Yang Gao

Dr. Yang Gao

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 October 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YGYang Gao
Yang Gao
VSVarun V. Soman
Varun V. Soman
JLJack P. Lombardi
Jack P. Lombardi
PRPravakar Prasad Rajbhandari
Pravakar Prasad Rajbhandari
TDTara P Dhakal
Tara P Dhakal
ZJZhanpeng Jin
Zhanpeng Jin
Noninvasive sensors capable of measuring weak biopotential signals, such as electrocardiogram (ECG) and EEG, and communicating results wirelessly to a host computer are developing rapidly. Some of them utilize capacitively coupled electrodes in an attempt to place the sensor at a distance from the skin. This article demonstrated the fabrication and development of a capacitively coupled ECG electrode prototype using custom high specific capacitance electrodes and custom high-performance electronics. Two ultrathin capacitive electrodes were fabricated on a flexible polyimide substrate (2 × 2 in) protected by a guard ring to reduce noise. The detection and amplification circuitry consisted of operational amplifiers (OpAmps) that filtered and conditioned the ECG signal. R-peaks in the ECG were readily detected and quantified using both simulated signals from ECG databases and real signals from human subjects. Heart rates and heart rate variability calculated from our monitor measurements were comparable with commercial rigid wearable sensors, including a smartwatch and an ECG monitor that uses standard clinical ionic electrodes. The prototype monitor was tested on human subjects during rest and moderate exercise and showed appropriate responses. The challenge of high-gain low-noise amplification was met by the development of highly thinned OpAmps whose operation was shown to be equivalent to commercially available rigidly packaged OpAmps, demonstrating that high-performance Si-electronics can be used to produce high-fidelity signals from weak biopotentials.

27 September 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Verified
Journal Article
Open access
JLJiyang Li
Jiyang Li
LHLin Huang
Lin Huang
SSSiddharth Shah
Siddharth Shah
SJSean J. Jones
Sean J. Jones
YJYincheng Jin
Yincheng Jin
ZJZhanpeng Jin
Zhanpeng Jin
Sign language is a natural language widely used by Deaf and hard of hearing (DHH) individuals. Advanced wearables are developed to recognize sign language automatically. However, they are limited by the lack of labeled data, which leads to a small vocabulary and unsatisfactory performance even though laborious efforts are put into data collection. Here we propose SignRing, an IMU-based system that breaks through the traditional data augmentation method, makes use of online videos to generate the virtual IMU (v-IMU) data, and pushes the boundary of wearable-based systems by reaching the vocabulary size of 934 with sentences up to 16 glosses. The v-IMU data is generated by reconstructing 3D hand movements from two-view videos and calculating 3-axis acceleration data, by which we are able to achieve a word error rate (WER) of 6.3% with a mix of half v-IMU and half IMU training data (2339 samples for each), and a WER of 14.7% with 100% v-IMU training data (6048 samples), compared with the baseline performance of the 8.3% WER (trained with 2339 samples of IMU data). We have conducted comparisons between v-IMU and IMU data to demonstrate the reliability and generalizability of the v-IMU data. This interdisciplinary work covers various areas such as wearable sensor development, computer vision techniques, deep learning, and linguistics, which can provide valuable insights to researchers with similar research objectives.

24 March 2021 in IEEE Transactions on Information Forensics and Security
Verified
Journal Article
Closed access
YGYang Gao
Yang Gao
WWWei Wang
Wei Wang
YJYincheng Jin
Yincheng Jin
CZChi Zhou
Chi Zhou
Wenyao XuWenyao Xu
Wenyao Xu
ZJZhanpeng Jin
Zhanpeng Jin
To address the increasing challenges of counterfeit detection and IP protection for 3D printing, we propose that every 3D printer holds unique fingerprinting features characterized by the thermodynamic properties of the extruder hot-end and can be used as a new way of 3D watermarking. We prove that these physical fingerprints resulting from manufacturing imperfections and system variations exhibit distinct heating responses, namely “ThermoTag,” which can be represented as the distinguishable thermodynamic processes and, ultimately, the temperature readings during the preheating process. Experimental results show that, by only changing the hot-ends of the same model on the same 3D printer, we can achieve about 92% identification accuracy amongst 45 hot-ends. The permanence and robustness of ThermoTag for the same hot-end were examined, throughout a period of one month with hundreds of trials under different environmental temperature settings. Leveraging the hidden ThermoTag, an example of watermarking scheme in 3D printing is presented and evaluated.

26 May 2020 in IEEE Transactions on Biometrics, Behavior, and Identity Science
Verified
Journal Article
Closed access
BLBorui Li
Borui Li
WWWei Wang
Wei Wang
YGYang Gao
Yang Gao
VPVir V. Phoha
Vir V. Phoha
ZJZhanpeng Jin
Zhanpeng Jin
In this paper, we propose enhanced continuous authentication by supplementing keystroke and mouse dynamics with wrist motion behaviors. Our method bridges the security gap when neither the mouse nor the keyboard is being used, such as during transitions from mouse to keyboard and vice versa, or during intermittent pauses when wrist movement is captured. Context-aware keystroke latency feature cell generation improves performance and solves latency fluctuation – different diagraphs have different latencies in different words. Based on two Random Forest Ensemble Classifiers (RFECs) recognizing the mouse and keystroke actions with corresponding wrist motions and one Sequential Sampling Analysis (SSA) or SSA Dynamic Trust Model (SSA-DTM), the identity of the user can be continuously verified no matter the operation mode — mouse clicking or keyboard typing. Experimental results, based on 44 subjects, show that the proposed approach can reach an FRR of 0.92% for genuine users and an FAR of 0 for attackers. The approach is shown to be more superior in efficient and timely authentications by making an authentication decision within only 35 mixed actions — mouse clicks or keystrokes, compared with conventional methods solely based on the mouse geometry and locomotion features or keystroke latency features.

27 March 2023
Verified
Conference Paper
Open access
SCSeokmin Choi
Seokmin Choi
JYJunghwan Yim
Junghwan Yim
YJYincheng Jin
Yincheng Jin
YGYang Gao
Yang Gao
JLJiyang Li
Jiyang Li
ZJZhanpeng Jin
Zhanpeng Jin
Wearable devices have become indispensable gadgets in people’s daily lives nowadays; especially wireless earphones have experienced unprecedented growth in recent years, which lead to increasing interest and explorations of user authentication techniques. Conventional user authentication methods embedded in wireless earphones that use microphones or other modalities are vulnerable to environmental factors, such as loud noises or occlusions. To address this limitation, we introduce EarPPG, a new biometric modality that takes advantage of the unique in-ear photoplethysmography (PPG) signals, altered by a user’s unique speaking behaviors. When the user is speaking, muscle movements cause changes in the blood vessel geometry, inducing unique PPG signal variations. As speaking behaviors and PPG signals are unique, the EarPPG combines both biometric traits and presents a secure and obscure authentication solution. The system first detects and segments EarPPG signals and proceeds to extract effective features to construct a user authentication model with the 1D ReGRU network. We conducted comprehensive real-world evaluations with 25 human participants and achieved 94.84% accuracy, 0.95 precision, recall, and f1-score, respectively. Moreover, considering the practical implications, we conducted several extensive in-the-wild experiments, including body motions, occlusions, lighting, and permanence. Overall outcomes of this study possess the potential to be embedded in future smart earable devices.

12 June 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Verified
Journal Article
Open access
YJYincheng Jin
Yincheng Jin
Shibo ZhangShibo Zhang
Shibo Zhang
YGYang Gao
Yang Gao
XXXuhai Xu
Xuhai Xu
SCSeokmin Choi
Seokmin Choi
ZJZhanpeng Jin
Zhanpeng Jin
Sign language builds up an important bridge between the d/Deaf and hard-of-hearing (DHH) and hearing people. Regrettably, most hearing people face challenges in comprehending sign language, necessitating sign language translation. However, state-of-the-art wearable-based techniques mainly concentrate on recognizing manual markers (e.g., hand gestures), while frequently overlooking non-manual markers, such as negative head shaking, question markers, and mouthing. This oversight results in the loss of substantial grammatical and semantic information in sign language. To address this limitation, we introduce SmartASL, a novel proof-of-concept system that can 1) recognize both manual and non-manual markers simultaneously using a combination of earbuds and a wrist-worn IMU, and 2) translate the recognized American Sign Language (ASL) glosses into spoken language. Our experiments demonstrate the SmartASL system's significant potential to accurately recognize the manual and non-manual markers in ASL, effectively bridging the communication gaps between ASL signers and hearing people using commercially available devices.