Salt crystallization is accepted to represent one of the major causes for the degradation of building and ornamental stone. As such, it has attracted the attention of researchers, who over the years have progressively unraveled most mechanisms involved in salt damage. Despite this, many questions subsist about how to quantitatively predict damage or its progression, and in particular how to relate performance on site to that in laboratory tests. In this context, a new RILEM TC has been started with the objective of defining laboratory tests that deliver more reliable predictions of field behavior. One deliverable of this TC, is to provide a theoretical insight into this question based on recent progress on the understanding of salt damage. This paper presents a summary of this work, highlighting key aspects relating to crystallization pressure, chemo-mechanics and transport. Implications are more specifically discussed in relation to existing accelerated tests in an attempt to better define the type of field exposure that they may best represent. A simple conceptual model for the development of salt damage is introduced. During an initial “induction” phase, transport of ions and accumulation of salt in the porous materials occurs without causing detectable damage until a critical point, termed “damage onset” is reached. Beyond this point, during the “propagation phase”, the material degrades increasingly. The implications of these two phases are discussed in relation to the selection of appropriate salt weathering tests and conservation interventions.

Chloride ingress can lead to serious degradation of various materials and structures. Continuous measurements of local chloride concentrations is thus of uttermost importance for laboratory research, monitoring of structures, and predictions of the residual life span for the most common building materials. This work investigates the applicability of Ag/AgCl ion-selective electrodes for the non-destructive continuous measurement of local chloride concentrations in concrete and stone when exposed to chloride-bearing environments such as seawater. The work studies the stability of Ag/AgCl ion-selective electrodes in neutral and alkaline solutions and the sensitivity to the main interfering ions coming from the environment and from the material itself. The results indicate negligible interference from fluoride, sulfate, and hydroxyl but considerable from bromide and sulfide. In chloride-free alkaline solutions, Ag/AgCl ion-selective electrodes are not stable over time, but—upon chloride arrival—they permit again reliable measurements of the chloride concentration. The results concerning interference are discussed by taking into account typical exposure environments and it is concluded that the ion-selective electrodes can satisfactorily be used to monitor chloride concentrations in built structures made out of concrete or stone.

Stone consolidants have been extensively used for the preservation of historical structures since the 19th century. However, their true effectiveness in practice is often a source of debate, largely because of known cases where badly chosen treatments were unsuccessful, or even caused an accelerated degradation of the substrate. Researchers have therefore strived to better understand, and possibly predict, the behavior of consolidants on-site, in order to assist practitioners in their decision making. Despite the large number of publications available on the subject, however, the contribution of scientific research for practical applications remains scarce. Reasons for this include the limited accessibility of scientific publications and the lack of documentation or preparatory studies from the field. This unfortunately compromises the knowledge exchange between researchers and practitioners, which we consider to be a main challenge that this field must overcome. The target of this letter is to reconnect the critical problems identified on-site through practical experience with the conceptual research outcomes that could help solve them. For this, we present an informed evaluation of the most needed research, along with a synthetic overview of the insights that scientific research can offer in terms of consolidant selection, application and monitoring.