Tusheng He

Mr. Tusheng He


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2024 in Coatings
Verified
Journal Article
Open access
PDF file
THTusheng He
Tusheng He
WXWei Xie
Wei Xie
FWFeng Wang
Feng Wang
ZYZi Yu
Zi Yu
Fang XuFang Xu
Fang Xu
HYHaibin Yu
Haibin Yu
To further enhance the abrasion resistance of UHPC in demanding abrasion environments, this study investigated the effects of graphene oxide (GO) on the workability, mechanical properties, and abrasion resistance of UHPC. Utilizing 27Al Nuclear Magnetic Resonance (NMR), 29Si NMR, microhardness, and BET analysis, the study analyzed the mechanisms through which GO influences UHPC’s microstructure in terms of abrasion resistance. Additionally, molecular dynamics simulations were employed to examine the mechanisms by which GO enhances UHPC’s abrasion resistance at the nano and micron scale. The findings show that an optimal amount of GO can improve the mechanical properties and abrasion resistance of UHPC. When 0.03% of GO (by cementitious material mass) was incorporated, the impact on workability was minimal, yet compressive strength increased by approximately 1.80%, flexural strength by 3.02%, impact wear resistance by 1.78%, the abrasion loss rate decreased by 10.01%, ultimate impact energy increased by 1.76%, and the toughness index improved by 10.10%. GO enhances abrasion-resistant UHPC primarily by increasing hydration, refining pore structure, and improving the microstructure of the interfacial transition zone. While GO increases the hydration degree of the UHPC matrix, it does not alter the silicate chain in C-A-S-H gels within the paste. Additionally, the incorporation of graphene oxide can refine the pore structure of the UHPC cement paste and improve the microstructure of the interfacial transition zone (ITZ) between the aggregate and the cement paste. The molecular dynamics simulation reveals that, under abrasive forces, GO forms strong, stable chemical bonds with the C-A-S-H base atoms, significantly enhancing the abrasion resistance of C-A-S-H.

9 October 2013
Verified
Conference Paper
Closed access
THTusheng He
Tusheng He
XZXuguang Zhao
Xuguang Zhao
SZSanyin Zhao
Sanyin Zhao
ZLzaibo li
zaibo li
YLYunlong Lin
Yunlong Lin
Concrete permeable brick is a kind of new road pavement material with high permeability and high strength; the mix design is different from ordinary concrete. According to the basic properties of aggregate and workability of fresh permeable brick mixture, a suitable mix design method based on target porosity is introduced. The design method is that the aggregate amount per unit volume of permeable brick is determined according to the aggregate close-packing density first; the theory water consumption is calculated based on the specific absorption of aggregate and hydration of cement second; the amount of cementitious materials is calculated by the apparent density of material, void ratio of aggregate, and target porosity of permeable brick third; and the actual water consumption is determined according to the molding process and workability of mixture finally. The test result indicates that the mix design method of permeable brick is feasible.

6 November 2026 in Polymers
Verified
Journal Article
Open access
PDF file
QZQihang Zhou
Qihang Zhou
HFHaobing Fu
Haobing Fu
NFNingyang Feng
Ningyang Feng
THTusheng He
Tusheng He
HCHuaqiang Cheng
Huaqiang Cheng
QDQingjun Ding
Qingjun Ding
High-strength concrete applied in mass concrete structures typically features low water-to-binder ratios and high binder contents, resulting in intense hydration heat evolution and pronounced shrinkage deformation; when coupled with its inherently limited tensile strain capacity, the material is highly susceptible to cracking, thereby compromising long-term structural durability. To actively mitigate shrinkage deformation and reduce cracking risk, high-modulus heat-shrinkable fibers were incorporated into cementitious materials. Their thermal shrinkage behavior and the resulting effects on the mechanical properties and shrinkage performance of mortar were systematically investigated. The results showed that the fibers exhibited a pronounced thermally activated shrinkage response within the temperature range of 50–90 °C, with tensile strength exceeding 600 MPa and elastic modulus greater than 9 GPa. The shrinkage ratio increased significantly with temperature and reached 2.80% at 90 °C, corresponding to a maximum calculated recovery stress of 14.79 MPa. Temperature was identified as the dominant factor governing fiber shrinkage behavior, whereas the influence of initial fiber length was negligible. Incorporation of heat-shrinkable fibers effectively enhanced the overall performance of mortar. An optimum fiber length of 12 mm and volume fraction of 0.3% provided the best balance between strength development and shrinkage reduction. Under these conditions, the 28-day flexural and compressive strengths exceeded 12.5 MPa and 75.0 MPa, respectively, while the 28-day drying shrinkage was reduced by 49.5% in the dosage-screening series and by 54.7% in the independent validation series (233 με); the lowest absolute 28-day shrinkage (220 με) was obtained at 0.5% fiber content, but at the cost of flowability and compressive strength. Under steam curing the fibers were activated further and the mortar reached 13.2 MPa and 77.8 MPa; the same regime did not raise the strength of the plain matrix above its standard-cured value. The significant reduction in drying shrinkage and improved flexural behavior is attributed to the combined effects of fiber bridging and thermally induced shrinkage stress. The contraction of activated fibers is inferred to induce localized pre-compressive effects within the matrix, which can help counteract shrinkage-induced tensile stress, thereby reducing the driving force for early-age microcracking.