James Grandusky

Dr. James Grandusky

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2025 in Physica Status Solidi (b)
Verified
Journal Article
Open access
RBRobert T. Bondokov
Robert T. Bondokov
KHKasey Hogan
Kasey Hogan
GNGriffin Q. Norbury
Griffin Q. Norbury
Shogen MatsumotoShogen Matsumoto
Shogen Matsumoto
JGJames Grandusky
James Grandusky
Aluminum nitride (AlN) is an ultrawide bandgap (UWBG) semiconductor with a proven record on meeting the needs for the ultraviolet (UV) devices operating in the range of 210–280 nm. 2‐inch AlN substrates are commercially available. These substrates demonstrate excellent crystalline quality, low absorption coefficient, and can be produced in capacities of multiple of thousands. The great potential of the AlN as a UWBG semiconductor is based on numerous theoretical predictions. However, substrates with diameter of 100 mm are needed to evaluate the potential and ensure practical commercialization. Here, we report on our approach to develop the 100 mm AlN single‐crystal substrates. The AlN single crystals are grown using physical vapor transport (PVT) technique. The crystals are sliced and polished to obtain epiready surfaces. The 100 mm substrates are reported with a usable area >99%. The quality of the substrates evaluated using double‐crystal X‐ray diffraction (XRD) rocking curves shows a full width of the half maximum as low as 29 arcseconds. The epiready substrates have a mean miscut <0.1°. The 100 mm AlN material demonstrates high purity with major impurity concentration being less than 10 17 cm −3 . High‐purity material aids in obtaining high‐thermal conductivity evaluated using flash technique. The AlN substrates exhibit a room‐temperature thermal conductivity of ≈290 W m −1 K −1 .

1 December 2025 in APL Materials
Verified
Journal Article
Open access
YCYu-Hsin Chen
Yu-Hsin Chen
KSKeisuke Shinohara
Keisuke Shinohara
JEJimy Encomendero
Jimy Encomendero
NPNaomi Pieczulewski
Naomi Pieczulewski
KHKasey Hogan
Kasey Hogan
DJDebdeep Jena
Debdeep Jena
The development of large-wafer single-crystal AlN substrates has expanded their role beyond UV photonics to enable next-generation integrated electronics. In this study, we investigated δ-doped AlN/GaN/AlN heterostructures, where an n-type δ-doping layer is introduced to suppress the undesired two-dimensional hole gas at the bottom GaN/AlN interface, thereby enhancing the conductivity of the two-dimensional electron gas at the top AlN/GaN interface. We began by systematically identifying epitaxial growth conditions to achieve high crystalline quality, as confirmed by cross-sectional transmission electron microscopy images. To understand the impact of δ-doping density on transport properties, we combined theoretical modeling with experimental measurements, revealing that an optimal δ-doping density of ∼5×1013cm−2 minimizes interface roughness scattering and enhances mobility. Finally, we demonstrated scalability by extending the growth to large-area wafers, supported by structural and transport characterization. A sheet resistance of 246.8 ± 38.1 Ω/□ measured across a 3-in. (75 mm) wafer highlights the uniformity and performance potential of δ-doped AlN/GaN/AlN heterostructures for high-power, high-frequency electronic applications.

29 October 2025 in IEEE Journal of Microwaves
Verified
Journal Article
Open access
YYYoshiyuki Yanagimoto
Yoshiyuki Yanagimoto
SYShana Yanagimoto
Shana Yanagimoto
KHKasey Hogan
Kasey Hogan
JGJames Grandusky
James Grandusky
CLChunyi Li
Chunyi Li
James HwangJames Hwang
James Hwang
For electronic applications, polycrystal AlN has been widely used in packaging. Polycrystal AlN thin films with columnar grains have also been widely used in acoustic filters. Recently, with the availability of single-crystal AlN bulk wafers, transistors based on single-crystal AlN are emerging mainly because AlN has an ultrawide bandgap and high thermal conductivity. This makes AlN transistors especially attractive for high-power and high-frequency applications in harsh environments. To this end, single-crystal AlN wafers ≥ 2 inches in diameter have been in quantity production and commercially available, although their properties are not well characterized. This paper reports the microwave and millimeter-wave permittivities of single-crystal AlN, including its real and imaginary components. Using high-quality resonators of different bandwidths with meticulous care, the dielectric constant is found to be indeed constant at 7.805 ± 0.007 from 10 to 320 GHz, while the loss tangent increases linearly with frequency f according to (0.78 ± 0.01)·10−4·[1 + (2.22 ± 0.02)·10−11·f]. Across the frequency range measured, AlN exhibits lower loss than fused silica, a common low-loss dielectric. The four wafers measured show excellent uniformity with weak temperature dependence and little thickness dependence. Using a cylindrical resonator capable of temperature variation but with a narrow bandwidth around 10 GHz, the temperature coefficients of the dielectric constant and loss tangent are (6.1 ± 0.1)· (T − 300)·10−5 and (3.8 ± 0.1)·(T − 300)·10−3, respectively, where T is the absolute temperature in K. These characteristics confirm the potential of single-crystal AlN for high-power and high-frequency transistors in harsh environments.

18 May 2026 in Applied Physics Letters
Verified
Journal Article
Open access
Alan JacobsAlan Jacobs
Alan Jacobs
KGK. R. Gann
K. R. Gann
ERE. G. Rocco
E. G. Rocco
DPDaniel J Pennachio
Daniel J Pennachio
KHK. Hogan
K. Hogan
MMM. A. Mastro
M. A. Mastro
Aluminum nitride (AlN) is well suited to address evolving needs of future power systems for increased density, efficiency, and voltage handling. Eventual commercialization of power devices requires maturation of substrate technology to ensure fabrication of consistent devices impacted by the spatial distribution of defects and substrate inhomogeneities. Commercial 50 mm AlN substrates grown by physical vapor transport were characterized as received and after 1 μm of homoepitaxial growth by metalorganic chemical vapor deposition. Optical profilometry determined macro-roughness to be sub-nm while atomic force microscopy reveals consistent step edges and 0.1 nm micro-roughness, despite observation of sporadic 100–400 nm wide, ∼1 nm deep depressions. Sub-bandgap photoluminescence reveals broad spectroscopic signals, which slowly vary spatially across the wafer, corresponding with faint visible coloration. Raman spectroscopy indicates uniform, high crystal quality but shows increased background scattering associated with micrometer-scale features visible in optical microscopy. High-resolution x-ray diffraction validates the crystal quality with median (0002) full-width at half maximum of 17.6 arc sec and x-ray topography identified varying regions with dislocation density from ∼102 cm−2 to ∼mid-105 cm−2. Electron microscopy revealed nano-pipes that may be the origin of the nanoscale depressions and that at least some bright optical features are aluminum platelets with coherent atomic boundaries. After epitaxial growth, surface morphology retained smooth macro- and micro-roughness with clear step edges, demonstrating viability of device-relevant epitaxial layer thicknesses for power devices. Three wafers from one boule were characterized, indicating consistent wafer-to-wafer characteristics, critical for future device commercialization.

1 November 2026 in IEEE Transactions on Semiconductor Manufacturing
Verified
Journal Article
Closed access
JGJames C. Gallagher
James C. Gallagher
NMNadeemullah A. Mahadik
Nadeemullah A. Mahadik
AIAlecsander N. Imhof
Alecsander N. Imhof
RSRobert E. Stahlbush
Robert E. Stahlbush
AJAlan G. Jacobs
Alan G. Jacobs
MMMichael A. Mastro
Michael A. Mastro

2 September 2026 in Crystals
Verified
Journal Article
Open access
PDF file
RBRobert T. Bondokov
Robert T. Bondokov
Shogen MatsumotoShogen Matsumoto
Shogen Matsumoto
CCConnor Carr
Connor Carr
KHKasey Hogan
Kasey Hogan
GNGriffin Q. Norbury
Griffin Q. Norbury
JGJames Grandusky
James Grandusky
Ultrawide bandgap (UWBG) semiconductors are destined to become the foundation for next-generation power and radio-frequency (RF) electronic devices. Their superior qualities such as high thermal conductivity, strong critical electric field, and robust mechanical and radiation hardness are driving continuous and widespread research. Amongst the UWBG materials, aluminum nitride (AlN) is highly attractive due to its direct ultrawide bandgap of about 6.2 eV, resulting in one of the highest Baliga’s and Johnson’s figures of merit. Equally important as its properties are material availability and growth methods capable of producing large-diameter substrates. In this work we report on bulk growth of 100 mm AlN crystals using the physical vapor transport (PVT) technique. The thermal gradients were simulated and tailored to obtain adequate thermal stresses, resulting in substrates with narrow X-ray rocking curves and dislocation densities in the range of 102–105 cm−2. In addition, the room-temperature thermal conductivity measured in two directions, perpendicular and parallel to the c-axis, was confirmed to be 300 W m−1 K−1. AlN substrates also demonstrated high UV transparency with absorption coefficients as low as 10 cm−1 at 265 nm wavelength. These results, along with the availability of 100 mm substrates, demonstrate that AlN is ready for further exploration and development for the power and RF electronics industry.