Yuliang Cai

Dr. Yuliang Cai


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 October 2025 in Buildings
Verified
Journal Article
Open access
PDF file
XFXu Feng
Xu Feng
YCYuliang Cai
Yuliang Cai
FWFei Wang
Fei Wang
ZLZhongda Lv
Zhongda Lv
WYWei Yang
Wei Yang
LWLei Wang
Lei Wang
Large precast concrete box girders are susceptible to cracking due to excessive temperature differentials induced by early-age hydration heat, compromising structural reliability and durability. Investigating the early-age hydration heat in large precast box girders and proposing corresponding temperature control measures based on influencing factor analysis is therefore essential. The present research employs field testing and numerical simulation of a 60 m precast railway box girder to develop a UMATHT subroutine and establish a refined finite element model incorporating temperature-dependent material properties and hydration degree. Results demonstrate that the early-age temperature field exhibits an initial rise followed by a decline. Pouring temperature exhibits a positive correlation with both peak temperature and maximum temperature differential; a 5 °C increase in pouring temperature elevates the temperature differential by nearly 1.8 °C. Cement content significantly affects peak temperature, with an average increase of approximately 5.4 °C per additional 50 kg/m3 of cement. Ambient wind speed exerts a greater influence on temperature evolution during the cooling phase than the heating phase. Increased ambient wind speed reduces the peak sectional temperature while concurrently increasing the surface temperature gradient on the windward side of the girder.

26 March 2026 in Buildings
Verified
Journal Article
Open access
PDF file
TZTao Zhang
Tao Zhang
WYWeitao Ye
Weitao Ye
WYWei Yang
Wei Yang
ZZZuqing Zhao
Zuqing Zhao
LWLei Wang
Lei Wang
YCYuliang Cai
Yuliang Cai
Early-age cracking is a common issue in the prefabrication of large-scale box girders, and the application of pre-tensioning techniques to introduce pre-compressive stress is an effective measure to mitigate such cracking. To determine an optimal pre-tensioning scheme for the 60 m large-scale box girder used in the Ningbo–Xiangshan intercity railway, friction coefficient tests and field stress monitoring were conducted. A numerical model simulating the pre-tensioning process of the box girder, accounting for the constraint of the steel formwork, was developed using Abaqus 2021. Based on the validated finite element model, a parametric study was performed to investigate the effects of friction coefficient, internal formwork roof, and prestressing tendon arrangement on the pre-compressive stress. The results indicate that the bond force between cast-in-place concrete and steel formwork is approximately 2.1 times the sliding friction force. As the friction coefficient increases, the pre-compressive stress in the box girder exhibits a notable decreasing trend. For the critical midspan section S40, the inclusion of frictional effects results in a more uniform distribution of pre-compressive stress. Compared to the case without the internal formwork roof, its inclusion leads to a 9.2% to 10.4% reduction in pre-compressive stress at section S40. To mitigate prestress losses transmitted from the ends to the midspan section, it is recommended that the internal formwork be completely removed prior to prestressing tensioning. The pre-compressive stress in the box girder varies considerably with different prestressing combinations. The comparative analysis of different prestressing combinations reveals substantial variations in pre-compressive stress distribution. After evaluating multiple schemes, the optimal pre-tensioning sequence for the 60-m railway box girder is determined as follows: sequentially tensioning tendon groups F1-2, F1-4, F1-5, F1-6, and B2-3, with an anchorage stress controlled at 558 MPa. This scheme ensures that all critical sections of the box girder remain in a pre-compressive state. In particular, the pre-compressive stress at the key midspan section S40 ranges from 1.12 to 1.26 MPa, achieving the desired effect and effectively suppressing early-age cracking in the large-scale box girder concrete.

20 November 2025 in Buildings
Verified
Journal Article
Open access
PDF file
WYWei Yang
Wei Yang
TZTao Zhang
Tao Zhang
ZZZuqing Zhao
Zuqing Zhao
XFXuebin Feng
Xuebin Feng
LWLei Wang
Lei Wang
YCYuliang Cai
Yuliang Cai
Large-scale concrete box girders are prone to early-age cracking because of the hydration reaction. To expedite the winter construction of large-scale precast box girders while mitigating the risk of thermal cracking induced by hydration heat, this study performs in situ temperature field monitoring and investigates the strength development of concrete under various curing conditions. The temperature field is numerically simulated using finite element analysis software ABAQUS and the secondary development of the subroutine. A parametric analysis is conducted to evaluate the influence of insulation rooms, insulation temperatures, and concrete placing temperatures. The results indicate that thermal insulation during winter construction effectively accelerates the development of concrete strength and enhances production efficiency. Compared to natural curing conditions, elevated insulation temperatures increase the temperature difference between the web core and inner surface, while reducing the early-stage temperature differences between the web core and outer surface. To minimize excessive temperature differences in large-scale box girders caused by hydration heat and thermal insulation during winter construction, it is recommended to maintain the concrete placing temperature below 19 °C and the insulation temperature within the range of 15–20 °C.

27 October 2026 in Buildings
Verified
Journal Article
Open access
PDF file
ZCZijing Cen
Zijing Cen
YCYuliang Cai
Yuliang Cai
JZJie Zhang
Jie Zhang
HZHuan Zhang
Huan Zhang
In precast girder yards, dense storage, limited scanning space, and mutual occlusion between girders make coarse registration of multi-station point clouds susceptible to noise, missing data, and insufficient overlap. To address these challenges, this study proposes an FPFH-based coarse registration method guided by structured classification features for precast prestressed concrete T-girders used in highway bridges. Based on the geometric characteristics of precast T-girders, engineering-oriented criteria are established to identify planar, linear, and corner features. Representative points from these features are then selected as FPFH descriptor centers. This introduces structural prior information into descriptor center selection while retaining the standard FPFH descriptor and SAC-IA coarse registration framework. Comparative experiments are conducted using 13 simulated Gaussian noise conditions and four local point cloud incompleteness conditions. The method is further validated using four scans of a single 30 m standard precast T-girder acquired at a precast girder yard. The results show that, compared with random-sampling FPFH, the proposed method reduces the coarse registration RMSE by 72.12% at a Gaussian noise level of 10 mm. Under local point cloud incompleteness ranging from 10% to 40%, the coarse registration RMSE is lower in all tested cases. At 40% incompleteness, the rotation errors about the three coordinate axes are reduced by more than 85% on average. The average runtime in the Gaussian noise simulations is reduced by 22.42%. For the field data, the average coarse registration RMSE and runtime are reduced by 62.42% and 28%, respectively. After ICP refinement, the average registration residual RMSE reaches 2.12 mm, representing an 80.97% reduction compared with random-sampling FPFH. These results indicate that the proposed method achieves favorable coarse registration performance under the tested conditions. It may provide a technical reference for multi-station point cloud merging and data preparation for subsequent geometric quality inspection of precast T-girders.