In some cases, the improvement of the bypass ratio (BPR) of turbofans is pursued for military or civilian purposes owing to economic, environmental, and performance reasons, among others. However, high-BPR turbofans suffer from incompatibility of spool speed, complex structure for manufacture, development difficulty, and substantially increasing costs, especially for those with small batch production. To deal with the issues, a novel low-cost concept of high-BPR turbofan with air-driven fan (ADTF) is presented in this research. First, the problems faced by high-BPR turbofans are discussed, and the difficulties of geared turbofan (GTF), which is developed as a solution to the problems, are analyzed. A novel turbofan with potential advantages is proposed, and its basic theory is interpreted. Second, high-BPR ADTF is analyzed at the top level, and the design principle and important primary parameters are discussed. Some important concepts and criteria are proposed, enabling the comparison between ADTF and GTF. Finally, an air-driven fan system, the core part of ADTF, is exploratorily designed, and numerical simulation is performed to demonstrate its feasibility.
The reduction in specific fuel consumption (SFC) is crucial for small/mid-size cost-controllable aircraft, which is very conducive to reducing cost and carbon dioxide emissions. To decrease the SFC, increasing the bypass ratio (BPR) is an important way. Conventional high-BPR engines have several limitations, especially the conflicting spool-speed requirements of a fan and a low-pressure turbine. This research proposes an air-driven fan with a tip turbine (ADFTT) as a potential device for a high-bypass propulsion system. Moreover, a possible application of this ADFTT is introduced. Thermodynamic analysis results show that an ADFTT can improve thrust from a prototype turbofan. As a demonstration, we selected a typical small-thrust turbofan as the prototype and applied the ADFTT concept to improve this model. Three-dimensional flow fields were numerically simulated through a Reynolds averaged Navier-Stokes (RANS)-based computational fluid dynamics (CFD) method. The performance of this ADFTT has the possibility of amplifying the BPR more than four times and increasing the thrust by approximately 84% in comparison with the prototype turbofan.
High thrust and low specific fuel consumption (SFC) are important for vertical takeoff and landing (VTOL) vehicles. An effective way to decrease the SFC is to increase the bypass ratio (BPR) of the propulsion system. The air-driven fan (or fan-in-wing) has a very high bypass ratio and has proved to be successful in VTOL aircrafts. However, the tip turbine that extracts energy for the air-driven fan faces the low-solidity problem and performs inadequately. In this study, we developed a high-reaction method for the aerodynamic design of a tip turbine to solve the low-solidity problem. A typical tip turbine was selected and designed by both conventional and high-reaction methods. Three-dimensional flow fields were numerically simulated through a Reynolds-averaged Navier-Stokes (RANS)-based computational fluid dynamics (CFD) method. The energy extraction rate was proposed to evaluate and display the energy extraction capability of the turbine. The results showed that the high-reaction turbine could solve the low-solidity problem and significantly increase the isentropic efficiency from approximately 80.0% to 85.6% and improve the isentropic work by 71.9% compared with the conventional method (from 10.28 kW/kg to 17.67 kW/kg).