Ahmed Salah Elkholy

Dr. Ahmed Salah Elkholy

Chemistry Department, Faculty of Science, Al-Azhar University, Cairo, Al Qāhirah, Egypt
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Ahmed Salah ElkholyAhmed Salah Elkholy
Ahmed Salah Elkholy
MYMohamed Saber Yahia
Mohamed Saber Yahia
MEMohamed Abdelsamei Elnwawy
Mohamed Abdelsamei Elnwawy
HGHosny Anwar Gomaa
Hosny Anwar Gomaa
AEAhmed Shafek Elzaref
Ahmed Shafek Elzaref
The present study reports the feasibility of the synthesis of a novel porous composite adsorbent, prepared from olive stone activated carbon (OS400) and garnet (GA) mineral impregnations (referred to as OSMG). This composite (OSMG) was applied for its ability to adsorb a macromolecular organic dye. The composite’s structural characteristics were evaluated using various techniques such as Brunauer–Emmett–Teller (BET), Scanning Electron Microscopy equipped with Energy Dispersive X-ray spectroscopy (SEM–EDX), X-ray diffraction (XRD), and a Fourier transform infrared spectrometer (FT-IR). The specific surface area of the garnet (GA), (OS400), and (OSMG) were found to be 5.157 mg⋅g−1, 1489.598 mg⋅g−1, and 546.392 mg⋅g−1, respectively. The specific surface area of the new composite (OSMG) was promoted to enhance the adsorption of methylene blue (MB). Experiments were conducted under various conditions, including contact time, initial dye concentration, adsorbent dosage, pH, and temperatures. Data from these experiments were analyzed using several adsorption models including Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R). The results indicated that, the adsorption fit best with the Freundlich model and that the adsorption process followed a pseudo-second-order kinetic mechanism. Additionally, the thermodynamic analysis indicated the adsorption of MB onto garnet(GA) adsorbents is endothermic, while the sorption onto (OS400) and (OSMG) is an exothermic and non-spontaneous process. The OSMG composite can be used for at least five cycles without significant loss of adsorptive performance, and can easily be separated from the water after treatment.

3 June 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
OEOmnia El-Shamy
Omnia El-Shamy
HSHanaa Selim
Hanaa Selim
Ahmed Salah ElkholyAhmed Salah Elkholy
Ahmed Salah Elkholy
RKRasha S. Kamal
Rasha S. Kamal
NSNashwa M. Saleh
Nashwa M. Saleh
NENour E. A. Abd El-Sattar
Nour E. A. Abd El-Sattar
Photocatalysis is a promising technique to reduce hazardous organic pollutants using semiconductors under visible light. However, previous studies have been concerned with the behavior of silver phosphate (Ag3PO4) as n-type semiconductors, and the problem of their instability is still under investigation. Herein, 4,4′-(((oxalylbis(azanediyl)) bis(carbonothioyl)) bis(azanediyl)) dibenzoic acid is synthesized by green method and used to enhance the photocatalytic behavior for Ag3PO4. The incorporated Ag3PO4 core–shell is prepared and characterized via XRD, FT-IR, Raman, TEM and BET. Besides, the thermal stability of the prepared core shell was investigated via TGA and DSC measurements. The optical properties and the energy band gap are determined using photoluminescence and DRS measurements. The photodegradation of methylene blue in the presence of the synthesized Ag3PO4 core–shell under visible light is examined using UV/Vis measurements. The effect of initial dye concentration and contact time are studied. In addition, the kinetic behavior of the selected dye during the photodegradation process shows a pseudo-first order reaction with rate constant of 0.015 min−1 for ZAg. The reusability of the Ag3PO4 core shell is evaluated, and the efficiency changed from 96.76 to 94.02% after three cycles, indicating efficient photocatalytic behavior with excellent stability.

14 June 2026 in BMC Chemistry
Verified
Journal Article
Open access
Ahmed Salah ElkholyAhmed Salah Elkholy
Ahmed Salah Elkholy
RSRasha S.Kamal
Rasha S.Kamal
MYMohamed S. Yahia
Mohamed S. Yahia
MAManar El-Sayed Abdel-Raouf
Manar El-Sayed Abdel-Raouf
Biochar from different agrowastes has been extensively used to eliminate various pollutants from wastewater. In the present work, raw lemon peels (RLP) were activated by microwave irradiation then converted into activated biochar (RLP-BC) by pyrolysis. Afterwards, both RLP and RLP-BC have undergone microwave-assisted chemical modification by hydrogen peroxide and nicotinic acid. These biosorbents were denoted as RLP, RLP-BC, OH-LP, OH-LP-BC, N-LP, and N-LP-BC respectively. They were characterized using different analytical techniques including IR, SEM, and EDX to investigate their properties. Surface topography of selected sorbents was examined using AFM, and their BET data were provided. These biosorbents were then tested for their ability to remove Co(II) from aqueous solutions under varying conditions. The adsorption experiments showed that the modified lemon peel materials showed adsorption affinity for Co(II) ions in alkaline medium, and the highest removal efficiency was achieved at pH 9. The adsorption equilibrium of Co(II) onto the biosorbents was described by the Langmuir isotherm, while adsorption kinetics were modeled using a pseudo-second-order approach for RLP-BC, N-LP, and N-LP-BC adsorbents. Thermodynamic parameters were also assessed. Results indicated that chemically modified biochar was the most effective in Co(II) removal. OH-LP-BC exhibited the highest Qmax (28.9 mg g−1), while N-LP-BC showed the lowest (14.5 mg g−1). Reusability tests demonstrated that these sorbents could be reused up to four times with removal efficiencies exceeding 50%. Furthermore, efficacy of the investigated sorbents in removal of Co(II) from a sample of fertilizer wastewater was explored at the optimized conditions. Our finding proves the suitability of the green sorbents as possible candidates for wastewater treatment application.

21 June 2026 in Hydrometallurgy
Verified
Journal Article
Closed access
Ahmed Salah ElkholyAhmed Salah Elkholy
Ahmed Salah Elkholy
AEAhmed S. Elzaref
Ahmed S. Elzaref
HGHosni Anwar Gomaa
Hosni Anwar Gomaa
AGAhmed A. Galhoum
Ahmed A. Galhoum

6 December 2022 in Research Square
Verified
Preprint
Open access
PDF file
Ahmed Salah ElkholyAhmed Salah Elkholy
Ahmed Salah Elkholy
MYMohamed Saber Yahia
Mohamed Saber Yahia
MEMohamed Abdelsamei Elnwawy
Mohamed Abdelsamei Elnwawy
HGHosny Anwar Gomaa
Hosny Anwar Gomaa
AEAhmed Shafek Elzaref
Ahmed Shafek Elzaref
The present study reports the feasibility of the synthesis of a novel porous activated carbon (OS400) composite adsorbent prepared from olive stone and impregnated with garnet (GA) types of black sand minerals. The Activated Carbon/ garnet composite (OSMG) was applied for the sorption of macromolecular organic dye. The structural characteristics of the synthesized composite were evaluated by Brunauer–Emmett–Teller (BET), N2 adsorption/desorption measurements, Scanning Electron Microscopy equipped with Energy Dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), and a Fourier transform infrared spectrometer (FT-IR). The specific surface area of (GA), (OS400), and (OSMG) were 5.157 m2.g− 1, 1489.598 m2.g− 1, and 546.392 m2.g− 1, respectively. The high specific surface area and effective active centers of the new composite promoted the adsorption of methylene blue (MB). The experiments were carried out under various conditions such as contact time, initial concentration of adsorbate, adsorbent dosage, pH, and temperatures. The equilibrium adsorption data were evaluated using the Langmuir and Freundlich isotherm models. The results display that, the adsorption isotherm had an excellent fitting to the Freundlich model. Furthermore, the data obtained from adsorption kinetic models showed that the pseudo-second-order model more agreeing for describing the (MB) adsorption reaction, suggesting a chemisorption mechanism. The values of thermodynamic parameters indicate that methylene blue dye adsorption onto the (GA) adsorbents through an endothermic reaction, while exothermic sorption of MB onto (OS400) and (OSMG), with a non-spontaneous process.