A novel power control is presented in full bridge converter to drive Light Emitting Diodes (LEDs). LEDs are current driven devices which require small voltage for current regulation. In this configuration, LED lamp is supplied by two voltage sources connected in series. One of the voltage source supplies directly to main portion of lamp power and other one delivers a small power through full bridge for regulation. This driver utilizes fifth harmonic component in the bridge output voltage which leads to reduction in the size of reactive components. The switching devices are operated at fundamental component of frequency. Hence reduced switching loss in full bridge results in high efficiency. Further, pulse width modulation (PWM) dimming control is incorporated. The simulation results are provided to confirm its validity.
8 February 2024 in IEEE Transactions on Industry Applications
LED lighting has emerged as a global solution for sustainable industrial lighting. The three-leg asymmetrical voltage resonant converter has been designed for optimal performance in dimmable Light-emitting diode (LED) lighting applications. Its distinctive features, including enhanced efficiency, asymmetrical voltage regulation, Zero Voltage Switching (ZVS) of all power switches, and an independent dimming control strategy, make it well-suited for high-power LED lighting applications. The converter under consideration incorporates a common leg-1 to drive load-1 and load-2. So that, the load-1 and load-2 are powered by the asymmetrical voltage between leg-1 and leg-2, and leg-1 and leg-3 respectively. To enable independent dimming control, the voltages between legs are nullified by individual dimming levels. The proposed circuit incorporates two resonant circuits. This configuration ensures that all power switches operate with ZVS, effectively minimizing switching losses. Further, the threshold voltage of each LED load is supplied by the battery in turn resulting in a lower power processing of the converter. The detailed operational principle and design considerations are discussed. Moreover, the loss analysis, detailed comparison with similar works, and the efficiency analysis at different dimming conditions are presented. Finally, the effectiveness of the converter is verified in a MATLAB Simulink environment and an 80W laboratory prototype.
18 August 2025 in IEEE Transactions on Consumer Electronics
This work presents a full-bridge-based driver circuit for powering two light-emitting diode (LED) lamps of different wattages. In the proposed topology, the LED lamp strings are connected in anti-series across the full bridge, which significantly reduces voltage stress on the switches. Zero-voltage switching (ZVS) is achieved through an LC resonant circuit, minimizing switching losses and improving efficiency. The current through the LC series circuit is inherently determined by the voltage difference between the two LED lamp strings. The system is powered by two equal-magnitude DC sources with series inductors, making it suitable for future DC-grid lighting applications. Additional advantages include low output ripple, reduced component count for cost-effectiveness, and high efficiency through soft-switching operation. A detailed theoretical analysis of the converters operating modes is provided to explain its performance and behavior. The concept is experimentally validated using a 73.4 W laboratory prototype, confirming the effectiveness and practical feasibility of the proposed solution in real-world LED driver applications.
Intuitive response and multi-objective control are well-known features of Finite Control Set Predictive Torque Control (FCSPTC). However, its implementation difficulty is a result of limitations such as high computations, strong model parameter dependency in control, and time-consuming tuning efforts for weighting factors in a cost function. Particularly, when FCSPTC is applied to a Multi-Level Inverter (MLI)-supplied motor drive, computation complexity is predominant. The proposed research work in this paper offers a new FCSPTC to dual two-level VSIs supplied for an Open Winding Permanent Magnet Synchronous Motor (OWPMSM) drive. The contributions of the proposed FCSPTC for the OWPMSM drive are the following. (i) Simplicity: There are fewer operational steps in control and limited evaluations with five prediction voltage vectors (VVs) out of 19, and a flux weighting-factor-less design is used by adopting a voltage cost function. (ii) Robustness: There is less parameter dependency in control through the involvement of stator resistance only. (iii) Switching frequency reduction: The application of an optimal switching state from the redundant switching states of optimal VVs is used to generate fewer switching state transitions, where the process is independent from the switching frequency weighting factor. According to theoretical and experimental findings, it is evident that the proposed FCSPTC technique operates effectively without the weighting factor and provides the above-stated features, resulting in an optimal response in flux, torque and current, switching frequency reduction, and low-complexity operation. The proficiency of the proposed FCSPTC technique is experimentally verified by comparing it with existing control schemes.