emara
RER. Mohie El-Din
R. Mohie El-Din
MFM.M. Fouad
M.M. Fouad
Ahmed H. MadianAhmed H. Madian
Ahmed H. Madian
HDH. H. Draz
H. H. Draz
This paper focuses on the production testing of current mode logic gates using the 45nm technology. Two-input elementary gates are studied assuming five faults per transistor. It is shown that two different implementations of the same logic function might result in different minimum test sets depending on the transistor level architecture. In addition, in MCML gates, it is observed that the detection of faults in the upper PMOS load transistors is time dependent and that the test vectors that detect faults in the logic network also detect faults in the load transistors as well as the tail NMOS transistor.

19 March 2023 in ACM Transactions on Design Automation of Electronic Systems
Verified
Journal Article
Open access
MMMervat Mahmoud
Mervat Mahmoud
NENahla E. Elashkar
Nahla E. Elashkar
HDH. H. Draz
H. H. Draz
Image and video processing algorithms are currently crucial for many applications. Hardware implementation of these algorithms provides higher speed for large computation applications. Removing noise is often a typical pre-processing step to enhance the results of later analysis and processing. Median filter is a typical nonlinear filter that is very commonly used for impulse noise elimination in digital image processing. This article suggests a low-energy median filter hardware design for battery-based hardware applications. An approximate solution with high accuracy is investigated to speed up the filtering operation, reduce the area, and consume less power/energy. Pipelining and parallelism are used to optimize the speed and power of this technique. Non-pipelined, two different pipelined structures, and two parallel architectures versions are designed. The design versions are implemented first with a Virtex-5 LX110T FPGA and then using the UMC 130nm standard cell ASIC technology. The selection and the even-odd sorting-based median filters are also implemented for an equitable comparison with the standard median filtering techniques. The suggested non-pipelined median filter design enhances the throughput 35% more than the highest investigated state of the art. The pipelining enhances the throughput to more than twice its value. Additionally, the parallel architecture decreases the area and the consumed power by around 40%. The simulation results reveal that one of the suggested designs significantly decreases the area, with the same speed as the fastest design in the literature, without noticeably degrading the accuracy, and a significant decrease in energy consumption by about 60%.

25 August 2026 in Biosensors
Verified
Journal Article
Open access
PDF file
Dalia ElsheakhDalia Elsheakh
Dalia Elsheakh
RSRatshih Sayed
Ratshih Sayed
HDH. H. Draz
H. H. Draz
GIGhada H. Ibrahim
Ghada H. Ibrahim
HShttps://scholar.google.com/citations?hl=en&user=ibqBDS4AAAAJ Shawkey
https://scholar.google.com/citations?hl=en&user=ibqBDS4AAAAJ Shawkey
Diabetes is a major worldwide health concern, which emphasizes the critical need for precise and continuous glucose monitoring devices. This paper introduces a novel, non-invasive method for continuous blood glucose monitoring using on-chip multi-arm sensors designed as earbuds by using UMC 0.18 μm technology. The proposed sensor uses the dielectric characteristics of the earbud to detect variations in glucose levels while operating at various resonant frequencies, including 32, 42, 64, and 94 GHz. The sensitivity of the proposed method was evaluated using a reflection coefficient criterion of ∣S11∣≤−6 dB, confirming its ability to achieve accurate detection when implemented within an earbud device. A 3D electromagnetic high-frequency structure simulator (HFSS) is used to validate the simulation. Only |S11| data are used to determine the glucose concentrations in the blinded prediction group. The results demonstrate a strong correlation between sensor responses and glucose levels. The sensor achieved a sensitivity of 12.4 MHz/mg/dL, 6 dB/mg/dL. Moreover, the earbud’s homogeneous tissue architecture and naturally low eccrine sweat gland density lessen susceptibility to confounding physiological variables commonly observed in microwave-based glucose detection. As a major advancement in biomedical sensing technology, this wearable system provides a precise and useful method for non-invasive glucose monitoring.