Xiao Liu

Dr. Xiao Liu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2017 in Metals
Verified
Journal Article
Open access
PDF file
XLXiao Liu
Xiao Liu
XWXijing Wang
Xijing Wang
BWBoshi Wang
Boshi Wang
ZLZhang Liangliang
Zhang Liangliang
CYChao Yang
Chao Yang
TCTingxi Chai
Tingxi Chai
Contrast experiments of lap joints among dissimilar AZ31B Mg alloy, Mg99.50, zinc-coated DP600 sheet, and non-zinc-coated DP600 sheet were made by friction stir keyholeless spot welding (FSKSW) and vacuum diffusion welding (VDW), respectively. Scanning electron microscopy (SEM) and energy disperse spectroscopy (EDS) were used to investigate the microstructures and components of the joints welded. The experimental results show that the FSKSW bonding method is a kind of compound mode that contains a mechanical connection and element diffusion fusion connection, in which mechanical connection has the main decisive function on joints of Mg/steel. Elements diffusion exists in the interfacial region of the joints and the elements diffusion extent is basically the same to that of VDW. The elements’ diffusion in Mg/steel using FSKSW is defined in the reaction between small amounts elements of the base metal and zinc-coated metals. The intermetallic compounds and composite oxide perform some reinforcement on the mechanical connection strength.

1 October 2025 in Materials Research Express
Verified
Journal Article
Open access
YWYiqi Wang
Yiqi Wang
XLXiao Liu
Xiao Liu
CZChunkai Zhou
Chunkai Zhou
HWHongjin Wang
Hongjin Wang
HNHongwei Niu
Hongwei Niu
BZBin Zhu
Bin Zhu
In this study, thin-walled 7075 aluminum alloy samples were fabricated using Single-Bead Multi-Layer Wire Arc Additive Manufacturing (WAAM) with self-developed 7075 aluminum alloy welding wire and metal inert gas (MIG) welding. The samples underwent solid solution treatment followed by double-stage aging heat treatment. The metallographic structure, precipitate phases, and mechanical properties of the additive samples before and after heat treatment were investigated using optical microscopy (OM), electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The results indicate that, without heat treatment, the grains in the WAAM 7075 aluminum alloy samples exhibited a distinct weld structure with noticeable orientation. The precipitated phases, such as η(MgZn2), S (Al2CuMg), and T (AlZnMgCu), were observed to form along the grain boundaries, with high-melting-point compounds like AlMnFeSi, Al13Fe4, and Mg2Si serving as nuclei. The weak fusion zones between adjacent weld beads contributed to poor mechanical properties in the as-deposited state, with no significant difference in mechanical performance between the Y(deposition direction) and X(cladding direction). After heat treatment, the η, S, and T phases were completely dissolved into the matrix, resulting in solid solution strengthening and aging. The interlaminar fusion zone (IFZ) grains recrystallized into equiaxed structures, improving the tensile strength and elongation in the cladding direction to 464.2 MPa and 13.11%, respectively. However, the presence of residual insoluble Fe and Si compounds limited further mechanical property improvements, and large pores densely distributed within the interlayer caused lower mechanical properties in the deposition direction compared to the cladding direction.