Water scarcity constrains global cotton production. However, partial root-zone drying (PRD) and mulching can be used as good techniques to save water and enhance crop production, especially in arid regions. This study aimed to evaluate the effects of mulching for water conservation in an arid environment under PRD and to further assess the osmotic adjustment and enzymatic activities for sustainable cotton production. The study was carried out for 2 years in field conditions using mulches (NM = no mulch, BPM = black plastic mulch at 32 kg ha^-1, WSM = wheat straw mulch at 3 tons ha^-1, CSM = cotton sticks mulch at 10 tons ha^-1) and two irrigation levels (FI = full irrigation and PRD (50% less water than FI). High seed cotton yield (SCY) achieved in FI+WSM (4457 and 4248 kg ha^-1in 2017 and 2018, respectively) and even in PRD+WSM followed by BPM>CSM>NM under FI and PRD for both years. The higher SCY and traits observed in FI+WSM and PRD+WSM compared with the others were attributed to the improved water use efficiency and gaseous exchange traits, increased hormone production (ABA), osmolyte accumulation, and enhanced antioxidants to scavenge the excess reactive oxygen. Furthermore, better cotton quality traits were also observed under WSM either with FI or PRD irrigation regimes. Mulches applications found effective to control the weeds in the order as BPM>WSM>CSM. In general, PRD can be used as an effective stratagem to save moisture along with WSM, which ultimately can improve cotton yield in the water-scarce regions under arid climatic regions. It may prove as a good adaptation strategy under current and future water shortage scenarios of climate change.

Environmental stresses may alter the nutritional profile and economic value of crops. Chemical fertilizers and phytohormones are major sources which can enhance the canola production under stressful conditions. Physio-biochemical responses of canola altered remarkably with the use of nitrogen/phosphorus/potassium (N/P/K) fertilizers and plant growth regulators (PGRs) under drought stress. The major aim of current study was to evaluate nutritional quality and physio-biochemical modulation in canola (Brassica napusL.) from early growth to seed stage with NPK and PGRs in different water regimes. To monitor biochemical and physiological processes in canola, two season field experiment was conducted as spilt plot under randomized complete block design (RCBD) with four treatments (Control, Chemical fertilizers [N (90 kg/ha), P and K (45 kg ha^-1)], PGRs; indole acetic acid (IAA) 15g ha^-1, gibberellic acid (GA₃) 15g ha^-1and the combination of NPK and PGRs] under different irrigations regimes (60, 100, 120, 150 mm evaporations). Water stress enhanced peroxidase (POD), catalase (CAT), superoxide dismutase (SOD), polyphenol oxidase (PPO), soluble sugar, malondialdehyde (MDA), proline contents as well as leaf temperature while substantially reduced leaf water contents (21%), stomatal conductance (50%), chlorophyll contents (10–67%), membrane stability index (24%) and grain yield (30%) of canola. However, the combined application of NPK and PGR further increased the enzymatic antioxidant pool, soluble sugars, along with recovery of leaf water contents, chlorophyll contents, stomatal conductance and membrane stability index but decreased the proline contents and leaf temperature at different rate of evaporation. There is positive interaction of applied elicitors to the water stress in canola except leaf area. The outcomes depicted that the combination of NPK with PGRs improved the various morpho-physiological as well as biochemical parameters and reduced the pressure of chemical fertilizers cost about 60%. It had also reduced the deleterious effect of water limitation on the physiology and grain yield and oil contents of canola in field experiments.

Climate changes and poor soil nutrient profiles in sub-tropics are determinant factors to estimate crop productivity. This study aims to evaluate the impact of phytohormones, e.g., indole acetic acid (IAA) and gibberellic acid (GA₃), on mung bean yield, seed nutritional profile, and soil N availability in the sub-tropical region of Pakistan. The mung bean plants were treated with three levels (0, 30, and 60 mg L⁻¹) of IAA and GA₃ individually and/or in combination using a hydraulic sprayer. The amendments were applied in the flowering stage (approximately 25 days after germination) in a randomized complete block design. The results revealed that the 60 mg L⁻¹ concentration of IAA and GA₃ led to significant changes in the growth and yield traits compared to non-treated plants. For example, GA₃ positively influenced the biological yield (35.0%), total carbohydrate (7.0%), protein (16.0%), and nitrogen (14.0%) contents in mung bean seeds, compared to the control (CK). Additionally, the combined foliar treatment of IAA and GA₃ (IAA₂ + GA₂) displayed a much stronger influence on yield attributes, such as the number of pods by 66.0%, pods’ weights by 142.0%, and seed yield by 106.5%, compared with the CK. Mung bean plants showed a significant improvement in leaf photosynthetic pigments under a higher level (60 mg L⁻¹) of sole and combined treatments of IAA and GA₃. Moreover, except abscisic acid, the endogenous concentration of IAA, GA₃, and zeatin was enhanced by 193.0%, 67.0%, and 175.0% after the combined application of IAA and GA₃ (IAA₂ + GA₂) compared to the CK treatment. In addition, soil N availability was increased by 72.8% under the IAA₂ treatment and 61.5% under IAA₂ + GA₂, respectively, compared with the control plot. It was concluded that the combined treatment of IAA and GA₃ (IAA₂ + GA₂) followed by the sole application of GA₃ and IAA at a 60 mg L⁻¹ concentration were most effective treatments to improve the morpho-physiology and nutrient profile of mung beans; however, the underlying molecular mechanisms need to be explored further.

The current study was carried out at Nuclear Institute of Agriculture, Tandojam to assess ten mungbean mutants together with one check cultivar in two separate cropping seasons. The findings revealed that all mutants, with the exception of the branches per plant, had significantly different examined traits. By characterizing ten variables, including plant height (cm), number of branches/plant, number of seeds per pod, grain yield per plot (g/plot), grain weight per plant, pod length (cm), pods per plant, days to flowering, above ground biological weight per plot (g/plot) and days to maturity, the results could considerably differentiate between low and high producing mutants. Discriminant analysis was used to choose high-yielding genotypes. The discriminant score demonstrated a significant canonical correlation of 0.994** and could account for 98.8 % of differences in mungbean production. According to the results of discriminant function analysis, the most significant features are pod length, days to flowering, plant height and above ground biological weight. The highest discriminant scores were displayed by the genotypes AEM66, AEM27, AEM25 and AEM14, identified as high yielding mutants. The low yielding mungbean mutants, designated Viz, AEM20, AEM30, AEM35, AEM-96, AEM29, AEM40 and AEM32 are those that exhibit the lowest values of the discriminant score. Mungbean cultivation is more successful in the summer than it is in the spring.

The global demand for crop production is rapidly growing due to the continued rise in world population. Crop productivity varies generally with soil nutrient profile and climate. The optimal use of fertilizers might help to attain higher crop yield in canola. To circumvent nutrient imbalance issues in soil, two separate field trials were conducted to determine (a) the best source of nitrogen (N) between ammonium sulfate (NH₄)₂SO₄) and ammonium nitrate (NH₄NO₃), (b) significance of gibberellic acid (GA₃) and potassium (K), in an attempt to enhance canola yield and yield attributes. Both experiments were carried out in randomized complete block design (RCBD) with three replicates. The nitrogen source in the form of NH₄)₂SO₄ (0, 10, 20 and 30 kg/ha) and NH₄NO₃ (0, 50, 75 and 100 kg/ha) was applied in the rhizosphere after 3 and 7 weeks of sowing, referred to as experiment 1 (E1). In another separate experiment (E2), the canola crop was sprayed with four level of GA₃ (0, 10, 15, 30 g/ha) and K (0, 2.5, 3.5, 6 g/ha) individually or in combination by using hydraulic spryer, 30 days after sowing (DAS). The data was collected at different growth stages of canola and analyzed statistically. The E1 trail showed that N fortification in the form of NH₄NO₃ (100 kg/ha) and (NH₄)₂SO₄ (30 kg/ha) had a positive effect on the plant height, number of branches, fruiting zone, seed yield per plant, seed yield per hectare of canola except oil percentage. Moreover, canola plants (E2) also displayed a significant improvement on all studied features with high doses of GA₃ (30 g/ha) and K (6 g/ha) individualy and in combined form. The correlation coefficient analysis of (NH₄)₂SO₄ and NH₄NO₃ was highly significant to plant height, number of branches, fruiting zone, seed yield per plant, seed yield per hectare of canola In a nutshell, compared to both source of N, NH₄NO₃ was more efficient and readily available source of N. GA₃ being a growth elicitor and potassium as a micronutrient serve as potential source to improve yield and to manage nutrient profile of canola.