Polyethylene terephthalate (PET) is commonly used in beverage container manufacturing; however, its classification as a single-use plastic significantly contributes to environmental pollution. Improper disposal results in enduring contamination of both terrestrial and marine ecosystems, which poses ecological and health risks. Among the disposal methods, recycling, incineration, and landfilling, only recycling promotes a circular economy by reducing reliance on landfills, alleviating emissions, and conserving fossil resources. This study employs the life cycle assessment (LCA) method to evaluate the environmental impacts of three PET bottle recycling facilities in Taiwan, considering collection, transportation, and processing in the system boundary. It also assesses the effects of raw material composition, comparing transparent, colored, and mixed PET bottles. The results indicate that facilities processing colorless PET have lower environmental damage values (16.6–18.1 mPt·kg−1 of recycled flakes) than those handling colored and oil-trapped PET (25 mPt·kg−1) due to higher energy demands and poly aluminum chloride usage in wastewater treatment. Granulation was identified as a significant environmental hotspot for recycled PET pellets, with a damage value of 35 mPt·kg−1. Integrating renewable energy and recycled PET into PET bottle manufacturing could significantly reduce their environmental impacts. Policy recommendations include adopting renewable energies as the source energy, calibrating the use of chemicals in recycling facilities, and mandating minimum recycled content in PET products to enhance circularity.
Lubricants are essential for machinery, yet their production contributes significantly to climate change. Quantifying their carbon footprint (CF) is necessary to identify emission hotspots and to design effective decarbonization measures across the industry value chain. This study applies Life Cycle Assessment (LCA), following Taiwan’s Product Category Rules (PCR) for lubricants, to quantify and compare the CF of two representative automotive lubricant products and to propose an ecological packaging design, using a Functional Unit (FU) of 1 kg of lubricant. The automotive engine oils studied are designated LB5126777 and LB5168477, both manufactured by a leading Taiwanese manufacturer. We adopted a cradle-to-grave system boundary spanning raw material acquisition and manufacturing through distribution, use, and end-of-life. Results show that LB5126777 emits 1.463 kg CO₂eq/FU and LB5168477 emits 1.449 kg CO₂eq/FU. These emissions are driven overwhelmingly by raw material acquisition (1.364 kg CO₂ eq/FU for LB5126777 and 1.367 kg CO₂eq/FU for LB5168477). For LB5126777, an implemented and verified eco-design intervention that replaced conventional 1-L plastic packaging with 100% recycled high-density polyethylene (rHDPE) achieved a 7.89% reduction in the total carbon footprint while maintaining packaging technical performance. Accordingly, this study recommends reusing recycled materials that do not compromise technical performance, adopting renewable electricity, and optimizing base-oil sourcing as priority decarbonization strategies for automotive lubricant products.