Oday Asal Salih

Dr. Oday Asal Salih

Civil Engineering Department, University of Mosul, Mosul, Nīnawá, Iraq
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 August 2023 in Cogent Engineering
Verified
Journal Article
Open access
MSMohammed H. Shukur
Mohammed H. Shukur
KIKaythar Abdulwahab Ibrahim
Kaythar Abdulwahab Ibrahim
SASuhaib Yahya Al-Darzi
Suhaib Yahya Al-Darzi
Oday Asal SalihOday Asal Salih
Oday Asal Salih

8 October 2024 in Tikrit Journal of Engineering Sciences
Verified
Journal Article
Open access
PDF file
SASuhaib Y.K. Al-Darzi
Suhaib Y.K. Al-Darzi
KIKaythar Abdulwahab Ibrahim
Kaythar Abdulwahab Ibrahim
Oday Asal SalihOday Asal Salih
Oday Asal Salih
In the present study, eight reinforced concrete slabs divided into four groups with two slabs per group were fabricated and tested under impact load, replacing their aggregate with 0%, 4%, 8%, and 16% of polyethylene terephthalate) PET). During the preparation process, PET materials increased the workability of fresh concrete by up to 16% and decreased the density by 9%. The compressive strength decreased by about 11.7%, 15.7%, and 19.9% using 4%, 8%, and 16% of PET, respectively. Splitting strength decreased by 7.2%, 17.4%, and 20.3% using 4%, 8%, and 16% of PET, respectively. Failure mode and deflection amplitude results showed that PET delayed the first cracks and reduced the crack lengths and width and crack spreading at failure. Also, impact resistance enhanced at the first crack and ultimate load stages when PET was used compared to normal concrete. The maximal and minimal displacement decreased with increasing PET proportion to 8% and 16%. The slabs were modeled using the finite element program SAP2000 with 4-node shell elements. The finite element (FE) analysis showed a similar deflection response as those experimentally obtained for all slabs. The deflection obtained by FE was less, about 15.5% and 19%, compared with all slabs experimentally tested except slab G2-2, which showed a higher deflection of about 16.3%.

1 January 2023 in Journal of Applied Engineering Science
Verified
Journal Article
Open access
PDF file
MJMohammed Jamel
Mohammed Jamel
Oday Asal SalihOday Asal Salih
Oday Asal Salih
AHAyman Talib Hameed
Ayman Talib Hameed
AAA.I. Al-Hadidy
A.I. Al-Hadidy
One the enormous amount of waste polyethylene (PE) materials amassing in Iraq is posing an expensive landfill and disposal issue. The current study examines the potential for employing PE as a partial replacement for environmentally friendly pavement construction. Different amounts of PE were used to partially replace asphalt cement (3 %, 6 %, 9 %, and 12 % by weight). The PE-substituted asphalt (PESA) binders were subjected to the rheological and compatibility properties. Additionally, two asphalt concrete (AC) mixtures-one control and one PEAC-were created for the mechanical and durability experiments. Among the parameters assessed during the tests are the following: adhesion to a variety of substrates and substrate surfaces; elongation at room temperature (aging index); flexibility at elevated temperatures (cracking index); temperature susceptibility; compatibility; and the extensional viscosity of the PESA binder as well as the extensional viscosity of the PESA-mixture (PESAM). Furthermore, the mechanical and durability properties of AC and PEAC mixes were examined using the Marshall stability, Marshall quotient, static indirect tensile strength at 25 and 60°C, tensile strength ratio, and resilient modulus 25°C tests. Results show that PESA binder outperforms virgin asphalt binder in terms of cracking and temperature resistance. PEAC mixture exhibits higher stability, indirect tensile strength, moisture resistance and resilient modulus than AC mixture. According to standard and durability testing, replacing virgin binder with six percent PE can be recyclable and suitable for use as sustainable material for paving applications.

1 September 2011 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
CBChang Ming Bu
Chang Ming Bu
YLYing Min Li
Ying Min Li
Oday Asal SalihOday Asal Salih
Oday Asal Salih
2008 Wenchuan earthquake has showed that failure of masonry walls is one of the major causes of material damage and loss of human life due to seismic events. Therefore, study of masonry walls seismic behavior and development of effective and practical retrofitting schemes is an urgent need. So this work presents an experimental program that investigates in-plane seismic behavior of common types of shale masonry walls before and after retrofitting using epoxy resin injection technique. In this experimental study, the primary objective was to evaluate the efficiency of this retrofitting method on masonry walls. The results of this study shows that using epoxy resin injection technique increased the in-plane maximum strength, the ductility, the initial stiffness value, the stiffness, and the energy dissipated during all the loading stages, and decreased the ductility factor.

1 February 2010 in American Journal of Engineering and Applied Sciences
Verified
Journal Article
Open access
PDF file
ASAyad T Saeed
Ayad T Saeed
ASAyad T. Saeed
Ayad T. Saeed
ZLZhang L. Liang
Zhang L. Liang
YYYang Z. Yun
Yang Z. Yun
FZFeras A. Zoubi
Feras A. Zoubi
Oday Asal SalihOday Asal Salih
Oday Asal Salih
Full Model Wind Tunnel Study on the Xia-Zhang Bridge Under Operation Stage

1 January 2011
Verified
Book Chapter
Closed access
PDF file
Oday Asal SalihOday Asal Salih
Oday Asal Salih
LYLi Yingmin
Li Yingmin
MHMohammad Agha Houssam
Mohammad Agha Houssam