Daniela Stoeva

Ms. Daniela Stoeva


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2025 in Coatings
Verified
Journal Article
Open access
PDF file
Georgi KotlarskiGeorgi Kotlarski
Georgi Kotlarski
DSDaniela Stoeva
Daniela Stoeva
DDDimitar Dechev
Dimitar Dechev
NINikolay Ivanov
Nikolay Ivanov
Maria OrmanovaMaria Ormanova
Maria Ormanova
S. ValkovS. Valkov
S. Valkov
During the last few years, the requirements for highly efficient, sustainable, and versatile materials in modern biomedicine, aircraft and aerospace industries, automotive production, and electronic and electrical engineering applications have increased. This has led to the development of new and innovative methods for material modification and optimization. This can be achieved in many different ways, but one such approach is the application of surface thin films. They can be conductive (metallic), semi-conductive (metal-ceramic), or isolating (polymeric). Special emphasis is placed on applying semi-conductive thin films due to their unique properties, be it electrical, chemical, mechanical, or other. The particular thin films of interest are composite ones of the type of transition metal oxide (TMO) and transition metal nitride (TMN), due to their widespread configurations and applications. Regardless of the countless number of studies regarding the application of such films in the aforementioned industrial fields, some further possible investigations are necessary to find optimal solutions for modern problems in this topic. One such problem is the possibility of characterization of the applied thin films, not via textbook approaches, but through a simple, modern solution using their electrical properties. This can be achieved on the basis of measuring the films’ electrical impedance, since all different semi-conductive materials have different impedance values. However, this is a huge practical work that necessitates the collection of a large pool of data and needs to be based on well-established methods for both characterization and formation of the films. A thorough review on the topic of applying thin films using physical vapor deposition techniques (PVD) in the field of different modern applications, and the current results of such investigations are presented. Furthermore, current research regarding the possible methods for applying such films, and the specifics behind them, need to be summarized. Due to this, in the present work, the specifics of applying thin films using PVD methods and their expected structure and properties were evaluated. Special emphasis was paid to the electrical impedance spectroscopy (EIS) method, which is typically used for the investigation and characterization of electrical systems. This method has increased in popularity over the last few years, and its applicability in the characterization of electrical systems that include thin films formed using PVD methods was proven many times over. However, a still lingering question is the applicability of this method for backwards engineering of thin films. Currently, the EIS method is used in combination with traditional techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and others. There is, however, a potential to predict the structure and properties of thin films using purely a combination of EIS measurements and complex theoretical models. The current progress in the development of the EIS measurement method was described in the present work, and the trend is such that new theoretical models and new practical testing knowledge was obtained that help implement the method in the field of thin films characterization. Regardless of this progress, much more future work was found to be necessary, in particular, practical measurements (real data) of a large variety of films, in order to build the composition–structure–properties relationship.

1 March 2026 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
DSDaniela Stoeva
Daniela Stoeva
DDD Dechev
D Dechev
GKG Kotlarski
G Kotlarski
NIN Ivanov
N Ivanov
MOM Ormanova
M Ormanova
IMI Marinova
I Marinova
Tungsten nitride (WN) coatings were deposited on Al substrates by reactive magnetron sputtering to study their structural and electrical behaviours. The films exhibited stable nitride phases without detectable Al–W intermetallics. By varying deposition time from 15 to 45 min, the coating thickness increased from ∼0.6 μm to ∼1.1 μm, while AFM analysis showed increase in surface roughness. Electrical contact resistance (ECR) measurements revealed significant improvement: coated samples showed 0.439–0.532 Ω compared to 0.861 Ω for bare Al. These results demonstrate that WN coatings enhance both stability and conductivity, highlighting their potential for electronic and protective applications.

3 January 2026 in Journal of Chemical Technology and Metallurgy
Verified
Journal Article
Open access
DSDaniela Stoeva
Daniela Stoeva
Georgi KotlarskiGeorgi Kotlarski
Georgi Kotlarski
DDDimitar Dechev
Dimitar Dechev
NINikolay Ivanov
Nikolay Ivanov
S. ValkovS. Valkov
S. Valkov
Iliana MarinovaIliana Marinova
Iliana Marinova
In this study, titanium oxide thin films were synthesized on Al substrates by the direct current reactive magnetron sputtering technique. During the experiments, a pure Ti interlayer on aluminum substrates was deposited. Part of the formed samples were heated to a temperature of 180°C for 120 min. The TiO2 thin films were deposited on heated and unheated Al substrates with Ti interlayer. Important crystallographic parameters of samples, like phase composition, formation of preferred crystallographic orientation, and lattice parameters were studied using X-ray diffraction analysis. Other surface characteristics, such as surface roughness, and distribution of the measured heights were determined using Atomic Force Microscopy. Electrical impedance spectroscopy was used to determine the electricalcharacteristics of specimens. The results obtained for the electrical properties of the modified surfaces were discussed in relation to the investigated structure of the samples. The results showed that the applied preliminary heating of the deposited Ti interlayer on the Al substrate significantly influenced the electrical impedance of the Ti/TiO2 coating.

30 July 2026 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
Valentin MateevValentin Mateev
Valentin Mateev
Georgi KotlarskiGeorgi Kotlarski
Georgi Kotlarski
Iliana MarinovaIliana Marinova
Iliana Marinova
S. ValkovS. Valkov
S. Valkov
Maria OrmanovaMaria Ormanova
Maria Ormanova
DSDaniela Stoeva
Daniela Stoeva
This paper is dedicated to the determination of the electrical properties of a wire arc additively manufactured (WAAM) aluminum alloy component. Statistical processing of the electrical properties and hollow micro-interlayer zones of the WAAM sample made of ER4043 aluminum alloy is performed. The eddy current electrical conductivity measurement method is employed for WAAM 3D-printed sample surface properties mapping. Measured data on electrical conductivity are estimated depending on the 3D printing axis directions and the lift-off distance from the sample surface. The 3D standard deviation is calculated for property anisotropy correlation. These data can be used for improved additive manufacturing control for enhanced electrical conductivity of aluminum WAAM samples as well as for numerical modeling of the properties of such samples.

3 September 2026 in Coatings
Verified
Journal Article
Open access
PDF file
DSDaniela Stoeva
Daniela Stoeva
Georgi KotlarskiGeorgi Kotlarski
Georgi Kotlarski
DDDimitar Dechev
Dimitar Dechev
ELEdmon Lazarov
Edmon Lazarov
NINikolay Ivanov
Nikolay Ivanov
Maria OrmanovaMaria Ormanova
Maria Ormanova
Tungsten nitride (WN) coatings were deposited on copper substrates by reactive direct current magnetron sputtering using deposition times of 15, 30, 45, and 60 min. The influence of deposition time on the structural, morphological, and electrical properties of the coatings was systematically investigated. WN coatings with thicknesses increasing from approximately 0.45 to 1.60 μm were obtained as the deposition time increased. Energy-dispersive X-ray spectroscopy confirmed the presence of W and N in the coating region, while X-ray diffraction showed diffraction features consistent with a crystalline hexagonal δ-WN phase with a dominant {110} preferred orientation for all samples. Increasing deposition time was accompanied by a decrease in the lattice parameter from 2.934 to 2.922 Å and in the relative lattice strain from 0.014 to 0.010. Atomic force microscopy showed that coatings deposited for 15 and 30 min reduced the initial surface roughness, whereas longer deposition times promoted the development of larger surface features and increased roughness. Electrical impedance measurements showed a strong frequency-dependent response. Electrical impedance exhibited a pronounced frequency dependence. At the 1000 kHz range, the impedance magnitude was approximately 0.54 Ω, 0.43 Ω, 0.45 Ω, and 0.43 Ω for coatings deposited for 15, 30, 45, and 60 min, respectively. The electrical response was correlated with the evolution of lattice strain and structural characteristics, although the present data not establish a unique charge-transport mechanism. These findings indicate that deposition time is an important parameter for tailoring the structural and electrical response of WN coatings for conductive and protective applications.