Jinghua Wang

Dr. Jinghua Wang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2023 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
XZXiangchun Zhang
Xiangchun Zhang
ZLZixuan Luo
Zixuan Luo
JLJunlong Liu
Junlong Liu
JWJinghua Wang
Jinghua Wang
MSM. Mehdi Shafieezadeh
M. Mehdi Shafieezadeh
Water-based enhanced oil recovery methods have been developed to improve the oil production rate from ultra-tight reservoirs. By coupling the effect of surfactant as wettability alteration and water alternating gas injection method, we aimed to determine the most efficient enhanced oil recovery technique. We performed seven injectivity scenarios to measure the oil recovery factor by introducing the alkylbenzene sulfonic acid (LABSA) as a surfactant agent during the active carbonated water alternating gas (ACWAG) injection. To consider the effect of slug size during water alternating gas injection, we used two different slug sizes (0.3, and 0.6). After the water breakthrough, a little oil volume was produced, and the maximum oil recovery factor at 1.5 Pore Volume (PV) was 26%. This issue corresponded to the water channeling after the breakthrough point. For smaller slug sizes (0.3), the maximum oil recovery factor (78%) was reached in smaller pore volumes. One of the exciting results wass the considerable influence of slug ratio during the water alternating gas (WAG) injection, in which it provided more oil recovery factor (83%) when the gas volume is higher than the water volume. Finally, by introducing the coupling effect of active carbonated water (made by LABSA surfactant) and WAG injection, the maximum oil recovery factor was 85%, corresponding to the better efficiency of active carbonated water in interfacial tension reduction. The results of this comprehensive investigation can be extended in ultra-tight sandstone reservoirs and can be applied as a further guideline in numerical simulations. Graphical abstract

14 April 2025 in Energies
Verified
Journal Article
Open access
PDF file
YSYangnan Shangguan
Yangnan Shangguan
BLBoying Li
Boying Li
CGChunning Gao
Chunning Gao
JJJunhong Jia
Junhong Jia
YZYongqiang Zhang
Yongqiang Zhang
TXTao Xu
Tao Xu
This study focuses on a low-permeability sandstone reservoir in the Changqing Oilfield, aiming to elucidate the formation mechanism and occurrence state of residual oil during late-stage waterflooding development, thereby providing theoretical guidance for refined residual oil recovery. By integrating scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), and digital core analysis, the oil–water occurrence state and dynamic characteristics during waterflooding were systematically investigated. NMR was employed to determine fluid distribution within core pores, while CT scanning was utilized to construct a 3D digital core model, enabling the identification of microscopic residual oil displacement and occurrence states at different flooding stages. The oil displacement efficiency was further analyzed based on variations in oil–water distribution and occurrence states within the core. The results demonstrate that pore and throat size and connectivity are the primary factors governing reservoir permeability. After high-pore-volume (PV) waterflooding, microscopic residual oil predominantly exists as dispersed droplets, films, and small-scale clusters or columns. Although prolonged high-PV waterflooding effectively expands the sweep volume, localized displacement efficiency declines, and reservoir heterogeneity adversely affects sweep volume maintenance. The post-flooding residual oil characteristics are collectively determined by the core’s local connectivity, wettability, and pore–throat morphology. This research systematically analyzes the occurrence patterns and evolutionary trends of residual oil in low-permeability reservoirs during long-term waterflooding, providing critical theoretical insights and technical support for enhanced oil recovery and residual oil exploitation.

29 September 2025 in Electronics
Verified
Journal Article
Open access
PDF file
YSYangnan Shangguan
Yangnan Shangguan
JJJunhong Jia
Junhong Jia
WXWeiliang Xiong
Weiliang Xiong
JWJinghua Wang
Jinghua Wang
XMXianlin Ma
Xianlin Ma
ZZZHenzihao ZHANG ZHANG
ZHenzihao ZHANG ZHANG
Tight gas reservoirs present unique forecasting challenges due to steep decline rates, nonlinear production dynamics, and sensitivity to operational conditions. Conventional decline-curve methods and reservoir simulations are limited either by oversimplifying assumptions or by the need for extensive input data, although univariate deep learning models fail to fully capture external influences on well performance. To address these limitations, this study develops a transfer learning–enhanced N-BEATSx (Neural Basis Expansion Analysis Time Series with exogenous variables) framework for multivariate forecasting of tight gas well production. The model integrates exogenous variables, particularly casing pressure, with production histories to jointly represent reservoir behavior and operational effects. A pretraining dataset, comprising more than 100,000-day records from Block S of the Sulige Gas Field, was used to initialize the model, which was subsequently applied in a zero-shot setting to wells A1 and A2. Comparative analysis with the transfer learning-enhanced N-BEATS model demonstrates that N-BEATSx achieves consistently higher accuracy, with RMSE reductions of 23.9%, 39.1%, and 33.1% for Well A1 in short-, medium-, and long-term forecasts, respectively. These advances establish N-BEATSx as a robust tool for multivariate production forecasting, with direct industrial value in optimizing resource allocation, guiding development strategies, and enhancing operational decision-making in unconventional gas fields.

8 May 2026 in Processes
Verified
Journal Article
Open access
PDF file
YSYangnan Shangguan
Yangnan Shangguan
JWJinghua Wang
Jinghua Wang
KTKang Tang
Kang Tang
HGHua Guan
Hua Guan
FFFuteng Feng
Futeng Feng
TLTuo Liang
Tuo Liang
Low-permeability reservoirs at the high-water-cut stage commonly suffer from dominant water channel development, poor sweep of weakly connected zones, and inefficient mobilization of remaining oil. Existing profile control or oil displacement agents can improve either flow diversion or microscopic oil displacement, but their single-agent evaluation does not fully explain the coupled process of sweep expansion and remaining oil mobilization. To address this issue, this study focuses on a previously optimized HK-0417/ALT-603 composite system and investigates its synergistic behavior at pore, core, and well group scales. Microscopic visualization displacement experiments were used to identify streamline redistribution and remaining oil evolution. Natural core experiments were conducted to evaluate injectivity adaptability and plugging persistence. Under slug injection conditions, the Box–Behnken design was employed to optimize the injection parameters. Finally, the field pilot response was analyzed based on production data from test wells in the Changqing Oilfield. The results show that the combination system simultaneously achieves streamline expansion and residual oil reduction: the injected fluid is redistributed toward weakly swept zones, large continuous oil bodies are fragmented and dispersed, and both sweep efficiency and oil displacement efficiency are superior to those of individual agents. Natural core experiments indicate that the injection pressure difference is generally controllable in cores with permeabilities ranging from 1.76 to 7.02 mD, and the plugging rate during subsequent water flooding reaches 75.47–80.54%. Response surface optimization yields the following optimal parameter combination: profile control slug volume = 0.41 pore volume (PV), oil displacement slug volume = 0.61 PV, injection rate = 0.19 mL/min, with a corresponding predicted enhanced oil recovery (EOR) of 18.52%. In the field pilot, the cumulative injection volumes of the two injectors are 41,898 kg and 61,472 kg, respectively. The injection pressure in the well group increases from 5.8 MPa to 7.0 MPa, the comprehensive water cut decreases from 90.6% to 85.3%, and the monthly decline rate is reduced from 0.5% to 0.2%. The proposed system mainly acts by increasing flow resistance and redirecting flow in high-water-cut channels, while it enhances oil detachment through interfacial tension reduction in oil-bearing pores. After optimizing the slug parameters, the field pilot exhibits a clear phased response and promising application potential.

30 October 2026 in Gels
Verified
Journal Article
Open access
PDF file
YSYangnan Shangguan
Yangnan Shangguan
LLLei Liu
Lei Liu
JJJunhong Jia
Junhong Jia
JWJinghua Wang
Jinghua Wang
HPHan Peng
Han Peng
Tengfei WangTengfei Wang
Tengfei Wang
Long-term water flooding in heterogeneous Changqing Oilfield reservoirs leaves substantial residual oil trapped in low- and ultra-low-permeability pores, where small pore throats, strong capillarity, and high seepage resistance restrict waterflood sweep efficiency and residual oil mobilization. To address the wide carbon-number distribution, strong low-permeability heterogeneity, and fracture-induced channeling in Block X of the Changqing Oilfield, we proposed a synergistic strategy combining interfacial modification and preferential-pathway regulation. We constructed a C14(PO)4SO3Na (TDS)-synergized microsphere–microgel system comprising the interfacial modifier TDS, microspheres, and microgel particles. Core flooding showed that TDS alone outperformed conventional surfactants (Cocamidopropyl betaine, CAB-35). In heterogeneous models, the microsphere/TDS system achieved 54.45% recovery; in fractured models, microgel showed better plugging and flow-diversion performance than microspheres. Using a 0.3 PV microgel pre-slug followed by a 0.7 PV microgel/TDS mixture, Model II reached 45.58% recovery, indicating that plugging preferential pathways before synergistic flooding is an optimal injection strategy. Microvisualization revealed that water flooding readily channeled through large pores, high-permeability pathways, and fractures. In micromodel experiments, the composite system increased areal sweep efficiency to 60.4%, 49.8%, and 66.4% for low-, high-, and ultra-low-permeability models, respectively. In comparison, core flooding gave recovery factors of 54.45% (heterogeneous matrix) and 45.58% (fractured Model II). Produced-fluid and core SEM results indicated that regulating particles migrated, were retained, bridged, and possibly re-migrated in pore throats, increasing flow resistance in preferential pathways and diverting subsequent fluids to unswept zones.

30 October 2026 in Energies
Verified
Journal Article
Open access
PDF file
JZJin Zhou
Jin Zhou
YYYao Yan
Yao Yan
YZYongqiang Zhang
Yongqiang Zhang
CZChuanbao Zhang
Chuanbao Zhang
SZShan Zeng
Shan Zeng
QZQiuyang Zhao
Qiuyang Zhao
Air-foam flooding combines gas-assisted displacement, foam mobility control, and surfactant-induced interfacial tension reduction in ultra-low-permeability reservoirs. A three-dimensional mechanistic model informed by a field-scale reservoir model was used to compare six displacement cases, reservoir-property responses, and injection schedules. The final recovery factors for baseline waterflooding, gas-assisted flooding, surfactant-background flooding, foam mobility control, interfacial tension reduction, and integrated air-foam flooding were 38.14%, 40.50%, 40.81%, 42.03%, 41.44%, and 47.79%, respectively. Relative to the surfactant-background case, activating foam mobility control alone increased recovery by 1.22%, whereas activating interfacial tension reduction alone increased it by 0.63%. Activating both increased recovery by 6.98%, including a 5.13% non-additive term that suggests a potential interaction between foam plugging and surfactant-enhanced oil displacement under the modeled conditions. Within the tested ranges, the normalized sensitivity weights for permeability contrast, the vertical-to-horizontal permeability ratio, and average permeability were 41.13%, 34.79%, and 24.08%, respectively. Within the parameter ranges investigated in this model, the single-factor results indicated favorable recovery performance at permeability contrasts not exceeding 10, vertical-to-horizontal permeability ratios of at least 0.4, and average permeabilities of at least 4 mD. A gas-to-liquid ratio of 1:1 produced the highest final recovery among the ratios tested. With the same prescribed total injection volume, shortening the alternating injection interval from 24 to 3 months increased final recovery from 47.60% to 48.40%. Switching at water cuts no higher than 85% avoided the lower recovery associated with the latest switching case. These findings provide a quantitative basis for reservoir screening and injection scheme design of air-foam flooding.