This paper presents a cascaded robust fault-tolerant predictive control (CRFTPC) strategy with integral terminal sliding mode observer (IT-SMO) to achieve high performance speed loop and current loop for permanent magnet synchronous motor (PMSM) drives. The modeling of PMSM considers the disturbance caused by parameter perturbation and permanent magnet demagnetization. With this model, we can derive the optimal control law of the proposed scheme, which avoids the tuning work of the weight factor effectively. This new CRFTPC strategy has a cascaded structure, external loop and internal loop, both implemented with robust fault-tolerant predictive control. In addition, a new integral terminal sliding mode observer is designed to estimate the disturbances, and thus the robustness of the proposed method can be increased significantly. Comparative simulations and experimentations verify that the proposed CRFTPC provides fast dynamic response, static-errorless speed, and current tracking, even with the system disturbance.
In order to study the contribution of each harmonic to the output torque and axial torque of the axial magnetic gear with Halbach permanent magnet arrays (HAMG), torque and axial force calculation formulas of the HAMG are proposed based on the air-gap flux density distribution of the HAMG. Because of the difference of the air-gap flux densities at different radii, two simplified torque and axial force calculation formulas are proposed and compared. To improve the torque capability of the HAMG, parametric analysis of eight dimensional parameters is firstly conducted. By parametric analysis, six parameters such as the inner radius have been found to have obvious impact on the output torque and output torque density of the HAMG. The optimization using Maxwell software is then executed for maximizing the output torque density of the HAMG. The output torque density of the optimized HAMG is improved from 78.1 kNm/m3 to 93.3 kNm/m3 with an increase of 19%. Furthermore, spectrum analysis is also presented to illustrate the significant output torque improvement based on the torque calculation formulas.
The increasing demand for better fruit flavor and eating quality has driven the need for rapid and non-destructive assessment of internal attributes to support fruit grading and precision supply. Visible–near-infrared hyperspectral imaging (VNIR-HSI) provides rich spectral–spatial information for evaluating sweetness in citrus fruit, but its practical use is constrained by high spectral dimensionality, redundancy, and system cost. Here, we propose a reconstruction-assisted, attention-guided band-selection framework for non-destructive prediction of soluble solids content (SSC) in Shimen honey mandarins. The framework integrates spectral–spatial attention, probability-based differentiable band selection, and full-band reconstruction into a unified end-to-end architecture, enabling compact and informative band learning. Using 952 samples, the model selected 56 informative bands from the original 176-band hyperspectral data and achieved competitive SSC prediction on the test set (RMSE = 0.63 °Brix, R2 = 0.80) while maintaining high-fidelity reconstruction of the full-band hyperspectral cube from the compact input (peak signal-to-noise ratio, PSNR = 36.47 dB; structural similarity index, SSIM = 0.89). These findings support the proposed framework as a methodological proof of concept for non-destructive citrus quality evaluation, indicating that substantial spectral compression can be achieved under the current VNIR setting while largely preserving predictive performance. The selected bands may provide candidate spectral regions for future compact citrus-quality sensing systems.