The equivalent circuit of the transformer is an abstract model that describes the real behavior of the transformer. Today, several equivalent circuits are known. The most well-known are the T-equivalent circuit and the $\Pi$ -equivalent circuit that derives from it. Parameters are typically estimated by nameplate nominal parameters, short-circuit, open-circuit measurements, etc. In this procedure, the simplifications used introduce inaccuracies into the estimate. This paper describes an iterative method that minimizes inaccuracy.
Modern energy systems require efficient power management, making multi-active bridge (MAB) converters ideal for electric vehicle (EV) charging and DC microgrids. However, higher port counts lead to magnetic coupling and non-linear dynamics, complicating independent control. This paper proposes a generalised power flow decoupling strategy for a five-port modular multi-active bridge (MMAB) converter using the Newton–Raphson (NR) method. Unlike traditional reduced-order models, a current-based model is employed to maintain modularity. A key contribution is the integration of the Moore–Penrose pseudoinverse into the NR solver to mitigate Jacobian singularities and ensure numerical stability. The algorithm is implemented on a dual-core central processing unit (CPU), achieving a deterministic 40 μs execution time. Furthermore, this study identifies performance degradation caused by parasitic inductances in the modular AC bus and proposes an optimised design using magnetic flux cancellation. Modelling precision is further refined through offline fast Fourier transform (FFT)-based parameter identification. Experimental validation on a five-port MMAB prototype confirms that the proposed method provides superior steady-state accuracy and robust dynamic decoupling during rapid transient load transitions.
This paper presents the mathematical modeling, numerical implementation, and experimental validation of a decoupling control algorithm for a five-port multiport modular active bridge (MMAB) converter in DC microgrid applications. Based on an analytically derived generalized state-space framework of the MMAB topology, a matrix-based method for suppressing non-linear mutual cross-couplings among individual ports is proposed. The study addresses parametric uncertainties within the system matrix caused by parasitic bus inductances; by formulating a linear system of equations solved via the numerical least-squares method, the equivalent parameter identification error was reduced from over 18% to a valid threshold. The decoupling performance and dynamic responsiveness of the closed-loop system were experimentally verified on a dual-core TMS320F28379D digital signal processor. The experimental results demonstrate that the proposed algorithm effectively isolates transient step-load perturbations, maintaining voltage stability on adjacent undisturbed ports within a strict deviation of less than and achieving a recovery time below 5 ms. Furthermore, the real-time execution of the online Jacobian matrix inversion via the Newton–Raphson method confirms the computational feasibility and convergence of the iterative approach under tight sampling periods. The obtained results provide a robust, experimentally validated foundation for advanced algebraic and numerical control strategies in high-stability multiport power conversion systems.