Дмитро Кузін

Mr. Дмитро Кузін

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2026 in Chemengineering
Verified
Journal Article
Open access
PDF file
Serhiy PyshyevSerhiy Pyshyev
Serhiy Pyshyev
Denis MiroshnichenkoDenis Miroshnichenko
Denis Miroshnichenko
LLLysenko Liudmyla
Lysenko Liudmyla
VRVladislav Reivi
Vladislav Reivi
ДКДмитро Кузін
Дмитро Кузін
MSMariia Shved
Mariia Shved
This study evaluates the association between feedstock sulfur content and atmospheric distillation performance for 19 Ukrainian gas condensates and light crude oils processed under comparable industrial conditions in the Ukrainian Industrial Atmospheric Distillation Unit (UIADU). The feedstocks covered a total sulfur range of 7–4467 ppm. Product-specific analyses used 18 feed–light gasoline (LG) pairs, eight feed–kerosene–diesel (KD) pairs, and seven simultaneous LG–KD pairs. LG sulfur was significantly but weakly associated with feed sulfur (R2 = 0.3069, p = 0.0171). At the same time, KD sulfur showed a significantly stronger association with feed sulfur (R2 = 0.685, p = 0.011). The four-point grouped LG-yield model showed a strong descriptive association (R2 = 0.9525, p = 0.024) but was treated as exploratory because it was based on only four aggregated observations, whereas the grouped KD-yield model was not statistically significant despite a high R2 (R2 = 0.9569, p = 0.1331). In all seven complete paired observations, KD sulfur exceeded LG sulfur. The contribution of the study is the comparative, industrial-scale evaluation of sulfur partitioning and fraction-yield behavior across a compositionally heterogeneous feedstock set, rather than rediscovering preferential sulfur enrichment in higher-boiling fractions. The results support total feed sulfur as a preliminary engineering screening indicator, but not as a standalone causal predictor or a substitute for complete feedstock characterization.

27 May 2026 in Bulletin of the National Technical University "KhPI". Series: Chemistry, Chemical Technology and Ecology
Verified
Journal Article
Closed access
SZSerhii Zharov
Serhii Zharov
OKOleksandr Kvasov
Oleksandr Kvasov
ДКДмитро Кузін
Дмитро Кузін
VMViktor Marchenko
Viktor Marchenko
SNSerhii Naboka
Serhii Naboka
The paper evaluates the activity of regenerated acetone synthesized in the ECO PLUS 122 thermal distillation unit and verifies whether the regenerated solvent is physicochemically safe and can be functionally useful for coating and film application or not. Five contamination levels (ACN0-ACN4) were determined by moisture content, acid number, color value, density, non-volatile residue and evaporation behavior. Thermal profile analysis was performed to describe the boiling behavior of the solvent recovery, and the degree of regeneration and residue formation was measured for all contamination categories. Physicochemical measurements of the regenerated fractions (RACN0-RACN4) were used to evaluate the recovery of solvent purity, and coating-film tests were performed to measure evaporation rate, film uniformity index and gloss at 60o. The results showed that acetone is well recovered with a recovery yield of 94.8% (ACN0) to 85.1% (ACN4). The recovered fractions have low moisture content (0.03-0.12%), low acid number (0.02-0.06 mg KOH/g), low color index and low non-volatile residue content (0.002-0.016%). Coating film tests showed that the recovered acetone is functionally suitable for use in auxiliary paint operations: uniformity and gloss are within acceptable limits, and the evaporation behavior is similar to that of conventional industrial acetone. Overall, the experiment shows that acetone obtained using the ECO PLUS 122 process can be reused in coating activities without harming the solvent and without significantly increasing waste generation and raw material use in paint plants.

4 June 2026 in Integrated Technologies and Energy Saving
Verified
Journal Article
Closed access
Denis MiroshnichenkoDenis Miroshnichenko
Denis Miroshnichenko
LLLiudmyla Lysenko
Liudmyla Lysenko
SZSerhii Zharov
Serhii Zharov
OKOleksandr Kvasov
Oleksandr Kvasov
ДКДмитро Кузін
Дмитро Кузін
SNSerhii Naboka
Serhii Naboka
Complex interactions among formulation chemistry, film integrity, and interfacial sta-bility determine the anticorrosion performance of industrial primer-enamel coating systems. In this study, the influence of key formulation variables on coating quality indicators and cor-rosion behavior was systematically investigated using industrial epoxy-based primers and al-kyd/acrylic enamels. Particular attention was given to the role of zinc phosphate content, or-ganic corrosion inhibitors, and silane adhesion promoters under controlled technological con-ditions. Eight primer-enamel variants were prepared based on identical binder systems and application regimes, differing only in formulation parameters. All coatings were applied to steel substrates under standardized surface preparation, curing, and film formation conditions. Coating quality indicators, including dry film thickness, adhesion to steel, film compactness, defect tendency, and functional inhibitor activity, were evaluated to characterize film integrity before corrosion assessment.Corrosion resistance trends were subsequently analyzed using a comparative frame-work that emphasizes relative performance differences among formulation variants. The results demonstrate that coating performance cannot be attributed to a single factor. Increased zinc phosphate content primarily enhanced barrier continuity and film compactness, while silane adhesion promoters significantly improved interfacial bonding and reduced susceptibil-ity to underfilm corrosion. Organic corrosion inhibitors contributed independently to corro-sion suppression by limiting electrochemical activity at the metal-coating interface without altering bulk film morphology. The highest corrosion resistance was observed for formula-tions combining enhanced barrier properties, strong adhesion, and active inhibitor functionali-ty, indicating a synergistic interaction between structural and functional protection mecha-nisms.The findings establish clear formulation-performance relationships for industrial pri-mer-enamel systems and highlight the importance of balanced chemical and technological design for achieving durable anticorrosion protection.