Qingjun Ding

Dr. Qingjun Ding


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2024 in Coatings
Verified
Journal Article
Open access
PDF file
ZYZi Yu
Zi Yu
CLChenxi Liu
Chenxi Liu
Jinhui LiJinhui Li
Jinhui Li
JWJing Wu
Jing Wu
XMXueting Ma
Xueting Ma
QDQingjun Ding
Qingjun Ding
Lightweight aggregate concrete, known for its light weight, thermal insulation, and excellent durability, has garnered significant attention and is considered an ideal material for lightweight ultra-high-performance concrete. Previous research has discovered that prewetting lightweight aggregates can continuously release water during the setting and hardening process of concrete, providing internal curing. However, the moisture release behavior of prewetted lightweight aggregates under different temperature and humidity conditions, as well as their internal curing mechanisms in low water–cement ratio mixtures, remains unclear and requires further investigation. In response to environmental sustainability, this study utilizes industrial waste γ-C2S to produce a high-strength carbonized γ-C2S lightweight aggregate (CC) and primarily compares the water absorption and release characteristics of three different types of lightweight aggregates, focusing on the influence of curing temperature and humidity on the water release behavior of the prewetted CC and establishing a water release model for the prewetted CC in cement-based materials. The experimental results indicate that the water absorption rates of the self-made high-performance lightweight aggregate (CC), magnesian lightweight aggregate (MC), and shale lightweight aggregate (SC) conform to the typical Boxlucas equation. In an air environment, the CC has the longest water release duration, followed by the MC, with the SC being the fastest. The water storage performance of the prewetted SC was poor, while the 100% prewetted CC exhibited better water storage during the mixing stage. When the CC is 100% prewetted, it can significantly increase the free water content in the interfacial transition zone, aiding in the hydration of the interfacial transition zone and enhancing the efficiency of shrinkage compensation by the expansive agent. This improvement contributes to the mechanical strength and volumetric stability of cement-based materials.

23 November 2024 in Coatings
Verified
Journal Article
Open access
PDF file
THTusheng He
Tusheng He
WXWei Xie
Wei Xie
FWFeng Wang
Feng Wang
ZYZi Yu
Zi Yu
Fang XuFang Xu
Fang Xu
HYHaibin Yu
Haibin Yu
To further enhance the abrasion resistance of UHPC in demanding abrasion environments, this study investigated the effects of graphene oxide (GO) on the workability, mechanical properties, and abrasion resistance of UHPC. Utilizing 27Al Nuclear Magnetic Resonance (NMR), 29Si NMR, microhardness, and BET analysis, the study analyzed the mechanisms through which GO influences UHPC’s microstructure in terms of abrasion resistance. Additionally, molecular dynamics simulations were employed to examine the mechanisms by which GO enhances UHPC’s abrasion resistance at the nano and micron scale. The findings show that an optimal amount of GO can improve the mechanical properties and abrasion resistance of UHPC. When 0.03% of GO (by cementitious material mass) was incorporated, the impact on workability was minimal, yet compressive strength increased by approximately 1.80%, flexural strength by 3.02%, impact wear resistance by 1.78%, the abrasion loss rate decreased by 10.01%, ultimate impact energy increased by 1.76%, and the toughness index improved by 10.10%. GO enhances abrasion-resistant UHPC primarily by increasing hydration, refining pore structure, and improving the microstructure of the interfacial transition zone. While GO increases the hydration degree of the UHPC matrix, it does not alter the silicate chain in C-A-S-H gels within the paste. Additionally, the incorporation of graphene oxide can refine the pore structure of the UHPC cement paste and improve the microstructure of the interfacial transition zone (ITZ) between the aggregate and the cement paste. The molecular dynamics simulation reveals that, under abrasive forces, GO forms strong, stable chemical bonds with the C-A-S-H base atoms, significantly enhancing the abrasion resistance of C-A-S-H.