Barbu LENUTA Nina

Dr. Barbu LENUTA Nina


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
FNFlorentina Niculescu
Florentina Niculescu
MSMariana Mirela Stanescu
Mariana Mirela Stanescu
GIGheorghe Iacob
Gheorghe Iacob
AOAdrian Emanuel Onici
Adrian Emanuel Onici
BNBarbu LENUTA Nina
Barbu LENUTA Nina
This article analyzes in detail the structural, thermal and mechanical properties of the Ni₅₄Cr₂₈Mo₈Nb₅Ta₅ alloy, as well identify potential applications in areas where exceptional high-temperature performance is required — such as gas turbines, nuclear reactors or aeronautical engine components. Obtaining a very good correlation between the experimental and fitted profiles, as well as the low values of the error parameters (R-factors), confirms the accuracy of the structural model and the validity of the phases identified following the XRD analysis. The study also aims to highlight the relationship between chemical composition, microstructure and mechanical behavior, providing a basis for optimizing heat treatments and manufacturing processes of this advanced superalloy.

9 August 2026 in Metals
Verified
Journal Article
Open access
PDF file
FNFlorentina Niculescu
Florentina Niculescu
MSMariana Mirela Stanescu
Mariana Mirela Stanescu
GIGheorghe Iacob
Gheorghe Iacob
AOAdrian Emanuel Onici
Adrian Emanuel Onici
BNBarbu LENUTA Nina
Barbu LENUTA Nina
A multicomponent Ni54Cr28Mo8Nb5Ta5 nickel-based superalloy was produced by vacuum induction melting followed by homogenization, hot forging, solution treatment, and aging to investigate its microstructural and mechanical behavior. The X Ray Fluorescence (XRF) analysis confirmed excellent agreement between the nominal and experimental chemical compositions. The X Ray Diffraction(XRD) combined with Rietveld refinement revealed a microstructure dominated by three closely related to face-centered cubic (FCC) (A1) solid-solution regions with slightly different lattice parameters, indicating local compositional variations. The Scanning Electron Microscopy(SEM)/Energy Dispersive Spectroscopy (EDS) observations showed a generally homogeneous elemental distribution, while optical and electron microscopy identified a dendritic microstructure with elongated interdendritic constituents enriched in refractory elements. Mechanical characterization yielded an average hardness of 497 HV0.5, a compressive strength of approximately 1950 MPa, and room-temperature yield and ultimate tensile strengths of 1050 MPa and 1320 MPa, respectively. Tensile strength gradually decreased with increasing temperature up to 900 °C, while ductility increased from 16% to 25% total elongation. The results indicate that the alloy develops a stable FCC matrix primarily strengthened by solid-solution hardening, with the measured mechanical performance suggesting an additional contribution from precipitation hardening. This study provides an experimental baseline for the development and optimization of conventionally processed Ni–Cr–Mo–Nb–Ta superalloys for high-temperature applications.