Xinchao XU

Prof. Dr. Xinchao XU

Liaoning Technical University
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
XXXinchao XU
Xinchao XU
XFXiaotian Fu
Xiaotian Fu
HZHanguang Zhao
Hanguang Zhao
MLMingyue Liu
Mingyue Liu
AXAigong Xu
Aigong Xu
YMYouQing Ma
YouQing Ma
Craters on the lunar surface are the most direct method for the study of geological processes and are of great significance to the study of lunar evolution. In order to fill the research gap on small craters (diameter less than 3 m), we focus on the small craters around the moving path of the Yutu-2 lunar rover and carry out a 3D reconstruction and geometrical morphology analysis on them. First, a self-calibration model with multiple feature constraints is used to calibrate the navigation camera and obtain the internal and external parameters. Then, the sequence images with overlapping regions from neighboring stations are used to obtain the precise position of the rover through the bundle adjustment (BA) method. After that, a cross-scale cost aggregation for a stereo matching network is proposed to obtain a parallax map, which can further obtain 3D point clouds of the lunar surface. Finally, the indexes of the craters are extracted (diameter D, depth d, and depth–diameter ratio dr), and the different indicators are fitted and analyzed. The results suggest that CscaNet has an anomaly percentage value of 1.73% in the KITTI2015 dataset, and an EPE of 0.74 px in the SceneFlow dataset, both of which are superior to GC-Net, DispNet, and PSMnet, and have higher reconstruction accuracy. The correlation between D and d is high and exhibits a positive correlation, while the correlation between D and dr is low. The geometric morphology expressions of small craters fitted by using D and d are significantly different from the expressions proposed by other scholars for large craters. This study provides a priori knowledge for the subsequent Von Karmen crater survey mission in the SPA Basin.

30 September 2023 in Sensors
Verified
Journal Article
Open access
PDF file
XXXinchao XU
Xinchao XU
HZHanguang Zhao
Hanguang Zhao
XFXiaotian Fu
Xiaotian Fu
MLMingyue Liu
Mingyue Liu
HQHaolei Qiao
Haolei Qiao
YMYouQing Ma
YouQing Ma
Aiming at the problems of the poor recognition effect and low recognition rate of the existing methods in the process of belt deviation detection, this paper proposes a real-time belt deviation detection method. Firstly, ResNet18 combined with the attention mechanism module is used as a feature extraction network to enhance the features in the belt edge region and suppress the features in other regions. Then, the extracted features are used to predict the approximate locations of the belt edges using a classifier based on the contextual information on the fully connected layer. Next, the improved gradient equation is used as a structural loss in the model training stage to make the model prediction value closer to the target value. Then, the authors of this paper use the least squares method to fit the set of detected belt edge line points to obtain the accurate belt edge straight line. Finally, the deviation threshold is set according to the requirements of the safety production code, and the fitting results are compared with the threshold to achieve the belt deviation detection. Comparisons are made with four other methods: ultrafast structure-aware deep lane detection, end-to-end wireframe parsing, LSD, and the Hough transform. The results show that the proposed method is the fastest at 41 frames/sec; the accuracy is improved by 0.4%, 13.9%, 45.9%, and 78.8% compared to the other four methods; and the F1-score index is improved by 0.3%, 10.2%, 32.6%, and 72%, respectively, which meets the requirements of practical engineering applications. The proposed method can be used for intelligent monitoring and control in coal mines, logistics and transport industries, and other scenarios requiring belt transport.

16 January 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
XXXinchao XU
Xinchao XU
MLMingyue Liu
Mingyue Liu
SPSong Peng
Song Peng
YMYouQing Ma
YouQing Ma
HZHongxi Zhao
Hongxi Zhao
AXAigong Xu
Aigong Xu
In order to complete the high-precision calibration of the planetary rover navigation camera using limited initial data in-orbit, we proposed a joint adjustment model with additional multiple constraints. Specifically, a base model was first established based on the bundle adjustment model, second-order radial and tangential distortion parameters. Then, combining the constraints of collinearity, coplanarity, known distance and relative pose invariance, a joint adjustment model was constructed to realize the in orbit self-calibration of the navigation camera. Given the problem of directionality in line extraction of the solar panel due to large differences in the gradient amplitude, an adaptive brightness-weighted line extraction method was proposed. Lastly, the Levenberg-Marquardt algorithm for nonlinear least squares was used to obtain the optimal results. To verify the proposed method, field experiments and in-orbit experiments were carried out. The results suggested that the proposed method was more accurate than the self-calibration bundle adjustment method, CAHVOR method (a camera model used in machine vision for three-dimensional measurements), and vanishing points method. The average error for the flag of China and the optical solar reflector was only 1 mm and 0.7 mm, respectively. In addition, the proposed method has been implemented in China’s deep space exploration missions.

2 February 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
CQChen Qi
Chen Qi
SLShaochuang Liu
Shaochuang Liu
YXYaming Xu
Yaming Xu
AXAigong Xu
Aigong Xu
JZJianli Zhang
Jianli Zhang
YYYongzhe Yan
Yongzhe Yan
Tianwen-1 is the first Mars probe launched by China and the first mission in the world to successfully complete the three steps of exploration (orbiting, landing, and roving) at the one time. Based on the unverifiable descent images which cover the full range of the landing area, trajectory recovery and fine terrain reconstruction are important parts of the planetary exploration process. In this paper, a novel trajectory recovery and terrain reconstruction (TR-TR) algorithm employing descent images is proposed for the dual-restrained conditions: restraints of the flat terrain resulting in an unstable solution of the descent trajectory and of the parabolic descent trajectory causing low accuracy of terrain reconstruction, respectively. A landing simulation experiment on a landing field with Mars-like landform was carried out to test the robustness and feasibility of the algorithm. The experiment result showed that the horizontal error of the recovered trajectory didn’t exceed 0.397 m, and the elevation error of the reconstructed terrain was no more than 0.462 m. The algorithm successfully recovered the descent trajectory and generated high-resolution terrain products using in-orbit data of Tianwen-1, which provided effective support for the mission planning of the Zhurong rover. The analysis of the results indicated that the descent trajectory has parabolic properties. In addition, the reconstructed terrain contains abundant information and the vertical root mean square error (RMSE) of ground control points is smaller than 1.612 m. Terrain accuracy obtained by in-orbit data is lower than that obtained by field experiment. The work in this paper has made important contributions to the surveying and mapping of Tianwen-1 and has great application value.

17 July 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HTHe Tian
He Tian
HZHanguang ZHAO
Hanguang ZHAO
XXXinchao XU
Xinchao XU
PXPengfei Xin
Pengfei Xin
WSWentao Song
Wentao Song
Youqing MaYouqing Ma
Youqing Ma
To address the safety, efficiency, and adaptability challenges of autonomous path planning for lunar rovers in complex and unknown terrain, this study proposes a path planning method that integrates deep reinforcement learning with Hybrid A*. Multi-level obstacle maps are generated from lunar digital elevation models and local terrain reconstruction, and an environment model integrating terrain features and rover states is constructed. A Deep Deterministic Policy Gradient framework is introduced, including a state encoder, a policy network, and dual Q-networks, to dynamically adapt the search parameters of Hybrid A* and optimize the path-cost function online. Simulation experiments are conducted under simple, moderate, and complex scenarios. The results show that the proposed method achieves a 100% path planning success rate in the evaluated baseline scenarios, with comprehensive accuracy scores of 0.931, 0.907, and 0.886, respectively. It outperforms conventional A*, RRT, and Hybrid A* algorithms in path length, smoothness, and safety. The method can support safe and efficient autonomous exploration by lunar rovers under the tested dynamic-illumination and multi-obstacle conditions and provides technical support for future deep-space exploration missions such as Chang’e and Tianwen.

10 August 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HTHe Tian
He Tian
HZHanguang ZHAO
Hanguang ZHAO
XXXinchao XU
Xinchao XU
PXPengfei Xin
Pengfei Xin
WSWentao Song
Wentao Song
Youqing MaYouqing Ma
Youqing Ma
To address the scarcity of high-precision control points on planetary surfaces and the accumulated drift of conventional relative-localization methods in deep-space exploration missions, this paper proposes a visual absolute-localization method based on salient-landmark contour matching and centroid-consistency constraints. Absolute localization is defined as estimating the rover position in the landing-site North-East-Down (NED) coordinate system or a map-projection coordinate system, rather than in image-pixel coordinates. Stable natural objects, including dunes and impact craters, are treated as generalized feature points. Local terrain is reconstructed from binocular navigation imagery; LiDAR is additionally used in the ground physical-equivalent experiment for multi-source terrain fusion. Multi-class cross-scale contour matching provides homologous landmark associations, after which centroid consistency aligns the local terrain with the global DOM/DEM reference frame. For ten Tianwen-1/Zhurong camera stations, the mean planar error was 0.458 m and the RMSE was 0.491 m. For five ground-test conditions, the mean planar error was 0.494 m and the RMSE was 0.526 m; all tested errors were below 1 m. Because the in-orbit reference DOM has a ground sampling distance of 1 m/pixel, the in-orbit sub-meter values indicate agreement with the adopted reference products and should not be interpreted as absolute accuracy independent of reference-map uncertainty. The results support the feasibility of natural-landmark-based map localization for future Chang’e and Tianwen missions.