To fill the shortages in the knowledge of the pyrolysis and combustion properties of new and aged polyvinyl chloride (PVC) sheaths, several experiments were performed by thermogravimetric analysis (TG), Fourier transform infrared (FTIR), microscale combustion calorimetry (MCC), and cone calorimetry. The results show that the onset temperature of pyrolysis for an aged sheath shifts to higher temperatures. The value of the main derivative thermogravimetric analysis (DTG) peak of an aged sheath is greater than that of a new one. The mass of the final remaining residue for an aged sheath is also greater than that of a new one. The gas that is released by an aged sheath is later but faster than that of a new one. The results also show that, when compared with a new sheath, the heat release rate (HRR) is lower for an aged one. The total heat release (THR) of aged sheath is reduced by 16.9–18.5% compared to a new one. In addition, the cone calorimetry experiments illustrate that the ignition occurrence of an aged sheath is later than that of a new one under different incident heat fluxes. This work indicates that an aged sheath generally pyrolyzes and it combusts more weakly and incompletely.
In order to ensure the safety of inflammable and explosive chemical substance such as nitrocellulose (NC) mixtures in the process of handing, storage, and usage, it is necessary to obtain the fire properties of NC with different exterior structures. In present study, fire properties of two commonly used nitrocelluloses with soft fiber structure and white chip structure were investigated by scanning electron microscope (SEM) and the ISO 5660 cone calorimeter. Experimental findings revealed that the most important fire properties such as ignition time, mass loss rate and ash content exhibited significant differences between the two structures of NC. Compared with the soft fiber NC, chip NC possesses a lower fire hazard, and its heat release rate intensity (HRRI) is mainly affected by the sample mass. In addition, oxygen consumption (OC) calorimetry method was compared with thermal chemistry (TC) method based on stoichiometry for HRRI calculation. HRRI results of NC with two structures obtained by these two methods showed a good consistency.
To improve flame retardancy of wood, a novel high-water-retention and self-healing polyvinyl alcohol/phytic acid/MXene hydrogel coating was developed through facile one-pot heating and freeze–thaw cycle methods, and then painted on wood surface. The coating exhibit excellent self-healing property and significantly enhanced water-retention property (water content ≥ 90 wt%), due to the increased hydrogen bonds within the coating system with the presence of MXene nanosheets. Compared to pristine wood, the flame retardancy of coated wood is greatly improved, such as passed V0 rating in UL-94 test, increasing time to ignition (TTI, from 32 to 69 s), and decreased heat release rate and total heat release by 41.6% and 36.14%. The cooling effect and large thermal capacity of high-water-retention hydrogel, and physical barrier effects for flammable gas products, heat and oxygen by MXene nanosheets and the compact char layer formed during combustion play key roles in the flame retardancy enhancements of the wood. High thermal stability of MXene nanosheets is another beneficial factor. The detailed flame-retardant and self-healing mechanisms were proposed.
The electric vehicle industry is developing rapidly as part of the global energy structure transformation, which has increased the importance of overcoming power battery safety issues. In this paper, first, we study the relationship between different types of vehicle faults and battery data based on the actual vehicle operation data in the big data supervisory platform of new energy vehicles. Second, we propose a method to realize the online prediction of electric vehicle battery faults, based on a Long Short-Term Memory (LSTM). Third, we carry out prediction research for two kinds of faults: low State of Charge (SOC) alarm and insulation alarm. Last, we show via experimental results that the model based on the LSTM network can effectively predict battery faults with an accuracy of more than 85%. Through this research, it is possible to complete online pre-processing of vehicle operation data and fault prediction of power batteries, improve vehicle monitoring capabilities and ensure the safety of electric vehicle use.
The aim of this study was to evaluate the transport phenomena of smoke flow and vertical temperature distribution in a 21-story stairwell with multiple fire locations and openings. A large eddy simulation (LES) method was used to model the smoke flow in a stairwell model with a set of simulation parameters, wherein the fire heat release rate (HRR) and fire location were varied. Based on the results, a wall attachment effect was found in three-dimensional figures. Moreover, with an increase in the fire HRR, the effects were more pronounced. The simulation results verified that the vertical temperature distribution is an index model with a natural logarithm, where the pre-finger factor and attenuation coefficient increase considerably in accordance with an increase in the fire HRR. Moreover, there was a decrease in the maximum temperature (Tm) with an increase in the fire location factor (h*) due to the upward thermal smoke. Moreover, heat mainly accumulates in the area above a fire source. However, h* has a slight influence on the time required to reach Tm within the range of 53–64 s. Furthermore, the direction of the airflow at each side opening in the stairwell varied in accordance with the variation in the fire location changes, and a regular calculation was carried out.