Shizheng Yang

Dr. Shizheng Yang

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 December 2017 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
BLBin Lu
Bin Lu
HLHongliang Lv
Hongliang Lv
YZYuming Zhang
Yuming Zhang
YZYimen Zhang
Yimen Zhang
XCXiaoran Cui
Xiaoran Cui
CLChen Liu
Chen Liu
Based on an analytical surface potential and a simple mathematical approximation for the source depletion width, a physics-based capacitance model with closed form for silicon double-gate tunnel field-effect transistors (TFETs) is developed. Good agreements between the proposed model and the numerical simulations have been achieved, which reveal that the tunneling carriers from source have negligible contribution to the channel charges and the gate capacitance can be almost acted as the gate-drain capacitance, which is quite different from that of MOSFETs. This model without involving any iterative process is more SPICE friendly for circuit simulations compared with the table-lookup approach and would be helpful for developing the transient performance of TFET-based circuits.

30 January 2020 in IEEE Access
Verified
Journal Article
Open access
SYShizheng Yang
Shizheng Yang
HLHongliang Lv
Hongliang Lv
BLBin Lu
Bin Lu
SYSilu Yan
Silu Yan
YZYuming Zhang
Yuming Zhang
A novel planar architecture is proposed for tunnel field-effect transistors (TFETs). The advantages of this architecture are exhibited, taking the InAs/Si TFET as an example, and the effects of different device parameters are analyzed in detail. Owing to the gate field being parallel to the tunneling interface, the gate control is enhanced, and a better electrical performance is obtained. Moreover, different from a conventional TFET, in which the effective tunneling area and current can hardly be modulated by the gate length, in our proposed device, the effective tunneling area and current can be adjusted depending on the actual requirements of circuit design, which increases the flexibility of TFET-based circuit design. In addition, the device architecture can also be extended to other materials, such as Ge/Si and GaSb/InAs, and thus be used for both n-type and p-type devices. The results show that the complementary digital inverter structure with InAs/Si as the n-type TFET and Ge/Si as the p-type TFET would be helpful for future ultralow power applications. This proposed structure without any complicated fabrication steps shows better compatibility with CMOS technology compared to other TFETs with heterojunction and structural innovations presented in theoretical works.

25 November 2021 in Crystals
Verified
Journal Article
Open access
PDF file
XGXiaotong Guo
Xiaotong Guo
ZLZeshan Liang
Zeshan Liang
XNXiaobin Nan
Xiaobin Nan
CJChunxu Jiang
Chunxu Jiang
YLYong Li
Yong Li
SYShizheng Yang
Shizheng Yang
Turbine blades in aircraft engines may encounter overheating and suffer serious creep property degradation. In this study, the thermal cycling creep experiments were conducted on K465 superalloy under (900 °C/30 min–1100 °C/3 min)/50 MPa, (900 °C/30 min–1150 °C/3 min)/50 MPa and (1000 °C/30 min–1150 °C/3 min)/50 MPa. The investigated thermal cycling creep properties were dramatically degraded, and increasing the overheating temperatures significantly decreased the thermal cycling creep life. The secondary γ′ precipitates obviously dissolved and the area fraction decreased to around 35.2% under (900 °C/30 min–1150 °C/3 min)/50 MPa and (1000 °C/30 min–1150 °C/3 min)/50 MPa, which was almost half that after the standard solution treatment. The decline of the thermal cycling creep properties was mainly due to the significant dissolution of γ′ precipitates. The creep holes/cracks were mainly distributed at the M6C carbides and γ/γ′ eutectics interfaces, M6C carbides and γ′ film interfaces in the grain boundaries, and resulted in the final intergranular fracture.

4 December 2019 in Coatings
Verified
Journal Article
Open access
PDF file
SYShizheng Yang
Shizheng Yang
HLHongliang Lv
Hongliang Lv
LALikun Ai
Likun Ai
FTFangkun Tian
Fangkun Tian
SYSilu Yan
Silu Yan
YZYuming Zhang
Yuming Zhang
InP layers grown on Si (001) were achieved by the two-step growth method using gas source molecular beam epitaxy. The effects of growth temperature of nucleation layer on InP/Si epitaxial growth were investigated systematically. Cross-section morphology, surface morphology and crystal quality were characterized by scanning electron microscope images, atomic force microscopy images, high-resolution X-ray diffraction (XRD), rocking curves and reciprocal space maps. The InP/Si interface and surface became smoother and the XRD peak intensity was stronger with the nucleation layer grown at 350 °C. The Results show that the growth temperature of InP nucleation layer can significantly affect the growth process of InP film, and the optimal temperature of InP nucleation layer is required to realize a high-quality wafer-level InP layers on Si (001).

26 March 2022 in Crystals
Verified
Journal Article
Open access
PDF file
SYSilu Yan
Silu Yan
HLHongliang Lv
Hongliang Lv
YZYuming Zhang
Yuming Zhang
SYShizheng Yang
Shizheng Yang
InP nucleation layers with different thicknesses were grown on Si(001) substrates by gas-source molecular beam epitaxy (GSMBE), and the two-step growth technique was used to overcome the large lattice mismatch (8%) between the InP nucleation layer and Si substrate. The surface morphology and microstructure were investigated by using an atomic force microscope (AFM) and transmission electron microscopy (TEM). High-resolution X-ray diffraction (HR-XRD) measurements were carried out to characterize the crystal quality. It was found that a too thin nucleation layer will lead to an uneven distribution of atoms on the surface, resulting in a poor crystalline quality of the InP epitaxial layer. The thicker the low-temperature nucleation layer is, the better the crystallization quality of the InP high-temperature layer will be.

1 February 2019 in Chinese Physics B
Verified
Journal Article
Closed access
JZJing Zhang
Jing Zhang
HLHongliang Lv
Hongliang Lv
HNHaiqiao Ni
Haiqiao Ni
SYShizheng Yang
Shizheng Yang
XCXiaoran Cui
Xiaoran Cui
YZYuming Zhang
Yuming Zhang