To meet the growing demand for the use of environmentally and friendly materials in various applications, many efforts have been done in order to provide lighweighting, biodegradable, and renewable composites leading to a diminution of greenhouse gas emissions. However, they are confronting some challenges that may limit their utilization in industries such as poor interfacial adherence, high moisture absorption, low processing temperature, and impact strength. Several research works have been carried out regarding the mechanical, thermal, and hydric properties of natural fibers reinforced composites to deal with above underlined drawbacks. Actually, based on our analysis, there are two relevant concerns that prevent their integration in other industries such as marine and renewable energy sectors. In this context, the current critical review offers an up to date overview of the factors influencing the properties of the different components of natural fibers composites (fiber, matrix, fiber/matrix interface) as well as their physicochemical, mechanical, thermal and hydric behaviors. Recent works on the mechanical properties of nanobiocomposites based on cellulosic fibers, crystals, and nano-clay fillers are reviewed. The future directions are also discussed to overcome the challenges confronted by these materials, that is, fire resistance and moisture absorption, in order to widespread their utilization especially for wet and fire retardant purposes.
This article examines the degradation mechanisms and mechanical properties of unfilled and montmorillonite-filled bamboo fiber-composites, under long-term water aging (up to 120 days) at room temperature. The main findings show that the water absorption and hydrolysis processes simultaneously occur during aging. The presence of clay fillers (3 wt %) reduces the water absorption content of composites from 18.69% to 15.68% after 120 aging days. However, their moisture absorption rate increases after adding particles. Scanning electron microscope images confirm the development of structural damage induced by the extra-swelling of particles, enabling more water absorption after long-term aging. Interestingly, the unfilled composites lose about 18.7% and 17.94% of their initial tensile strength and modulus after 120 aging days, which is attributed to the swelling/plasticization mechanisms and the chemical degradation at the interface, respectively. However, the tensile strength and modulus of montmorillonite-filled composites drop by 35.78% and 32.47%, respectively. This poor resilience to aging is attributed to the development of microstructural damage. The results of this work provide a clear insight into the long-term mechanical properties of composite materials and shed light on their systematic aging mechanisms, with a view to their application in harsh environments.
In this paper, a finite-element-based model is being introduced and developed, using the Cast3m (CEA, Paris, France) simulation tool, to evaluate the thermo-mechanical behavior of a small-scale test bed. In fact, many studies on thermal behavior of cavities have been carried out in literature. However, none of them took into account the co-existence of all thermal phenomena (conduction, convection, internal/external radiation). The work presented in this paper presents a thermo-mechanical model, which aims to combine, in a holistic way, these phenomena. An experimental validation of the thermal model has been first carried out using an infrared camera and DS18B20 (Maxim Integrated Products, Dallas, TX, USA) numerical sensors. Results are reported and show the accuracy of the proposed model since both numerical and experimental values of heat transmittance fit together. The main objective is to evaluate heat losses through the walls, by means of heat transmittance calculation, and proposing new functional materials that will help in energy harvesting, as a perspective of this work. As for the mechanical study, it was meant to investigate the distribution of the mechanical stress towards the building envelope submitted to its own weight. Results showed that the stress is uniformly distributed on the lateral walls of the structure as well as on the floor.