Chien-Hung Kuo

Mr. Chien-Hung Kuo


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 December 2016 in Sustainability
Verified
Journal Article
Open access
PDF file
AHAllen H. Hu
Allen H. Hu
LHLance Hongwei Huang
Lance Hongwei Huang
SLSylvia Lou
Sylvia Lou
CKChien-Hung Kuo
Chien-Hung Kuo
CHChing-Yao Huang
Ching-Yao Huang
HHHwen-Fen Hong
Hwen-Fen Hong
Depleting fossil fuel sources and worsening global warming are two of the most serious world problems. Many renewable energy technologies are continuously being developed to overcome these challenges. Among these technologies, high-concentration photovoltaics (HCPV) is a promising technology that reduces the use of expensive photovoltaic materials to achieve highly efficient energy conversion. This reduction process is achieved by adopting concentrating and tracking technologies. This study intends to understand and assess the carbon footprint and energy payback time (EPBT) of HCPV modules during their entire life cycles. The social benefit of carbon reduction is also evaluated as another indicator to assess the energy alternatives. An HCPV module and a tracker from the Institute of Nuclear Energy Research (INER) were applied, and SimaPro 8.0.2 was used for the assessment. The functional unit used in this study was 1 kWh, which is produced by HCPV, and inventory data was sourced from Ecoinvent 3.0 and the Taiwan carbon footprint calculation database. The carbon footprint, EPBT, and social benefit of carbon reduction were evaluated as 107.69 g CO2eq/kWh, 2.61 years, and 0.022 USD/kWh, respectively. Direct normal irradiation (DNI), life expectancy, and the degradation rate of HCPV system were subjected to sensitivity analysis. Results show that the influence of lifetime assumption under a low DNI value is greater than those under high DNI values. Degradation rate is also another important factor when assessing the carbon footprint of HCPV under a low DNI value and a long lifetime assumption. The findings of this study can provide several insights for the development of the Taiwanese solar industry.

28 May 2017 in Sustainability
Verified
Journal Article
Open access
PDF file
YWYi-Xuan Wang
Yi-Xuan Wang
CKChien-Hung Kuo
Chien-Hung Kuo
RSRui Song
Rui Song
AHAllen H. Hu
Allen H. Hu
SZShushen Zhang
Shushen Zhang
The pursuit of sustainable resource use by manufacturing companies is driven by resource scarcity, environmental awareness, and cost savings potentials. To address these issues, Material Flow Cost Accounting (MFCA) has been developed and applied as an effective environmental management tool. Within MFCA’s general allocation, the accounts of products and losses are overrated by weight or volume. However, such a method is incompatible with Printed Circuit Board (PCB) manufacturing because of industry characteristics in which primary inputs and products are measured by area. Based on MFCA, this case study systematically established several linear cost calculation models along the production process for capturing the actual waste flows as well as performing cost-benefit analysis. The recognition of previously ignored losses offered the incentive to find appropriate indicators to conduct cost-benefit analysis on hotspots for losses. Loss identification and analysis indicated that machining and wiring are the necessities and priorities of process optimization for resource efficiency improvement measures. Therefore, this research could not only advance the achievement of a profitable and sustainable production while improving resource efficiency at the source but could also provide support for decision making in PCB manufacturing.

16 May 2025 in Recycling
Verified
Journal Article
Open access
PDF file
AHAllen H. Hu
Allen H. Hu
CTChih-Yu Ting
Chih-Yu Ting
AOAli OUATTARA
Ali OUATTARA
WCWei-Tse Chen
Wei-Tse Chen
CKChien-Hung Kuo
Chien-Hung Kuo
Polyethylene terephthalate (PET) is commonly used in beverage container manufacturing; however, its classification as a single-use plastic significantly contributes to environmental pollution. Improper disposal results in enduring contamination of both terrestrial and marine ecosystems, which poses ecological and health risks. Among the disposal methods, recycling, incineration, and landfilling, only recycling promotes a circular economy by reducing reliance on landfills, alleviating emissions, and conserving fossil resources. This study employs the life cycle assessment (LCA) method to evaluate the environmental impacts of three PET bottle recycling facilities in Taiwan, considering collection, transportation, and processing in the system boundary. It also assesses the effects of raw material composition, comparing transparent, colored, and mixed PET bottles. The results indicate that facilities processing colorless PET have lower environmental damage values (16.6–18.1 mPt·kg−1 of recycled flakes) than those handling colored and oil-trapped PET (25 mPt·kg−1) due to higher energy demands and poly aluminum chloride usage in wastewater treatment. Granulation was identified as a significant environmental hotspot for recycled PET pellets, with a damage value of 35 mPt·kg−1. Integrating renewable energy and recycled PET into PET bottle manufacturing could significantly reduce their environmental impacts. Policy recommendations include adopting renewable energies as the source energy, calibrating the use of chemicals in recycling facilities, and mandating minimum recycled content in PET products to enhance circularity.

27 September 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
AOAli OUATTARA
Ali OUATTARA
RAResita Azhaari
Resita Azhaari
AHAllen H. Hu
Allen H. Hu
CKChien-Hung Kuo
Chien-Hung Kuo
LHLance Hongwei Huang
Lance Hongwei Huang
Access to clean and safe water is essential to sustain human life. With the growth of the world population, the demand for clean water is also increasing. Water Treatment Plants (WTPs) are among the highest electricity consumers, thus causing damage to the environment and human health by producing solid waste and sludge as by-products, along with air pollution and noise. With the fourth highest population in the world, Indonesia faces a high demand for clean water. The country has pledged to reach net zero by 2060 or sooner, requiring effort in all sectors of the economy. Taiwan is relatively small compared to Indonesia but has a higher average clean water supply per capita than Indonesia. This study assessed and compared the Carbon Footprint (CF) emitted from four WTPs in Indonesia and Taiwan. A Life Cycle Assessment (LCA) was used, employing a cradle to gate as the methodology. The results showed that the Indonesian WTPs emit more CF than the Taiwanese ones. Electricity consumption from the intake operation and screening process mainly contributes to the CF in most of the studied WTPs. While chemical usage is related to the amount of treated water and the water quality regulations, their consumption has more impact on ecosystem services in Taiwan. Using both renewable energy and good chemical management will be a better solution to lessen the environmental impact of all of these WTPs.

22 May 2026 in Energies
Verified
Journal Article
Open access
PDF file
YSYung-Shuen Shen
Yung-Shuen Shen
GHGuan-Ting Huang
Guan-Ting Huang
LHLance Hongwei Huang
Lance Hongwei Huang
CKChien-Hung Kuo
Chien-Hung Kuo
AOAli OUATTARA
Ali OUATTARA
AHAllen H. Hu
Allen H. Hu
To address transportation-related emissions, Taiwan’s 2022 net-zero strategy sets targets to increase the adoption of battery electric vehicles (BEVs). However, current policy frameworks insufficiently consider the technological diversity of low-emission alternatives, particularly hydrogen fuel cell electric vehicles (FCEVs). This study integrates a well-to-wheel life cycle assessment (LCA) with system dynamics modeling to evaluate and compare the environmental and health impacts of transitioning from internal combustion engine vehicles (ICEVs) to BEVs and hydrogen FCEVs. The framework incorporates LCA-based carbon emissions and disability-adjusted life years (DALYs) into a dynamic population simulation. Results show that, while DALY effects on life expectancy and population growth are limited, low-carbon vehicle adoption substantially reduces environmental burdens and helps moderate population decline. Projections to 2050 highlight significant emission-reduction potential, with hydrogen FCEV carbon emissions decreasing as renewable energy in hydrogen production increases. Adoption of green hydrogen could achieve a net-negative carbon balance for hydrogen FCEVs by 2049, positioning them as a sustainable long-term alternative to BEVs.