In this paper, a method of predicting the motion state of a moving target in the base coordinate system by hand-eye vision and the position and attitude of the end is proposed. The predicted value is used as the velocity feedforward, and the position-based visual servo method is used to plan the velocity of the end of the manipulator. It overcomes the influence of end coordinate system motion on target prediction in a discrete system and introduces an integral control method to compensate for the prediction velocity, eliminating the end tracking error caused by target velocity prediction error. The effectiveness of this method is verified by simulation and experiment.
With increasing of the size of spatial truss structures, the beam component will be subjected to the overall motion with large deformation. Based on the local frame approach and the geometrically exact beam theory, a beam finite element, which can effectively reduce the rotational nonlinearity and is appropriate for finite motion and deformation issues, is developed. Dynamic equations are derived in the Lie group framework. To obtain the symmetric Jacobian matrix of internal forces, the linearization operation is conducted based on the previously converged configuration. The iteration matrix corresponding to the rotational parameters, including the Jacobian matrix of inertial and internal forces in the initial configuration, can be maintained in the simulation, which drastically improves the computational efficiency. Based on the Lagrangian multiplier method, the constraint equation and its Jacobian matrix of sliding joint are derived. Furthermore, the isogeometric analysis (IGA) based on the non-uniform rational B-splines (NURBS) basis functions, is adopted to interpolate the displacement and rotation fields separately. Finally, three dynamic numerical examples including a deployment dynamic analysis of spatial truss structure are conducted to verify the availability and the applicability of the proposed formulation.
To address the safety, efficiency, and adaptability challenges of autonomous path planning for lunar rovers in complex and unknown terrain, this study proposes a path planning method that integrates deep reinforcement learning with Hybrid A*. Multi-level obstacle maps are generated from lunar digital elevation models and local terrain reconstruction, and an environment model integrating terrain features and rover states is constructed. A Deep Deterministic Policy Gradient framework is introduced, including a state encoder, a policy network, and dual Q-networks, to dynamically adapt the search parameters of Hybrid A* and optimize the path-cost function online. Simulation experiments are conducted under simple, moderate, and complex scenarios. The results show that the proposed method achieves a 100% path planning success rate in the evaluated baseline scenarios, with comprehensive accuracy scores of 0.931, 0.907, and 0.886, respectively. It outperforms conventional A*, RRT, and Hybrid A* algorithms in path length, smoothness, and safety. The method can support safe and efficient autonomous exploration by lunar rovers under the tested dynamic-illumination and multi-obstacle conditions and provides technical support for future deep-space exploration missions such as Chang’e and Tianwen.
To address the scarcity of high-precision control points on planetary surfaces and the accumulated drift of conventional relative-localization methods in deep-space exploration missions, this paper proposes a visual absolute-localization method based on salient-landmark contour matching and centroid-consistency constraints. Absolute localization is defined as estimating the rover position in the landing-site North-East-Down (NED) coordinate system or a map-projection coordinate system, rather than in image-pixel coordinates. Stable natural objects, including dunes and impact craters, are treated as generalized feature points. Local terrain is reconstructed from binocular navigation imagery; LiDAR is additionally used in the ground physical-equivalent experiment for multi-source terrain fusion. Multi-class cross-scale contour matching provides homologous landmark associations, after which centroid consistency aligns the local terrain with the global DOM/DEM reference frame. For ten Tianwen-1/Zhurong camera stations, the mean planar error was 0.458 m and the RMSE was 0.491 m. For five ground-test conditions, the mean planar error was 0.494 m and the RMSE was 0.526 m; all tested errors were below 1 m. Because the in-orbit reference DOM has a ground sampling distance of 1 m/pixel, the in-orbit sub-meter values indicate agreement with the adopted reference products and should not be interpreted as absolute accuracy independent of reference-map uncertainty. The results support the feasibility of natural-landmark-based map localization for future Chang’e and Tianwen missions.