Thomas Reindl

Mr. Thomas Reindl

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2025 in Welding in the World
Verified
Journal Article
Open access
PDF file
TRThomas Reindl
Thomas Reindl
NHNico Hempel
Nico Hempel
Peter MayrPeter Mayr
Peter Mayr
Arc-based directed energy deposition (DED-Arc) is a promising manufacturing technology on the rise in the industry. On the one hand, convincing process advantages, such as the possibility of sustainably producing complex and large-volume component geometries with comparatively high building rates, favor further industrial interest. On the other hand, there are still challenges, like the difficulty of controlling heat input and the intricate thermal history. The resulting temperature gradients and heat accumulations lead to inhomogeneous component properties and reduced process efficiency, which delays further establishment in the manufacturing industry. Therefore, implementing and developing concepts for thermal management in DED-Arc is necessary. The study examines how controlling the substrate temperature can affect the dimensional accuracy, microstructure, and hardness of DED-Arc components. Different preheating and in situ cooling strategies were developed based on numerical investigations, including a water-cooled in situ cooling unit, a cobot-guided inductor, and classical preheating approaches. The findings indicate that substrate tempering significantly impacts the penetration zone and heat-affected zone dimensions, layer widths, microstructure, and hardness profiles. A special combination of preheating and in situ cooling resulted in enhanced substrate bonding, uniform layer widths (4.0 ± 0.1) mm, and consistent hardness values (142 ± 10) HV due to a more uniform microstructure. These results indicate that integrated substrate plate tempering can significantly improve thermal process control in DED-Arc, supporting its further industrial establishment.

14 January 2026 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
TRThomas Reindl
Thomas Reindl
SRStefan Rotzsche
Stefan Rotzsche
NHNico Hempel
Nico Hempel
Peter MayrPeter Mayr
Peter Mayr
The acceptance of Directed Energy Deposition with Arc (DED-Arc) in industrial applications is increasing due to ongoing research and development. A key challenge is maintaining temperature control, which affects process efficiency, sustainability, and the properties of the components. There is a need to actively modify the thermal conditions during the process to flexibly optimize the manufacturing quality and efficiency. This work aims to design and validate an advanced wire-based DED-Arc process with closed-loop temperature control and in-situ heat treatment for various applications. The existing DED-Arc system was enhanced by integrating cobot-guided in-situ cooling with nitrogen, water, and air, as well as an inductor for localized heat input. Different control configurations were applied to enable a fully automated temperature-controlled process. The findings show that the basic in-situ cooling concepts can reduce waiting times by up to $$\:\sim$$ 65%. Scaling and integrating these concepts into a control system enabled the production of components using ER100S-G without any cooling pauses, despite an interlayer temperature of ≤ 200 °C. Compared to the reference without thermal management, specific in-situ cooling increased the offset yield strength (R p0.2 ) by over 100 MPa, while targeted heat input raised the plastic elongation at fracture to over 40%. It was also possible to precisely demonstrate heat treatment with significantly varying hardness profiles of up to 150 HV and corresponding microstructural and phase changes within a single component. Validation tests showed that temperature control can effectively optimize the DED-Arc process, emphasizing the need for further research on flexible, autonomous thermal management.

9 July 2026 in Multiscale and Multidisciplinary Modeling, Experiments and Design
Verified
Journal Article
Open access
TRThomas Reindl
Thomas Reindl
CKC. Koenig
C. Koenig
AAA. Aslam
A. Aslam
Josip VincicJosip Vincic
Josip Vincic
JJJoerg R Jinschek
Joerg R Jinschek
Peter MayrPeter Mayr
Peter Mayr


Verified
Journal Article
Open access
PDF file
TRThomas Reindl
Thomas Reindl
GSGeorgij Safronov
Georgij Safronov
SRStefan Rotzsche
Stefan Rotzsche
TATom-Eric Adams
Tom-Eric Adams
Peter MayrPeter Mayr
Peter Mayr
Josip VincicJosip Vincic
Josip Vincic
Wire-arc directed energy deposition (WA-DED) using dynamic multi-axis hardware is typically restricted to a neutral position (90°), limiting process flexibility and full exploitation of multi-axis capabilities. To unlock torch positioning and stick-out distance as levers for tailored process manipulation, this study examines energy distribution across 124 samples using ER70S-6 filler wire. A 6 × 6 process window spanning wire feed speed (WFS = 2–7 m/min) and travel speed (v = 400–900 mm/min) was evaluated alongside continuous stick-out ramps (5–35 mm) and ten torch inclinations in push (45°, 60°, 75°), neutral (90°), drag (105°, 120°, 135°), and lateral (L15°, L30°, L45°) orientations. A synchronized multi-sensor framework captured electrical, thermographic, and melt pool dynamics while integrating airborne sound acoustic monitoring of process instabilities. Metallographic cross-sections, microhardness mapping, and EBSD grain analysis indicated microstructural shifts. Across the parameter matrix, volumetric energy density (VED) remained within 19–23 J/mm3 (measured), while thermal tracking revealed progressive heat accumulation. Stick-out extensions reduced heat input by 1.1–1.5%/mm, raising peak hardness in single beads from 290–310 HV to 350–385 HV. Torch orientation redistributed thermal energy at nearly constant heat and mass input. In the walls tested, melt pool length shifted by up to 30% and mean grain size by 11.1%, and penetration depth followed the push to drag sequence. Short-circuit frequency and cycle-period variation mirrored the approach to the humping limit, and acoustic envelope statistics accompanied overmelting. Thus, torch orientation and stick-out provide sensor-observable levers to influence process dynamics and component properties.