The paper presents data on the resource and wear of the gears of agricultural tractor transmissions, on the basis of which the research problem and the novelty of the proposed methodology are formulated, based on the development and application of the stress state model of the gear, taking into account surface hardening. The methodology and calculation scheme for determining the power parameters of gearing are described in detail. In this case, the dependences and results of previous studies in the field of increasing the durability and reducing the wear of gears of transmission elements of vehicles of various functional purposes were used. To achieve this goal, the mathematical models of the stress state of gears are constructed without the presence of an external diffusion hardening coating and with a coating. Based on the simulation of the process of interaction of rubbing pairs of gears, the distribution of stresses in the contact zone over the surface layer of non-hardened and cemented to a depth of 1 mm gears, as well as the dependence of deflection on the thickness of the cemented layer and the deformation of the cemented layer during operation was established. Considering the research results given in literature, as well as those obtained on the basis of our own research, it should be noted that the analysis of gear stress state is an important direction in the study of the durability of gear units, the entire gearbox, and other gears of tractor transmissions and automotive technology at the present time. At the same time, the actual task is to establish the ratios of the allowable wear of gears and the limiting value of displacement of the centre distance, taking into account changes in the stress state scheme when using various types of coatings.
1 January 2016 in Russian Journal of Nondestructive Testing
A subminiature transformer eddy-current transducer (ECT) that is intended for the study of different nonuniform materials, alloys, miniature parts, printed-circuit boards, and microscopic defects has...
The paper puts forward a modified eddy current testing method based on the use of miniature eddy current transducers within a localized controlled area of the material surface of up to 50 μm2. Measurement results are provided for a model composite material made up of alternating conducting and dielectric layers of system Al-HDPE-Al. Structural flaws are specified as changes in the number and position of layers in the sequence. Prospects of the proposed method and a measuring device operating on its basis for flaw detection in composite aluminum alloy materials are shown.
12 November 2014 in Instruments and Experimental Techniques
Based on a transformer eddy current transducer (ECT), a probe has been designed to study metal-dielectric-metal structures. The structural diagram of the probe is given and the basic technical data are stated (the number of windings is 10–130 turns, and the value of the initial permeability of the core μmax = 500). The scheme that uses the computer as a generator and receiver of signals from windings is considered. The measurement procedure allowing one to detect defects in laminate composites with a high accuracy is described. The transducer was tested on the layered structure consisting of paper and aluminum layers with a thickness of 100 μm each in which the model defect was placed. The dependences of the ECT signal on the defect in this structure are given.
20 January 2015 in IOP Conference Series: Materials Science and Engineering
Based on an eddy-current transducer (ECT), a probe has been designed to study the semiconductor material. The structural diagram of the probe is given and the basic technical data are stated (the number of windings is 10-130 turns, and the value of the initial permeability of the core μ max = 500). Due to the high confinement of the magnetic field, it is possible to acquire data from small areas of semiconductor plates. Response versus ECT positioning diagram is also provided.