Biosurfactants are surface-active agents produced by microorganisms that have higher efficiency and stability, lower toxicity and higher biocompatibility and biodegradability than chemical surfactants. Despite its properties and potential application in a wide range of environmental and industrial processes, biosurfactants are still not cost-competitive when compared to their synthetic counterparts. Cost effective technologies and renewable raw substrates as agro-industrial and regional waste from northeast of Brazil as cassava flour wastewater, supplemented with lactose and corn oil are mainly the chemically media for growing microorganism and in turn the production of the biosurfactant of quality. This study aimed to obtained biosurfactant by Serratia marcescens UCP 1549 containing cassava flour wastewater (CWW), by application of a full-factorial design, as sustainable practices in puts the production process in promising formulation medium. The characterization of the biomolecule was carried out, as well as the determination of its stability and toxicity for cabbage seeds. In addition, its ability to stimulate seed germination for agriculture application and oil spill bioremediation were investigated. Serratia marcescens showed higher reduction of surface tension (25.92 mN/m) in the new medium containing 0.2% lactose, 6% cassava flour wastewater and 5% corn waste oil, after 72 h of fermentation at 28 °C and 150 rpm. The substrate cassava flour wastewater showed a promising source of nutrients for biosurfactant production. The isolate biosurfactant exhibited a CMC of 1.5% (w/v) and showed an anionic and polymeric structure, confirmed by infrared spectra. The biomolecule demonstrated high stability under different temperatures, salinity and pH values and non-toxicity against to cabbage seeds. Thus, exploring biosurfactant their potential role in seeds germinations and the promotion and agricultural applications was investigated. In addition, the effectiveness of biosurfactant for removal burned motor oil adsorbed in sand was verified. The use of medium containing CWW not only reduces the cost of process of biosurfactant production, but also the environmental pollution due to the inappropriate disposal of this residue. This fact, added to the high stability and non-toxicity of the biosurfactant produced by S. marcescens UCP 1549, confirms its high environmental compatibility, make it a sustainable biocompound that can be replace chemical surfactants in diverse industries. In addition, the effectiveness of biosurfactant for stimulate seed germination and removing burned motor oil from sand, suggests its suitability for agriculture and bioremediation applications.

This research aims to study the production of chitosan from shrimp shell (Litopenaeus vannamei) of waste origin using two chemical methodologies involving demineralization, deproteinization, and the degree of deacetylation. The evaluation of the quality of chitosan from waste shrimp shells includes parameters for the yield, physical chemistry characteristics by infrared spectroscopy (FT-IR), the degree of deacetylation, and antibacterial activity. The results showed (by Method 1) extraction yields for chitin of 33% and for chitosan of 49% and a 76% degree of deacetylation. Chitosan obtained by Method 2 was more efficient: chitin (36%) and chitosan (63%), with a high degree of deacetylation (81.7%). The antibacterial activity was tested against Gram-negative bacteria (Stenotrophomonas maltophiliaandEnterobacter cloacae) and Gram-positiveBacillus subtilisand the Minimum Inhibitory Concentrations (MIC) and the Minimum Bactericidal Concentration (MBC) were determined. Method 2 showed that extracted chitosan has good antimicrobial potential against Gram-positive and Gram-negative bacteria and that the process is viable.

Agriculture plays a major role on society, especially in developing countries which rely on commodity exportation markets. To maintain high crop productivity, the use of agrochemicals was once employed as the main strategy, which in turn affected soil, water, and human health. In order to aid this issue, identifying some alternatives, such as the implementation of biofertilizers and inoculants as bioinputs in modern agriculture, are imperative to improve ecosystem quality. Among these bioinputs, a few bioproducts have shown good performances, such as phytohormones (e.g., auxins and giberellins), biosurfactants, and other enzymes; thus, it is extremely important to assure the quality and feasibility of their production in biorefinery scenarios. These bioproducts can be synthesized through fermentation processes through utilizing plant biomasses and agricultural byproducts as carbon sources. In this sense, to increase the tecno-economical availability of these processes, the implementation of solid-state fermentation (SSF) has shown great potential due to its ease of operation and cost-attractiveness. Therefore, this study aims to describe the main substrates used in SSF systems for the production of potential bioinputs; their associated operation hurdles, parameters, and conditions selection; the most suitable microorganisms; and the underlying mechanisms of these molecules in soil dynamics. Within this context, this study is expected to contribute to the development of new processes in modern biorefineries and to the mitigation of environmental impacts.

A biosurfactant was produced from Cunninghamella echinulata using sustainable technology for cleaning and degreasing of cotton fabric impregnated with burned motor oil. The surface tension was 32.4 mN/m on a medium containing instant noodle waste (2%), corn steep liquor (2%), and postfrying oil (0.5%) with a carbon/nitrogen ratio of 30 : 1, yield of 6.0 g·L⁻¹, emulsifier index of 81.4%, and dispersant property of 32.15 cm². The biosurfactant produced is a glycolipid constituted by carbohydrate (47.7%) and lipids (50.0%). The structure was confirmed by GC‐MS (stearic acid in predominance with mass of 298 m/z), FTIR spectroscopy (polysaccharides in bands between 1025 and 1152 cm⁻¹ and fatty acids in bands between 2057 and 3100 cm⁻¹), 1H NMR, and 13C NMR spectrum (carbohydrates in signal of 4.38 ppm and 77.0 ppm). The properties of cleaning and degreasing of burned engine oil in cotton fabric by biosurfactant of C. echinulata was evidenced by removal of 86% of oil. After use of the biosurfactant, the fibers were not damaged, which is important for structural integrity of cotton fabric after the wash. In addition, the biosurfactant did not show toxic effect. This study suggests that the biosurfactant from C. echinulata can be used in formulation of textile detergents, in particular for removal of hydrophobic residues from the automobile industry.

In this study, chitin and chitosan were extracted from Litopenaeus vannamei waste using chemical and microwave methods. Shrimp waste was cleaned, dried and ground sieved to 16, 32 and 60 mesh, and the samples were depigmented, demineralized, and deproteinized. Then, the chitin was submitted to a deacetylation process by 45% NaOH solution under microwave irradiation at 600w, for intermittent 15 min or using 5 pulses of 5 minutes. The study showed that the effectiveness of the particle size of 32 mesh and 6 pulses of 5 min to deacetylation with 92% of degree and chitosan yield (52.2%). The polymer chitosan showed higher antimicrobial activity against to Staphylococcus aureus, Escherichia coli, Salmonella enterica and the yeast Candida sp., respectively. The results indicated the feasibility of the microwave radiation as an attractive method to recover chitin and chitosan from shrimp wastes.

Almost all oleaginous microorganisms are available for biodiesel production, and for the mechanism of oil accumulation, which is what makes a microbial approach economically competitive. This study investigated the potential that the yeast Candida lipolytica UCP0988, in an anamorphous state, has to produce simultaneously a bioemulsifier and to accumulate lipids using inexpensive and alternative substrates. Cultivation was carried out using waste soybean oil and corn steep liquor in accordance with 2² experimental designs with 1% inoculums (10⁷ cells/mL). The bioemulsifier was produced in the cell-free metabolic liquid in the late exponential phase (96 h), at Assay 4 (corn steep liquor 5% and waste soybean oil 8%), with 6.704 UEA, IE₂₄ of 96.66%, and showed an anionic profile. The emulsion formed consisted of compact small and stable droplets (size 0.2–5 µm), stable at all temperatures, at pH 2 and 4, and 2% salinity, and showed an ability to remove 93.74% of diesel oil from sand. The displacement oil (ODA) showed 45.34 cm² of dispersion (central point of the factorial design). The biomass obtained from Assay 4 was able to accumulate lipids of 0.425 g/g biomass (corresponding to 42.5%), which consisted of Palmitic acid (28.4%), Stearic acid (7.7%), Oleic acid (42.8%), Linoleic acid (19.0%), and γ-Linolenic acid (2.1%). The results showed the ability of C. lipopytica to produce both bioemulsifier and biodiesel using the metabolic conversion of waste soybean oil and corn steep liquor, which are economic renewable sources.