The relevance of the research lies in the use of a flexible working body in the form of a cable as part of a soil-cultivating ripping-separating machine. It has been experimentally proven that a flexible working body in the form of a cable as part of an experimental machine provides a more rational redistribution of agronomically valuable soil lumps along the depth of the cultivated layer. When tilling the soil to a depth of 0.03 m, an additional leveling of the soil surface occurs. The combined working body allows for a single pass of the unit to provide high quality tillage and effective control of weed growth. The destruction of dicotyledonous weeds by a machine with an additional flexible working body exceeded the result by 13% obtained without using a flexible working body.
14 November 2023 in Acta Technologica Agriculturae
The paper presents data on the resource and wear of the gears of agricultural tractor transmissions, on the basis of which the research problem and the novelty of the proposed methodology are formulated, based on the development and application of the stress state model of the gear, taking into account surface hardening. The methodology and calculation scheme for determining the power parameters of gearing are described in detail. In this case, the dependences and results of previous studies in the field of increasing the durability and reducing the wear of gears of transmission elements of vehicles of various functional purposes were used. To achieve this goal, the mathematical models of the stress state of gears are constructed without the presence of an external diffusion hardening coating and with a coating. Based on the simulation of the process of interaction of rubbing pairs of gears, the distribution of stresses in the contact zone over the surface layer of non-hardened and cemented to a depth of 1 mm gears, as well as the dependence of deflection on the thickness of the cemented layer and the deformation of the cemented layer during operation was established. Considering the research results given in literature, as well as those obtained on the basis of our own research, it should be noted that the analysis of gear stress state is an important direction in the study of the durability of gear units, the entire gearbox, and other gears of tractor transmissions and automotive technology at the present time. At the same time, the actual task is to establish the ratios of the allowable wear of gears and the limiting value of displacement of the centre distance, taking into account changes in the stress state scheme when using various types of coatings.
24 February 2024 in Acta Technologica Agriculturae
The degradation of chernozems and increased soil erosion led to the search for more advanced methods of tillage, taking into account climatic conditions, the quantity and quality of crop residues, and the volume of fertilizer application. The aim of the study was to establish the effect of various methods of basic tillage in the presence of preceding plant‘s crop residues on the growth and development of spring barley plants. The experiment was carried out in the forest-steppe of Ukraine. During the experiment, the influence of various methods of basic tillage on the agrophysical properties of the soil, its water regime, and weed infestation of spring barley crops was studied. For comparison, the following types of basic tillage were used: dump to a depth of 20–22 cm, chisel tillage to a depth of 14–16 cm, and disc tillage to a depth of 10–12 cm. Dump and chisel processing were characterized by higher grain yield. Chisel tillage provided better moisture accumulation compared to reverse ploughing. In spring, at the time of sowing grain crops in the layer of 0–15 cm, the reserves of productive moisture during chiselling were 145 mm, and during mouldboard processing 122.6 mm. Thus, chisel tillage for spring barley creates the best conditions for moisture supply and guarantees a high level of grain yield and significant profitability of production.
Until recently, mouldboard ploughing was used as the main tillage in almost the entire territory of Ukraine and Russia. However, mouldboard technologies contribute to the formation of a “plough pan”, which contributes to additional soil compaction. The intensity of agricultural production exacerbated the problem of soil compaction by machine and tractor units. The over-consolidation of soil results in stunted plant root growth, lack of oxygen, and water and nutrient restrictions. Soil compaction can be reduced by deep local chiselling. The aim of the study was to determine the density of the soil at different depths during continuous traditional cultivation (reverse ploughing). The density of the soil was evaluated by resistance to penetration into the soil in a vegetable-forage crop rotation on an experimental field with continuous traditional tillage. The measurement of penetration resistance was carried out using an automatic electronic hardness tester “DATAFIELD”. The boundaries of the experimental field were determined, a computer map of the experimental field was compiled with automatic “grid” of plot sizes, two-dimensional mapping was carried out, and the sequence and place of measurements were developed. As a result, the level of soil compaction at different penetration depths and resistance to root growth was determined. It has been established that with constant traditional reverse tillage, the soil at a depth of more than 10 cm is sufficiently compacted. At a depth of 15 cm, a strong compaction of the soil is observed, which indicates its physical and hydrological degradation.
For seed germination and the formation of a good soybean crop, significant reserves of soil moisture are required, which depends on the autumn-winter soil preparation, weather conditions and planting dates. The purpose of this study is to identify the impact of the main tillage technology on its agrophysical properties and conditions for the growth and development of soybean plants. Experimental crop rotation: soybean – winter wheat was carried out under favourable (hydrothermal coefficient 1.46) and dry (hydrothermal coefficient 0.66–0.87) weather conditions. The main tillage was carried out with a stratifier PRSM-5 to a depth of 15–17 cm or a chisel plough PCh-2.5 to a depth of 25–27 cm, with additional pre-sowing or post-sowing rolling with a ring-spur roller KKSH. Sowing was carried out at a depth of 10 cm with stable heating of the soil in three periods: the first at 8–10 °С, the second at 10–12 °С, and the third at 12–14 °С. As a result of evaluating the influence of various factors, it was found that under favourable conditions, the highest seed productivity of soybean plants (1.91–1.96 t·ha −1 ) was formed after treatment with the stratifier PRSM-5 at the first sowing period and at the second sowing period after chisel ploughing with additional soil compaction. In dry weather conditions, pre-sowing treatment with a stratifier PRSM-5 had an advantage in seed productivity by 7–12% compared to ploughing with a chisel plough PCH-2.5.