The paper presents data on the resource and wear of the gears of agricultural tractor transmissions, on the basis of which the research problem and the novelty of the proposed methodology are formulated, based on the development and application of the stress state model of the gear, taking into account surface hardening. The methodology and calculation scheme for determining the power parameters of gearing are described in detail. In this case, the dependences and results of previous studies in the field of increasing the durability and reducing the wear of gears of transmission elements of vehicles of various functional purposes were used. To achieve this goal, the mathematical models of the stress state of gears are constructed without the presence of an external diffusion hardening coating and with a coating. Based on the simulation of the process of interaction of rubbing pairs of gears, the distribution of stresses in the contact zone over the surface layer of non-hardened and cemented to a depth of 1 mm gears, as well as the dependence of deflection on the thickness of the cemented layer and the deformation of the cemented layer during operation was established. Considering the research results given in literature, as well as those obtained on the basis of our own research, it should be noted that the analysis of gear stress state is an important direction in the study of the durability of gear units, the entire gearbox, and other gears of tractor transmissions and automotive technology at the present time. At the same time, the actual task is to establish the ratios of the allowable wear of gears and the limiting value of displacement of the centre distance, taking into account changes in the stress state scheme when using various types of coatings.
23 October 2018 in IOP Conference Series: Materials Science and Engineering
The aim of the research was to improve the physical model of deformation of a bent ferro-concrete element with cracks on the basis of modern achievements in the theory of damage accumulation and fracture mechanics. The presented model allows to determine the rigidity of the element in the operation stage taking into account the damage, the work of the stretched concrete over the macrocrack, the concentration of stresses at its apex, and the presence of a pre-destruction zone in it. The analysis of the results of calculating the rigidity of elements with different percentages of reinforcement by the proposed method and the diagram method using different diagrams of concrete deformation is performed. It has been established that the work of stretched concrete over the macrocrack has a greater effect on the rigidity at a load exceeding the cracking time by no more than 30%, which is especially pronounced in strongly reinforced elements (up to 48%).
23 October 2018 in IOP Conference Series: Materials Science and Engineering
The article presents the current state and prospects of development of diagramm methods for the calculation of reinforced concrete construction. A brief review obtained by the authors results in this area, where great attention is paid to the improvement of curvilinear diagrams of concrete for different types of static loading of structures. Topical application of the considered methods for the analysis of structures in the zone of joint action of bending moments and shearing force that is not yet reflected in domestic and foreign regulations. In conclusion, the publication identifies ways for further research in the chosen area.
House building is an integral part of human life. Improving the standard of living of the population dictates the need to design and build housing, taking into account the requirements of environmental friendliness, safety, convenience and comfort of living. A modern developer has access to a wide range of building materials of a similar purpose, but of different types of components used in the production of these materials. In the climatic conditions of Russia, the main indicator of building materials used for building envelopes is their thermal conductivity. Achievements in the chemical industry have made available building materials based on SIP panels filled with a highly effective heat insulator - expanded polystyrene. At the same time, polystyrene foam is quite difficult to call a material with high environmental performance. The construction of a "green house" requires the use of materials of natural, natural origin with minimal heat transfer and high safety in terms of fire, emission of harmful substances, natural micro-ventilation. This article compares the performance of SIP panels and panels with wood-mineral filling in relation to individual housing construction. The environmental aspects of building a house from traditional SIP panels and panels with filler in the form of a wood-mineral composite are considered. Modern production technologies are highlighted and data on the number of housing commissioned are given. Using the Elcut solid modeling program, calculations were made of the thermal conductivity of SIP panels with different fillers: the classic version is expanded polystyrene, the alternative is wood-mineral composite. Based on the calculations obtained, the criteria for choosing a wood-mineral composite as a heater are substantiated, both from an environmental point of view and from technical indicators.
31 March 2023 in Engineering and Construction Bulletin of the Caspian Region
В статье раскрывается особенности объектов объемно-пространственной композиции архитектурной и инженерной мысли конца XIX – начала XX в. Авторы обращают внимание на баланс – соотношение композиционной формы и содержательной части в искусственно созданном продукте в русле изучения композиции в учебной или творческой практике. Анализ данного соотношения становится важной константой оценки продукта архитектурно-инженерной мысли, что нивелирует оценивания на уровне непрофессионального и ненаучного высказывания «мне нравится – мне субъективно не нравится». Приводится пример композиционного анализа высотных структур и образцов наследия эпохи историзма. Интересующая авторов проблема рассматривалась разными учеными и исследователями, но авторы статьи рассматривают проблему с позиций анализа инженерной и архитектурной части целостного композиционного организма. Авторы пишут об универсальности законов и средств композиции, равенстве и единстве или соотношении содержательной (архитектурная эстетика) и формальной (инженерная конструкция, материалы, композиция и т. д.) составляющих искусственно создаваемую форму.
23 October 2018 in IOP Conference Series: Materials Science and Engineering
The article deals with steel triangular lattice towers with a triangular or diagonal bars for the construction of supports of transmission lines, poles wind generator installations, supports for the placement of lighting equipment. For these constructions have become consumption depends on the geometric parameters of cross-section. Therefore, to reduce the consumption of steel must be assigned the optimal value of parameters such as the height of the cross-section, angle braces. For these supports, an analytical expression of the masses. From the condition of a minimum weight of a formula for determining the optimal height of the cross-section triangular lattice towers. the equations and the graphs allow to determine these parameters to determine the optimal tilt angle braces and supports a triangular lattice truss. The value of the optimal angle for the supports with a triangular lattice is αopt = 68°, and for bearings with diagonal bars αopt = 63°.