With the increase in energy consumption, resources are decreasing while costs are rising. The Covid-19 pandemic and wars in some countries have also led to increased costs. Considering the environmental damage, the search for new energy sources and the demand for existing renewable energy sources have increased. Among renewable energy sources, wind energy is one of the most prominent energy sources due to its environmental friendliness. In recent years, studies on wind characteristics and wind energy distribution have been conducted in many parts of the world. But, it has not been conducted that a detailed study using different probability density functions specifically for Sivas province in Türkiye. This study investigated the wind energy potential for Sivas province using various probability density functions. Data from two nearby stations were used in the calculations. Despite the proximity of the stations, it was determined that the emerging wind trends showed some differences. For Station A, it is observed that probability density functions other than Rayleigh provide a better fit, especially at low wind speeds. However, deviations from actual values are observed at certain wind speeds. For Station B, functions other than Weibull show a better fit, although it can be said that the wind characteristics are more irregular in the winter season, and the predicted functions do not provide a better fit. Stations A and B exhibited different wind characteristics, except for the autumn season. It was observed that collecting data and analyzing wind power at the site where a wind farm will be established is quite important. As a result of the study, it was concluded that the potential wind powers at both stations were quite low and not very suitable for wind farm installation.
Ground source heat pumps (GSHP) offer a clean and sustainable energy solution by using ground heat as a heat source. Various machine learning techniques are used to estimate coefficient of performance (COP), one of the key metrics for evaluating ground source heat pump systems. In this study, three different machine learning methods, Artificial Neural Network (ANN), Support Vector Machines (SVM) and Gaussian Process Regression (GPR), were used to estimate the performance of the system, using measurements made on an experimental GSHP system established in Sivas province of Turkey. Five different combinations are recommended for each method. Training and testing data were used to evaluate the effectiveness of each method in estimating the COP in the GSHP system. In the first stage, ANN, SVM and GPR models were trained on training data, and in the second stage, validation was carried out with test data. The statistical results obtained show that all three machine learning methods are successful in estimating COP in the GSHP system. R2 values of the model MIP1 in which all variables are used are determined as 0.9726 for ANN, 0.9543 for SVM, and 0.9650 for GPR. This study has demonstrated that different machine learning models can be used as an effective method for predicting the performance of GSHP systems. Additionally, by comparing the applicability and performance of these models, it provides information on determining the most appropriate model that can be used to increase the energy efficiency of GSHP systems and optimize costs.
28 March 2024 in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
Isı pompaları, binalarda soğutma ve ısıtma için kullanılan konvansiyonel sistemlere verimli ve ulaşılabilir alternatiflerdir. Isı kaynağı olarak toprak ısısını kullanan toprak kaynaklı ısı pompaları (TKIP), ısıtma ve soğutma yüklerini temiz ve sürdürülebilir bir şekilde karşılamak için umut verici teknolojilerdir. TKIP, kurulum ve işletme maliyetleri yüksek olan bir sistemdir. Bu nedenle verimlilik açısından farklı sektörlerde kullanımı uygun olan TKIP sistemini kurmadan performans analizleri yapılabilir olması çok önemlidir. Sistemler kurulmadan önce performans değerlerinin tahmin edilebilecek olduğu modeller ile değerlendirilmesi yaklaşımdan yola çıkılarak, ısı pompası ve sistemin performansı ve yoğuşturucudan atılan ısıyı tahmin etmek için bir yapay sinir ağı (YSA) modeli önerilmektedir. Yapay sinir ağları ile regresyon analizi, girdi ve çıkış verileri arasındaki karmaşık ilişkileri öğrenme yeteneğine sahip bir makine öğrenimi yöntemidir ve problemlerindeki non-lineer ilişkileri etkili bir şekilde modelleyebilir. Sivas ilinde Kurulan deneysel sistem ile ölçülen veriler, YSA'yı eğitmek için eğitim verisi ve test verisi olarak ayrılmıştır ve modelin ilk aşamasında eğitim verisi; ikinci aşamasında ise test verisi kullanılmıştır. Sunulan çalışmada, yatay TKIP’ın performans katsayısını tahmin etmek için çeşitli uygulamalarda kullanılmış ve özellikle sistem modelleme ve sistem tanımlamada yararlı oldukları gösterilmiş yapay sinir ağlarının uygulanabilirliği ortaya konulmuştur. Bu çalışmanın sonucunda, ısı pompası COP R2 değeri 0,9733, TKIP sistemi COP R2 değeri 0,9896 ve yoğuşturucudan atılan ısının YSA modelinin R2 değeri 0,9878 olduğu tespit edilmiştir. Üretilen istatistiksel belirleyiciler üzerinden yola çıkılarak YSA'ların TKIP sisteminde doğru bir yöntem olarak COP tahmini için kullanılabileceği sonucuna varılmıştır.
25 December 2024 in International Journal of Energy Studies
Thermoacoustic refrigerator (TAR) is one of the best technologies accepted as an alternative to traditional cooling systems. Factors such as the fact that TAR systems have minimum environmental and human health problems such as global warming and ozone layer depletion, being lightweight and having no moving parts make these systems seen as promising clean technologies in the future. TAR creates a cooling effect by converting acoustic energy into thermal energy. In this research, a quarter wave standing wave thermoacoustic refrigerator using air as the working fluid and a speaker as an acoustic power source was designed and simulated. An algorithm suitable for the literature on thermoacoustics was used in the design. Simplified linear theory was used in this algorithm and the designed standing wave TAR model was simulated with the Design Environment for Low Amplitude Thermo Acoustic Energy Conversion (DeltaEC) program. In the study, the changes of various parameters along the resonator length were examined and the results were given graphically. Design and simulation cooling coefficient of performance (COP) results were 2.236 and 1.036 respectively.
9 October 2024 in The European Physical Journal Plus
In this study, a simple thermoacoustic refrigerator system experiment set was established by using the design parameters in accordance with the relevant literature. In the experimental setup, a loudspeaker was used as acoustic power source and a suitable frequency value was determined for the system. Three kinds of stack materials with different thermal conductivity coefficients, respectively, mylar, cotton and glass wool were placed in the resonance tube. The temperature values at both ends of the stack material were measured by placed temperature gauges. In the measurements made within the same time period, the temperature differences were measured as 5.2°C for mylar, 4.7°C for cotton and 4.3°C for glass wool, respectively. It was determined that the highest temperature difference was in the mylar material.