Suhaib Y.K. Al-Darzi

Prof. Dr. Suhaib Y.K. Al-Darzi

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 October 2024 in Tikrit Journal of Engineering Sciences
Verified
Journal Article
Open access
PDF file
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi
KIKaythar Abdulwahab Ibrahim
Kaythar Abdulwahab Ibrahim
Oday Asal SalihOday Asal Salih
Oday Asal Salih
In the present study, eight reinforced concrete slabs divided into four groups with two slabs per group were fabricated and tested under impact load, replacing their aggregate with 0%, 4%, 8%, and 16% of polyethylene terephthalate) PET). During the preparation process, PET materials increased the workability of fresh concrete by up to 16% and decreased the density by 9%. The compressive strength decreased by about 11.7%, 15.7%, and 19.9% using 4%, 8%, and 16% of PET, respectively. Splitting strength decreased by 7.2%, 17.4%, and 20.3% using 4%, 8%, and 16% of PET, respectively. Failure mode and deflection amplitude results showed that PET delayed the first cracks and reduced the crack lengths and width and crack spreading at failure. Also, impact resistance enhanced at the first crack and ultimate load stages when PET was used compared to normal concrete. The maximal and minimal displacement decreased with increasing PET proportion to 8% and 16%. The slabs were modeled using the finite element program SAP2000 with 4-node shell elements. The finite element (FE) analysis showed a similar deflection response as those experimentally obtained for all slabs. The deflection obtained by FE was less, about 15.5% and 19%, compared with all slabs experimentally tested except slab G2-2, which showed a higher deflection of about 16.3%.

15 December 2025 in Asian Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
AAAhmed A. Mohammed Ali
Ahmed A. Mohammed Ali
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi

1 March 2025 in Al-Rafidain Engineering Journal (AREJ)
Verified
Journal Article
Open access
PDF file
AAAlaulddin Abdulrahman Al-Jafal
Alaulddin Abdulrahman Al-Jafal
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi
This study is focusing on H steel sections embedded in concrete by evaluating various shear connectors, including headed studs, bolts, steel angles, perfobonds, and self-connected variants. This comprehensive examination of nine specimens aims to understand their load-bearing capacity, failure mechanisms, and overall performance in structural composite connections. The paper thoroughly compares and analyzes the load-slip curves, average initial shear stiffness, ultimate load, ductility, and fracture energy for these connectors. The research highlights self-connected connectors with rebars passing through flanges demonstrating substantial increases in ultimate load (41 %) in comparison to natural bond only, and maintaining ductility post-peak. Moreover, through this study it has been found that when shear studs and shear angles are designed for equivalent loads exhibit remarkably similar performance. Additionally, adding extra connectors to the web of H-sections enhances load capacity and stiffness but reduces ductility. The double shear in 10 mm diameter 8.8 bolted (with two nuts inside and outside flange) connectors raise the ultimate load but shift the curve of load slip from ductile to brittle in comparison with the same diameter studs.

14 April 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
Oday Asal SalihOday Asal Salih
Oday Asal Salih
KIKaythar Abdulwahab Ibrahim
Kaythar Abdulwahab Ibrahim
MSMohammmed Husham Shukur
Mohammmed Husham Shukur
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi
SASofyan Younis Ahmed
Sofyan Younis Ahmed
A novel retrofitting method was tested to open steel girder webs. As no standard covers these procedures, this study examined the effect of mid-span apertures on AISC-designed narrow I-beams. Ten specimens with 1.8m length, 0.8m height, and 0.3m flange width were examined, with four simulated in ANSYS to validate results and explore parametric effects (yield stress and web thickness). Openings lower strength by 43% and increase deflection by 10%. Two retrofitting options involve patch plates welded to one or both sides of the aperture. Patch plate retrofitting removes 8% deflection and restores 26% strength. As an alternate retrofitting option, adding two stiffeners to the opening sides increases strength by 73% and reduces deflections by 68%. Patches and stiffeners work best together, improving strength by 123% and lowering deflection by 89%. Testing the modified specimens demonstrated that patch plate welding to treat steel web openings works well. Instead of treating the opening, stiffeners on the side improve girder behaviour. Experimental and finite element analysis results match at different levels. Additionally, numerical stress findings provide a satisfactory estimate of beam element stress.

1 January 2024 in Open Engineering
Verified
Journal Article
Open access
PDF file
LALawend Kamal Askar
Lawend Kamal Askar
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi
BABayar Jafar Mohamed Al-Sulayfani
Bayar Jafar Mohamed Al-Sulayfani
Over the past few decades, composite joints have been regarded as one of the most promising approaches. After reviewing the research articles dealing with composite beam-column joints, it can be withdrawn that few researchers studied and developed different types of composite beam-column joints. The objectives of this paper to study the effect and behavior of different connection types on the composite beam – column joint under repeated loading as well as to investigate new forms of slab connection with column flange in composite connection joints, aiming to enhance the behaviors of the joints and make the slab endure a part of the load in a more efficient way. Five specimens with various connection types were tested to failure; the composite model number two (CM2) was considered the control specimen. Regarding the ultimate moment, the result found that CM5 has moment 50.47% more than control specimen, the lowest rotation value was in CM5. The general behaviours of the FEM were in good accordance with the experiment results. According to the parametric a higher yield strength is more rigid stiffer, the effect of web thickness on the load is too small and increase in load resistance with an increase in beam flange thickness.

14 August 2026 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
Oday Asal SalihOday Asal Salih
Oday Asal Salih
KIKaythar Abdulwahab Ibrahim
Kaythar Abdulwahab Ibrahim
MSMohammmed Husham Shukur
Mohammmed Husham Shukur
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi
SASofyan Y. Ahmed
Sofyan Y. Ahmed
Accidental web openings caused by impact, corrosion, or conflict-related damage can substantially reduce the strength, stiffness, and stability of steel bridge girders. Although numerous studies have examined beams containing intentionally designed web openings, limited experimental research has systematically compared practical rehabilitation methods for accidental openings in slender-web plate girders. This study experimentally and numerically evaluates several rehabilitation configurations incorporating welded patch plates and transverse stiffeners. Ten slender-web steel girder specimens, each 1800 mm long, 800 mm deep, and 300 mm wide, were tested under monotonic concentrated loading at mid-span. Nonlinear finite element models were also developed to qualitatively examine the principal deformation and instability trends. Relative to the control specimen, the untreated web opening reduced the ultimate load by approximately 43% and exhibited approximately 10% greater deflection at its respective ultimate load. One-sided and two-sided welded patch plates increased the ultimate load of the damaged specimen by approximately 22% and 26%, respectively. Transverse stiffeners increased the ultimate load by approximately 73% while exhibiting substantially lower ultimate-load deflections. The combined use of patch plates and transverse stiffeners provided the greatest improvement, increasing the ultimate load by approximately 101–123% relative to the untreated damaged specimen and substantially reducing lateral instability. The findings demonstrate that effective rehabilitation of slender-web girders requires not only restoration of the interrupted load path but also restraint of web instability.