Navigation and exploration in 3D environments is still a challenging task for autonomous robots that move on the ground. Robots for Search and Rescue missions must deal with unstructured and very complex scenarios. This paper presents a path planning system for navigation and exploration of ground robots in such situations. We use (unordered) point clouds as the main sensory input without building any explicit representation of the environment from them. These 3D points are employed as space samples by an Optimal-RRTplanner (RRT ) to compute safe and efficient paths. The use of an objective function for path construction and the natural exploratory behaviour of the RRT planner make it appropriate for the tasks. The approach is evaluated in different simulations showing the viability of autonomous navigation and exploration in complex 3D scenarios.
The article focuses on specific challenges of the design of a reconnaissance mobile robotic system aimed for inspection in underground coal mine areas after a catastrophic event. Systems that are designated for these conditions must meet specific standards and regulations. In this paper is discussed primarily the main conception of meeting explosion safety regulations of European Union 2014/34/EU (also called ATEX—from French “Appareils destinés à être utilisés en ATmosphères Explosives”) for Group I (equipment intended for use in underground mines) and Category M1 (equipment designed for operation in the presence of an explosive atmosphere). An example of a practical solution is described on main subsystems of the mobile robot TeleRescuer—a teleoperated robot with autonomy functions, a sensory subsystem with multiple cameras, three-dimensional (3D) mapping and sensors for measurement of gas concentration, airflow, relative humidity, and temperatures. Explosion safety is ensured according to the Technical Report CLC/TR 60079-33 “s” by two main independent protections—mechanical protection (flameproof enclosure) and electrical protection (automatic methane detector that disconnects power when methane breaches the enclosure and gets inside the robot body).
1 October 2020 in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
A low-cost, low-weight leaky feeder system is proposed for mines rescue communication for use when the mine’s permanent communication infrastructure has been compromised by an incident. Unlike the leaky feeders that are permanently installed in some transport tunnels and mines, which are very expensive, bulky and heavy, the system described here relies on the fact that some ordinary coaxial cables leak signal unintentionally. Experimental evaluation of the two main types of low-cost coaxial cable identified a suitable cable and an optimal frequency of 27 MHz. Longer range tests characterised the real world underground performance of a system. A range of around a kilometre is achievable but this could be increased substantially by using in-line amplifiers. In comparison to low-frequency guidewire systems that have previously been produced for mines rescue use, the method outlined here does not force rescuers to clip handsets to the cable, thereby allowing them much more freedom of movement.
Rescue tasks in coal mines are fundamental but often suppose the loss of rescuers lives, as currently they are carried out only by humans. TeleRescuer project expects to make this activity safer by developing a robot to be driven by rescuers from a safe area. It offers virtual teleportation providing to the operator an environment where he can interact with the reality perceived by the robot. In this paper, the design of the communication, vision and sensory systems are presented, giving an overview of all the elements that are included in the robot. The adaptation of these electronics to the hazardous environment is also explained. A prototype of an ad-hoc wireless network and results in terms of the transmission characteristics are shown.