The objective of this study is to develop a modified asphalt with excellent rheology and workability. Buton rock asphalt (BRA) composite modified warm mix asphalt (BCMWMA) was prepared, and its rheological properties and micromechanisms were investigated. Initially, warm mix asphalt (WMA) was prepared using 3 wt% Sasobit, and then four BCMWMA samples were prepared by blending 5 wt% to 20 wt% of BRA (with 5 wt% intervals). Subsequently, the microscopic morphology and modification mechanism of BCMWMA were analysed by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) tests. Finally, the rheological properties of BCMWMA were examined through conventional properties tests, rotational viscosity tests (RV), dynamic shear rheological tests (DSR) and bending beam rheometer tests (BBR). The results indicate that the BRA and Sasobit composite modifications primarily involve physical modification. BRA improves the high-temperature performance of the modified asphalt but reduces its low-temperature performance. Overall, the BCMWMA exhibits excellent high-temperature performance and workability, contributing to the green and sustainable development of asphalt pavement engineering.

Induction healing technology can effectively repair microcracks in asphalt mixtures and is a promising maintenance technology for asphalt pavements. However, it requires the addition of steel wool fibers to asphalt mixtures and cannot be directly used to repair existing pavements. In order to improve the practicality of the induction healing technology, this article designs a wearing course asphalt mixture with induction healing function that is going to be paved above the existing road surface. The AC-10 asphalt wearing course for induction heating was prepared by adding steel fiber (SF). Analysis of the overall temperature of the surface revealed the unevenness of the temperature distribution, and the healing properties were investigated through protective heating that controlled the maximum temperature of the upper surface. The results show that the addition of SF can improve the high-temperature stability, low-temperature and intermediate-temperature crack resistance, and moisture stability of asphalt wearing courses; however, it has adverse effects on volumetric performance and skid resistance. The heating temperature increases with the increase in SF content, but higher maximum temperature heating rate causes worse heating uniformity and lower healing effect. The maximum heating rate of the sample with 10% SF reaches 3.92 °C/s, while its heating rate at minimum temperature is similar to that of the sample with 6% SF, which is only 0.7 °C/s, indicating the worst heating uniformity. The best healing effect occurs when the maximum temperature of the upper surface reaches 160 °C. The recommended optimal SF content is 6% of the asphalt volume. The asphalt mixture with 6% SF has an appropriate volume performance, moisture stability, and skid resistance; additionally, it has the best high-temperature stability, as well as low-temperature and intermediate-temperature crack resistance. Meanwhile, it also has uniform temperature distribution and efficient healing efficiency.

Capsaicin is an amphiphilic organic molecule containing both a hydrophobic hydrocarbon chain and polar functional groups, giving it the potential to regulate the surface wettability and interfacial interactions of organic materials. To evaluate capsaicin as an interfacial modifier for improving the anti-icing performance of asphalt binder, capsaicin-modified binders with different dosages were prepared and systematically characterized in terms of conventional properties, high- and low-temperature rheological performance, chemical structure, surface wettability, and water-droplet freezing and melting-induced shedding behavior. Capsaicin was incorporated into the asphalt matrix mainly through physical blending and moderately increased the high-temperature stiffness. At an appropriate dosage, the low-temperature creep and stress-relaxation properties were also improved. The addition of capsaicin increased the water contact angle and reduced the total surface free energy, thereby weakening water spreading and water-asphalt interfacial interactions. At temperatures from −5 to −20 °C, all modified binders exhibited delayed complete freezing and facilitated the gravity-driven shedding of frozen droplets during melting at room temperature. Pearson correlation analysis further showed that longer freezing times and shorter ice-shedding times were closely associated with a larger water contact angle and lower surface free energy. Additional validation after long-term aging confirmed that the surface-regulation and freezing-shedding effects of capsaicin remained effective after aging. Considering both binder performance and freezing-shedding behavior, a capsaicin dosage of 12% provided the best overall balance. These findings identify capsaicin as a promising interfacial modifier for the design of anti-icing asphalt materials.

Asphalt pavement wearing courses are directly exposed to hydrodynamic scouring, fuel erosion, freeze–thaw action, and traffic abrasion, leading to accelerated surface deterioration, skid-resistance loss, frequent maintenance, and increased life-cycle carbon emissions. To address these challenges, this study developed an organosilicon-based erosion- and skid-resistant asphalt wearing course (OES-AWC) through a stepwise material design strategy. An organosilicon-treated asphalt concrete matrix was first prepared to improve resistance to moisture damage, fuel erosion, and ice adhesion, and its curing behavior and optimal dosage were determined. A skid-resistant surface layer was then designed by optimizing the anti-skid aggregate type, organosilicon-to-aggregate ratio, and surface texture. Finally, waterborne epoxy resin was introduced to enhance aggregate anchorage, and the integrated OES-AWC was evaluated in terms of abrasion durability, rutting resistance, long-term skid resistance, and life-cycle impacts. The results show that organosilicon treatment forms a hydrophobic siloxane network, which improves the moisture damage, fuel erosion, and anti-icing resistance of asphalt concrete by 22.0–41.1%. Emery aggregates and the optimized surface structure enhance friction stability, while waterborne epoxy resin significantly suppresses aggregate stripping under repeated wheel loading. Compared with conventional asphalt wearing courses, the optimized OES-AWC increased wear durability by 148.1% while maintaining stable skid resistance under prolonged abrasion. Life-cycle assessment further demonstrates that OES-AWC can reduce carbon emissions by 47.2% and overall costs by 25.0%, with a probability exceeding 90% according to the uncertainty analysis. These findings indicate that OES-AWC provides a durable, low-carbon, and cost-effective maintenance strategy for asphalt pavements exposed to complex service environments.